mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 17:38:51 +09:00
![York Sun](/assets/img/avatar_default.png)
P1010RDB and p1_pc_rdb_pc has incorrect configuration for CONFIG_DDR_RAW_TIMING. It should be CONFIG_SYS_DDR_RAW_TIMING. Incorrect setting causes DDR failure in case of SPD absent. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
293 lines
7.2 KiB
C
293 lines
7.2 KiB
C
/*
|
|
* Copyright 2010-2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* Version 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/fsl_ddr_sdram.h>
|
|
#include <asm/fsl_ddr_dimm_params.h>
|
|
#include <asm/io.h>
|
|
#include <asm/fsl_law.h>
|
|
|
|
#ifdef CONFIG_SYS_DDR_RAW_TIMING
|
|
#if defined(CONFIG_P1020RDB_PROTO) || \
|
|
defined(CONFIG_P1021RDB) || \
|
|
defined(CONFIG_P1020UTM)
|
|
/* Micron MT41J256M8_187E */
|
|
dimm_params_t ddr_raw_timing = {
|
|
.n_ranks = 1,
|
|
.rank_density = 1073741824u,
|
|
.capacity = 1073741824u,
|
|
.primary_sdram_width = 32,
|
|
.ec_sdram_width = 0,
|
|
.registered_dimm = 0,
|
|
.mirrored_dimm = 0,
|
|
.n_row_addr = 15,
|
|
.n_col_addr = 10,
|
|
.n_banks_per_sdram_device = 8,
|
|
.edc_config = 0,
|
|
.burst_lengths_bitmask = 0x0c,
|
|
|
|
.tCKmin_X_ps = 1870,
|
|
.caslat_X = 0x1e << 4, /* 5,6,7,8 */
|
|
.tAA_ps = 13125,
|
|
.tWR_ps = 15000,
|
|
.tRCD_ps = 13125,
|
|
.tRRD_ps = 7500,
|
|
.tRP_ps = 13125,
|
|
.tRAS_ps = 37500,
|
|
.tRC_ps = 50625,
|
|
.tRFC_ps = 160000,
|
|
.tWTR_ps = 7500,
|
|
.tRTP_ps = 7500,
|
|
.refresh_rate_ps = 7800000,
|
|
.tFAW_ps = 37500,
|
|
};
|
|
#elif defined(CONFIG_P2020RDB)
|
|
/* Micron MT41J128M16_15E */
|
|
dimm_params_t ddr_raw_timing = {
|
|
.n_ranks = 1,
|
|
.rank_density = 1073741824u,
|
|
.capacity = 1073741824u,
|
|
.primary_sdram_width = 64,
|
|
.ec_sdram_width = 0,
|
|
.registered_dimm = 0,
|
|
.mirrored_dimm = 0,
|
|
.n_row_addr = 14,
|
|
.n_col_addr = 10,
|
|
.n_banks_per_sdram_device = 8,
|
|
.edc_config = 0,
|
|
.burst_lengths_bitmask = 0x0c,
|
|
|
|
.tCKmin_X_ps = 1500,
|
|
.caslat_X = 0x7e << 4, /* 5,6,7,8,9,10 */
|
|
.tAA_ps = 13500,
|
|
.tWR_ps = 15000,
|
|
.tRCD_ps = 13500,
|
|
.tRRD_ps = 6000,
|
|
.tRP_ps = 13500,
|
|
.tRAS_ps = 36000,
|
|
.tRC_ps = 49500,
|
|
.tRFC_ps = 160000,
|
|
.tWTR_ps = 7500,
|
|
.tRTP_ps = 7500,
|
|
.refresh_rate_ps = 7800000,
|
|
.tFAW_ps = 30000,
|
|
};
|
|
#elif defined(CONFIG_P1020MBG)
|
|
/* Micron MT41J512M8_187E */
|
|
dimm_params_t ddr_raw_timing = {
|
|
.n_ranks = 2,
|
|
.rank_density = 1073741824u,
|
|
.capacity = 2147483648u,
|
|
.primary_sdram_width = 32,
|
|
.ec_sdram_width = 0,
|
|
.registered_dimm = 0,
|
|
.mirrored_dimm = 0,
|
|
.n_row_addr = 15,
|
|
.n_col_addr = 10,
|
|
.n_banks_per_sdram_device = 8,
|
|
.edc_config = 0,
|
|
.burst_lengths_bitmask = 0x0c,
|
|
|
|
.tCKmin_X_ps = 1870,
|
|
.caslat_X = 0x1e << 4, /* 5,6,7,8 */
|
|
.tAA_ps = 13125,
|
|
.tWR_ps = 15000,
|
|
.tRCD_ps = 13125,
|
|
.tRRD_ps = 7500,
|
|
.tRP_ps = 13125,
|
|
