mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 01:18:52 +09:00
![Anatolij Gustschin](/assets/img/avatar_default.png)
Add support for i.MX8X based Capricorn Giedi SoM. Supported interfaces: GPIO, ENET, eMMC, I2C, UART. Console output: U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) Trying to boot from MMC1 Load image from MMC/SD 0x3e400 U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07 CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C Model: Siemens Giedi Board: Capricorn Boot: MMC0 DRAM: 1022 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial@5a080000 Out: serial@5a080000 Err: serial@5a080000 Net: eth1: ethernet@5b050000 [PRIME] Autobooting in 1 seconds, press "<Esc><Esc>" to stop Signed-off-by: Anatolij Gustschin <agust@denx.de>
415 lines
9.7 KiB
C
415 lines
9.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
*
|
|
* Read FactorySet information from EEPROM into global structure.
|
|
* (C) Copyright 2013 Siemens Schweiz AG
|
|
*/
|
|
|
|
#if !defined(CONFIG_SPL_BUILD)
|
|
|
|
#include <common.h>
|
|
#include <env.h>
|
|
#include <dm.h>
|
|
#include <env_internal.h>
|
|
#include <i2c.h>
|
|
#include <asm/io.h>
|
|
#if !CONFIG_IS_ENABLED(TARGET_GIEDI) && !CONFIG_IS_ENABLED(TARGET_DENEB)
|
|
#include <asm/arch/cpu.h>
|
|
#endif
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/unaligned.h>
|
|
#include <net.h>
|
|
#include <errno.h>
|
|
#include <g_dnl.h>
|
|
#include "factoryset.h"
|
|
|
|
#define EEPR_PG_SZ 0x80
|
|
#define EEPROM_FATORYSET_OFFSET 0x400
|
|
#define OFF_PG EEPROM_FATORYSET_OFFSET/EEPR_PG_SZ
|
|
|
|
/* Global variable that contains necessary information from FactorySet */
|
|
struct factorysetcontainer factory_dat;
|
|
|
|
#define fact_get_char(i) *((char *)&eeprom_buf[i])
|
|
|
|
static int fact_match(unsigned char *eeprom_buf, uchar *s1, int i2)
|
|
{
|
|
if (s1 == NULL)
|
|
return -1;
|
|
|
|
while (*s1 == fact_get_char(i2++))
|
|
if (*s1++ == '=')
|
|
return i2;
|
|
|
|
if (*s1 == '\0' && fact_get_char(i2-1) == '=')
|
|
return i2;
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int get_factory_val(unsigned char *eeprom_buf, int size, uchar *name,
|
|
uchar *buf, int len)
|
|
{
|
|
int i, nxt = 0;
|
|
|
|
for (i = 0; fact_get_char(i) != '\0'; i = nxt + 1) {
|
|
int val, n;
|
|
|
|
for (nxt = i; fact_get_char(nxt) != '\0'; ++nxt) {
|
|
if (nxt >= size)
|
|
return -1;
|
|
}
|
|
|
|
val = fact_match(eeprom_buf, (uchar *)name, i);
|
|
if (val < 0)
|
|
continue;
|
|
|
|
/* found; copy out */
|
|
for (n = 0; n < len; ++n, ++buf) {
|
|
*buf = fact_get_char(val++);
|
|
if (*buf == '\0')
|
|
return n;
|
|
}
|
|
|
|
if (n)
|
|
*--buf = '\0';
|
|
|
|
printf("env_buf [%d bytes] too small for value of \"%s\"\n",
|
|
len, name);
|
|
|
|
return n;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static
|
|
int get_factory_record_val(unsigned char *eeprom_buf, int size, uchar *record,
|
|
uchar *name, uchar *buf, int len)
|
|
{
|
|
int ret = -1;
|
|
int i, nxt = 0;
|
|
int c;
|
|
unsigned char end = 0xff;
|
|
unsigned char tmp;
|
|
|
|
for (i = 0; fact_get_char(i) != end; i = nxt) {
|
|
nxt = i + 1;
|
|
if (fact_get_char(i) == '>') {
|
|
int pos;
|
|
int endpos;
|
|
int z;
|
|
int level = 0;
|
|
|
|
c = strncmp((char *)&eeprom_buf[i + 1], (char *)record,
|
|
strlen((char *)record));
|
|
if (c == 0) {
|
|
/* record found */
|
|
pos = i + strlen((char *)record) + 2;
|
|
nxt = pos;
|
|
/* search for "<" */
|
|
c = -1;
|
|
for (z = pos; fact_get_char(z) != end; z++) {
|
|
if (fact_get_char(z) == '<') {
|
|
if (level == 0) {
|
|
endpos = z;
|
|
nxt = endpos;
|
|
c = 0;
|
|
break;
|
|
} else {
|
|
level--;
|
|
}
|
|
}
|
|
if (fact_get_char(z) == '>')
|
|
level++;
|
|
}
|
|
} else {
|
|
continue;
|
|
}
|
|
if (c == 0) {
|
|
/* end found -> call get_factory_val */
|
|
tmp = eeprom_buf[endpos];
|
|
eeprom_buf[endpos] = end;
|
|
ret = get_factory_val(&eeprom_buf[pos],
|
|
endpos - pos, name, buf, len);
|
|
/* fix buffer */
|
|
eeprom_buf[endpos] = tmp;
|
|
debug("%s: %s.%s = %s\n",
|
|
__func__, record, name, buf);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
int factoryset_read_eeprom(int i2c_addr)
|
|
{
|
|
int i, pages = 0, size = 0;
|
|
unsigned char eeprom_buf[0x3c00], hdr[4], buf[MAX_STRING_LENGTH];
|
|
unsigned char *cp, *cp1;
|
|
#if CONFIG_IS_ENABLED(DM_I2C)
|
|
struct udevice *bus, *dev;
|
|
int ret;
|
|
#endif
|
|
|
|
#if defined(CONFIG_DFU_OVER_USB)
|
|
factory_dat.usb_vendor_id = CONFIG_USB_GADGET_VENDOR_NUM;
|
|
factory_dat.usb_product_id = CONFIG_USB_GADGET_PRODUCT_NUM;
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(DM_I2C)
|
|
ret = uclass_get_device_by_seq(UCLASS_I2C, EEPROM_I2C_BUS, &bus);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = dm_i2c_probe(bus, i2c_addr, 0, &dev);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = i2c_set_chip_offset_len(dev, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = dm_i2c_read(dev, EEPROM_FATORYSET_OFFSET, hdr, sizeof(hdr));
|
|
if (ret)
|
|
goto err;
|
|
#else
|
|
if (i2c_probe(i2c_addr))
|
|
goto err;
|
|
|
|
if (i2c_read(i2c_addr, EEPROM_FATORYSET_OFFSET, 2, hdr, sizeof(hdr)))
|
|
goto err;
|
|
#endif
|
|
|
|
if ((hdr[0] != 0x99) || (hdr[1] != 0x80)) {
|
|
printf("FactorySet is not right in eeprom.\n");
|
|
return 1;
|
|
}
|
|
|
|
/* get FactorySet size */
|
|
size = (hdr[2] << 8) + hdr[3] + sizeof(hdr);
|
|
if (size > 0x3bfa)
|
|
size = 0x3bfa;
|
|
|
|
pages = size / EEPR_PG_SZ;
|
|
|
|
/*
|
|
* read the eeprom using i2c
|
|
* I can not read entire eeprom in once, so separate into several
|
|
* times. Furthermore, fetch eeprom take longer time, so we fetch
|
|
* data after every time we got a record from eeprom
|
|
*/
|
|
debug("Read eeprom page :\n");
|
|
for (i = 0; i < pages; i++) {
|
|
#if CONFIG_IS_ENABLED(DM_I2C)
|
|
ret = dm_i2c_read(dev, (OFF_PG + i) * EEPR_PG_SZ,
|
|
eeprom_buf + (i * EEPR_PG_SZ), EEPR_PG_SZ);
|
|