.tRAS_ps = 37500,
|
|
.tRC_ps = 50625,
|
|
.tRFC_ps = 160000,
|
|
.tWTR_ps = 7500,
|
|
.tRTP_ps = 7500,
|
|
.refresh_rate_ps = 7800000,
|
|
.tFAW_ps = 37500,
|
|
};
|
|
#elif defined(CONFIG_P1020RDB)
|
|
/*
|
|
* Samsung K4B2G0846C-HCF8
|
|
* The following timing are for "downshift"
|
|
* i.e. to use CL9 part as CL7
|
|
* otherwise, tAA, tRCD, tRP will be 13500ps
|
|
* and tRC will be 49500ps
|
|
*/
|
|
dimm_params_t ddr_raw_timing = {
|
|
.n_ranks = 1,
|
|
.rank_density = 1073741824u,
|
|
.capacity = 1073741824u,
|
|
.primary_sdram_width = 32,
|
|
.ec_sdram_width = 0,
|
|
.registered_dimm = 0,
|
|
.mirrored_dimm = 0,
|
|
.n_row_addr = 15,
|
|
.n_col_addr = 10,
|
|
.n_banks_per_sdram_device = 8,
|
|
.edc_config = 0,
|
|
.burst_lengths_bitmask = 0x0c,
|
|
|
|
.tCKmin_X_ps = 1875,
|
|
.caslat_X = 0x1e << 4, /* 5,6,7,8 */
|
|
.tAA_ps = 13125,
|
|
.tWR_ps = 15000,
|
|
.tRCD_ps = 13125,
|
|
.tRRD_ps = 7500,
|
|
.tRP_ps = 13125,
|
|
.tRAS_ps = 37500,
|
|
.tRC_ps = 50625,
|
|
.tRFC_ps = 160000,
|
|
.tWTR_ps = 7500,
|
|
.tRTP_ps = 7500,
|
|
.refresh_rate_ps = 7800000,
|
|
.tFAW_ps = 37500,
|
|
};
|
|
#elif defined(CONFIG_P1024RDB) || \
|
|
defined(CONFIG_P1025RDB)
|
|
/*
|
|
* Samsung K4B2G0846C-HCH9
|
|
* The following timing are for "downshift"
|
|
* i.e. to use CL9 part as CL7
|
|
* otherwise, tAA, tRCD, tRP will be 13500ps
|
|
* and tRC will be 49500ps
|
|
*/
|
|
dimm_params_t ddr_raw_timing = {
|
|
.n_ranks = 1,
|
|
.rank_density = 1073741824u,
|
|
.capacity = 1073741824u,
|
|
.primary_sdram_width = 32,
|
|
.ec_sdram_width = 0,
|
|
.registered_dimm = 0,
|
|
.mirrored_dimm = 0,
|
|
.n_row_addr = 15,
|
|
.n_col_addr = 10,
|
|
.n_banks_per_sdram_device = 8,
|
|
.edc_config = 0,
|
|
.burst_lengths_bitmask = 0x0c,
|
|
|
|
.tCKmin_X_ps = 1500,
|
|
.caslat_X = 0x3e << 4, /* 5,6,7,8,9 */
|
|
.tAA_ps = 13125,
|
|
.tWR_ps = 15000,
|
|
.tRCD_ps = 13125,
|
|
.tRRD_ps = 6000,
|
|
.tRP_ps = 13125,
|
|
.tRAS_ps = 36000,
|
|
.tRC_ps = 49125,
|
|
.tRFC_ps = 160000,
|
|
.tWTR_ps = 7500,
|
|
.tRTP_ps = 7500,
|
|
.refresh_rate_ps = 7800000,
|
|
.tFAW_ps = 30000,
|
|
};
|
|
#else
|
|
#error Missing raw timing data for this board
|
|
#endif
|
|
|
|
int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
|
|
unsigned int controller_number,
|
|
unsigned int dimm_number)
|
|
{
|
|
const char dimm_model[] = "Fixed DDR on board";
|
|
|
|
if ((controller_number == 0) && (dimm_number == 0)) {
|
|
memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
|
|
memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
|
|
memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_SYS_DDR_RAW_TIMING */
|
|
|
|
/* Fixed sdram init -- doesn't use serial presence detect. */
|
|
phys_size_t fixed_sdram(void)
|
|
{
|
|
sys_info_t sysinfo;
|
|
char buf[32];
|
|
size_t ddr_size;
|
|
fsl_ddr_cfg_regs_t ddr_cfg_regs = {
|
|
.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
|
|
.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