if (ret)
|
|
goto err;
|
|
#else
|
|
if (i2c_read(i2c_addr, (OFF_PG + i) * EEPR_PG_SZ, 2,
|
|
eeprom_buf + (i * EEPR_PG_SZ), EEPR_PG_SZ))
|
|
goto err;
|
|
#endif
|
|
}
|
|
|
|
if (size % EEPR_PG_SZ) {
|
|
#if CONFIG_IS_ENABLED(DM_I2C)
|
|
ret = dm_i2c_read(dev, (OFF_PG + pages) * EEPR_PG_SZ,
|
|
eeprom_buf + (pages * EEPR_PG_SZ),
|
|
size % EEPR_PG_SZ);
|
|
if (ret)
|
|
goto err;
|
|
#else
|
|
if (i2c_read(i2c_addr, (OFF_PG + pages) * EEPR_PG_SZ, 2,
|
|
eeprom_buf + (pages * EEPR_PG_SZ),
|
|
(size % EEPR_PG_SZ)))
|
|
goto err;
|
|
#endif
|
|
}
|
|
|
|
/* we do below just for eeprom align */
|
|
for (i = 0; i < size; i++)
|
|
if (eeprom_buf[i] == '\n')
|
|
eeprom_buf[i] = 0;
|
|
|
|
/* skip header */
|
|
size -= sizeof(hdr);
|
|
cp = (uchar *)eeprom_buf + sizeof(hdr);
|
|
|
|
/* get mac address */
|
|
get_factory_record_val(cp, size, (uchar *)"ETH1", (uchar *)"mac",
|
|
buf, MAX_STRING_LENGTH);
|
|
cp1 = buf;
|
|
for (i = 0; i < 6; i++) {
|
|
factory_dat.mac[i] = simple_strtoul((char *)cp1, NULL, 16);
|
|
cp1 += 3;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(TARGET_GIEDI) || CONFIG_IS_ENABLED(TARGET_DENEB)
|
|
/* get mac address for WLAN */
|
|
ret = get_factory_record_val(cp, size, (uchar *)"WLAN1", (uchar *)"mac",
|
|
buf, MAX_STRING_LENGTH);
|
|
if (ret > 0) {
|
|
cp1 = buf;
|
|
for (i = 0; i < 6; i++) {
|
|
factory_dat.mac_wlan[i] = simple_strtoul((char *)cp1,
|
|
NULL, 16);
|
|
cp1 += 3;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_DFU_OVER_USB)
|
|
/* read vid and pid for dfu mode */
|
|
if (0 <= get_factory_record_val(cp, size, (uchar *)"USBD1",
|
|
(uchar *)"vid", buf,
|
|
MAX_STRING_LENGTH)) {
|
|
factory_dat.usb_vendor_id = simple_strtoul((char *)buf,
|
|
NULL, 16);
|
|
}
|
|
|
|
if (0 <= get_factory_record_val(cp, size, (uchar *)"USBD1",
|
|
(uchar *)"pid", buf,
|
|
MAX_STRING_LENGTH)) {
|
|
factory_dat.usb_product_id = simple_strtoul((char *)buf,
|
|
NULL, 16);
|
|
}
|
|
printf("DFU USB: VID = 0x%4x, PID = 0x%4x\n", factory_dat.usb_vendor_id,
|
|
factory_dat.usb_product_id);
|
|
#endif
|
|
#if defined(CONFIG_VIDEO)
|
|
if (0 <= get_factory_record_val(cp, size, (uchar *)"DISP1",
|
|
(uchar *)"name", factory_dat.disp_name,
|
|
MAX_STRING_LENGTH)) {
|
|
debug("display name: %s\n", factory_dat.disp_name);
|
|
}
|
|
#endif
|
|
if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
|
|
(uchar *)"num", factory_dat.serial,
|
|
MAX_STRING_LENGTH)) {
|
|
debug("serial number: %s\n", factory_dat.serial);
|
|
}
|
|
if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
|
|
(uchar *)"ver", buf,
|
|
MAX_STRING_LENGTH)) {
|
|
factory_dat.version = simple_strtoul((char *)buf,
|
|
NULL, 16);
|
|
debug("version number: %d\n", factory_dat.version);
|
|
}
|
|
/* Get ASN from factory set if available */
|
|
if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
|
|
(uchar *)"id", factory_dat.asn,
|
|
MAX_STRING_LENGTH)) {
|
|
debug("factoryset asn: %s\n", factory_dat.asn);
|
|
} else {
|
|
factory_dat.asn[0] = 0;
|
|
}
|
|
/* Get COMP/ver from factory set if available */
|
|
if (0 <= get_factory_record_val(cp, size, (uchar *)"COMP",
|
|
(uchar *)"ver",
|
|
factory_dat.comp_version,
|
|
MAX_STRING_LENGTH)) {
|
|
debug("factoryset COMP/ver: %s\n", factory_dat.comp_version);
|
|
} else {
|
|
strcpy((char *)factory_dat.comp_version, "1.0");
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
printf("Could not read the EEPROM; something fundamentally wrong on the I2C bus.\n");
|
|
return 1;
|
|
}
|
|
|
|
static int get_mac_from_efuse(uint8_t mac[6])
|
|
{
|
|
#ifdef CONFIG_AM33XX
|
|
struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
|
|
uint32_t mac_hi, mac_lo;
|
|
|
|
mac_lo = readl(&cdev->macid0l);
|
|
mac_hi = readl(&cdev->macid0h);
|
|
|
|
mac[0] = mac_hi & 0xFF;
|
|
mac[1] = (mac_hi & 0xFF00) >> 8;
|
|
mac[2] = (mac_hi & 0xFF0000) >> 16;
|
|
mac[3] = (mac_hi & 0xFF000000) >> 24;
|
|
mac[4] = mac_lo & 0xFF;
|
|
mac[5] = (mac_lo & 0xFF00) >> 8;
|
|
#else
|
|
/* unhandled */
|
|
memset(mac, 0, 6);
|
|
#endif
|
|
if (!is_valid_ethaddr(mac)) {
|
|
puts("Warning: ethaddr not set by FactorySet or E-fuse. ");
|
|
puts("Set <ethaddr> variable to overcome this.\n");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int factoryset_mac_env_set(void)
|
|
{
|
|
uint8_t mac_addr[6];
|
|
|
|
/* Set mac from factoryset or try reading E-fuse */
|
|
debug("FactorySet: Set mac address\n");
|
|
if (is_valid_ethaddr(factory_dat.mac)) {
|
|
memcpy(mac_addr, factory_dat.mac, 6);
|
|
} else {
|
|
debug("Warning: FactorySet: <ethaddr> not set. Fallback to E-fuse\n");
|
|
if (get_mac_from_efuse(mac_addr) < 0)
|
|
return -1;
|
|
}
|
|
|
|
eth_env_set_enetaddr("ethaddr", mac_addr);
|
|
|
|
#if CONFIG_IS_ENABLED(TARGET_GIEDI) || CONFIG_IS_ENABLED(TARGET_DENEB)
|
|
eth_env_set_enetaddr("eth1addr", mac_addr);
|
|
|
|
/* wlan mac */
|
|
if (is_valid_ethaddr(factory_dat.mac_wlan))
|
|
eth_env_set_enetaddr("eth2addr", factory_dat.mac_wlan);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static void factoryset_dtb_env_set(void)
|
|
{
|
|
/* Set ASN in environment*/
|
|
if (factory_dat.asn[0] != 0) {
|
|
env_set("dtb_name", (char *)factory_dat.asn);
|
|
} else {
|
|
/* dtb suffix gets added in load script */
|
|
env_set("dtb_name", "default");
|
|
}
|
|
}
|
|
|
|
int factoryset_env_set(void)
|
|
{
|
|
int ret = 0;
|
|
|
|
factoryset_dtb_env_set();
|
|
|
|
if (factoryset_mac_env_set() < 0)
|
|
ret = -1;
|
|
|
|
return ret;
|
|
}
|
|
|
|
int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
|
|
{
|
|
put_unaligned(factory_dat.usb_vendor_id, &dev->idVendor);
|
|
put_unaligned(factory_dat.usb_product_id, &dev->idProduct);
|
|
g_dnl_set_serialnumber((char *)factory_dat.serial);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int g_dnl_get_board_bcd_device_number(int gcnum)
|
|
{
|
|
return factory_dat.version;
|
|
}
|
|
#endif /* defined(CONFIG_SPL_BUILD) */
|