|
|
.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
|
|
#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
|
|
.cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
|
|
.cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
|
|
.cs[1].config_2 = CONFIG_SYS_DDR_CS1_CONFIG_2,
|
|
#endif
|
|
.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3,
|
|
.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0,
|
|
.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1,
|
|
.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2,
|
|
.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
|
|
.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
|
|
.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1,
|
|
.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2,
|
|
.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
|
|
.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL,
|
|
.ddr_data_init = CONFIG_SYS_DDR_DATA_INIT,
|
|
.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL,
|
|
.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
|
|
.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
|
|
.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
|
|
.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
|
|
.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
|
|
.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL,
|
|
.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
|
|
.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
|
|
.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
|
|
};
|
|
|
|
get_sys_info(&sysinfo);
|
|
printf("Configuring DDR for %s MT/s data rate\n",
|
|
strmhz(buf, sysinfo.freqDDRBus));
|
|
|
|
ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
|
|
|
|
fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
|
|
|
|
if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
|
|
ddr_size, LAW_TRGT_IF_DDR_1) < 0) {
|
|
printf("ERROR setting Local Access Windows for DDR\n");
|
|
return 0;
|
|
};
|
|
|
|
return ddr_size;
|
|
}
|
|
|
|
void fsl_ddr_board_options(memctl_options_t *popts,
|
|
dimm_params_t *pdimm,
|
|
unsigned int ctrl_num)
|
|
{
|
|
int i;
|
|
popts->clk_adjust = 6;
|
|
popts->cpo_override = 0x1f;
|
|
popts->write_data_delay = 2;
|
|
popts->half_strength_driver_enable = 1;
|
|
/* Write leveling override */
|
|
popts->wrlvl_en = 1;
|
|
popts->wrlvl_override = 1;
|
|
popts->wrlvl_sample = 0xf;
|
|
popts->wrlvl_start = 0x8;
|
|
popts->trwt_override = 1;
|
|
popts->trwt = 0;
|
|
|
|
if (pdimm->primary_sdram_width == 64)
|
|
popts->data_bus_width = 0;
|
|
else if (pdimm->primary_sdram_width == 32)
|
|
popts->data_bus_width = 1;
|
|
else
|
|
printf("Error in DDR bus width configuration!\n");
|
|
|
|
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
|
|
popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
|
|
popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
|
|
}
|
|
}
|