brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-07-23 11:29:43 +09:00
Code Issues Projects Releases Wiki Activity
83d290c56f
u-boot-brain/drivers/phy/marvell/comphy_a3700.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

275 lines
8.8 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2015-2016 Marvell International Ltd.
*/
#ifndef _COMPHY_A3700_H_
#define _COMPHY_A3700_H_
#include "comphy.h"
#include "comphy_hpipe.h"
#define MVEBU_REG(offs) ((uintptr_t)MVEBU_REGISTER(offs))
#define DEFAULT_REFCLK_MHZ 25
#define PLL_SET_DELAY_US 600
#define PLL_LOCK_TIMEOUT 1000
#define POLL_16B_REG 1
#define POLL_32B_REG 0
/*
* COMPHY SB definitions
*/
#define COMPHY_SEL_ADDR MVEBU_REG(0x0183FC)
#define rf_compy_select(lane) (0x1 << (((lane) == 1) ? 4 : 0))
#define COMPHY_PHY_CFG1_ADDR(lane) MVEBU_REG(0x018300 + (lane) * 0x28)
#define rb_pin_pu_iveref BIT(1)
#define rb_pin_reset_core BIT(11)
#define rb_pin_reset_comphy BIT(12)
#define rb_pin_pu_pll BIT(16)
#define rb_pin_pu_rx BIT(17)
#define rb_pin_pu_tx BIT(18)
#define rb_pin_tx_idle BIT(19)
#define rf_gen_rx_sel_shift 22
#define rf_gen_rx_select (0x0F << rf_gen_rx_sel_shift)
#define rf_gen_tx_sel_shift 26
#define rf_gen_tx_select (0x0F << rf_gen_tx_sel_shift)
#define rb_phy_rx_init BIT(30)
#define COMPHY_PHY_STAT1_ADDR(lane) MVEBU_REG(0x018318 + (lane) * 0x28)
#define rb_rx_init_done BIT(0)
#define rb_pll_ready_rx BIT(2)
#define rb_pll_ready_tx BIT(3)
/*
* PCIe/USB/SGMII definitions
*/
#define PCIE_BASE MVEBU_REG(0x070000)
#define PCIETOP_BASE MVEBU_REG(0x080000)
#define PCIE_RAMBASE MVEBU_REG(0x08C000)
#define PCIEPHY_BASE MVEBU_REG(0x01F000)
#define PCIEPHY_SHFT 2
#define USB32_BASE MVEBU_REG(0x050000) /* usb3 device */
#define USB32H_BASE MVEBU_REG(0x058000) /* usb3 host */
#define USB3PHY_BASE MVEBU_REG(0x05C000)
#define USB2PHY_BASE MVEBU_REG(0x05D000)
#define USB2PHY2_BASE MVEBU_REG(0x05F000)
#define USB32_CTRL_BASE MVEBU_REG(0x05D800)
#define USB3PHY_SHFT 2
#define SGMIIPHY_BASE(l) (l == 1 ? USB3PHY_BASE : PCIEPHY_BASE)
#define SGMIIPHY_ADDR(l, a) (((a & 0x00007FF) * 2) | SGMIIPHY_BASE(l))
#define phy_read16(l, a) read16((void __iomem *)SGMIIPHY_ADDR(l, a))
#define phy_write16(l, a, data, mask) \
reg_set16((void __iomem *)SGMIIPHY_ADDR(l, a), data, mask)
/* units */
#define PCIE 1
#define USB3 2
#define PHY_BASE(unit) ((unit == PCIE) ? PCIEPHY_BASE : USB3PHY_BASE)
#define PHY_SHFT(unit) ((unit == PCIE) ? PCIEPHY_SHFT : USB3PHY_SHFT)
/* bit definition for USB32_CTRL_BASE (USB32 Control Mode) */
#define usb32_ctrl_id_mode BIT(0)
#define usb32_ctrl_soft_id BIT(1)
#define usb32_ctrl_int_mode BIT(4)
#define PHY_PWR_PLL_CTRL_ADDR 0x01 /* for phy_read16 and phy_write16 */
#define PWR_PLL_CTRL_ADDR(unit) \
(PHY_PWR_PLL_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
#define rf_phy_mode_shift 5
#define rf_phy_mode_mask (0x7 << rf_phy_mode_shift)
#define rf_ref_freq_sel_shift 0
#define rf_ref_freq_sel_mask (0x1F << rf_ref_freq_sel_shift)
#define PHY_MODE_SGMII 0x4
/* for phy_read16 and phy_write16 */
#define PHY_REG_KVCO_CAL_CTRL_ADDR 0x02
#define KVCO_CAL_CTRL_ADDR(unit) \
(PHY_REG_KVCO_CAL_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
#define rb_use_max_pll_rate BIT(12)
#define rb_force_calibration_done BIT(9)
/* for phy_read16 and phy_write16 */
#define PHY_DIG_LB_EN_ADDR 0x23
#define DIG_LB_EN_ADDR(unit) \
(PHY_DIG_LB_EN_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
#define rf_data_width_shift 10
#define rf_data_width_mask (0x3 << rf_data_width_shift)
/* for phy_read16 and phy_write16 */
#define PHY_SYNC_PATTERN_ADDR 0x24
#define SYNC_PATTERN_ADDR(unit) \
(PHY_SYNC_PATTERN_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
#define phy_txd_inv BIT(10)
#define phy_rxd_inv BIT(11)
/* for phy_read16 and phy_write16 */
#define PHY_REG_UNIT_CTRL_ADDR 0x48
#define UNIT_CTRL_ADDR(unit) \
(PHY_REG_UNIT_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
#define rb_idle_sync_en BIT(12)
/* for phy_read16 and phy_write16 */
#define PHY_REG_GEN2_SETTINGS_2 0x3e
#define GEN2_SETTING_2_ADDR(unit) \
(PHY_REG_GEN2_SETTINGS_2 * PHY_SHFT(unit) + PHY_BASE(unit))
#define g2_tx_ssc_amp BIT(14)
/* for phy_read16 and phy_write16 */
#define PHY_REG_GEN2_SETTINGS_3 0x3f
#define GEN2_SETTING_3_ADDR(unit) \
(PHY_REG_GEN2_SETTINGS_3 * PHY_SHFT(unit) + PHY_BASE(unit))
/* for phy_read16 and phy_write16 */
#define PHY_MISC_REG0_ADDR 0x4f
#define MISC_REG0_ADDR(unit) \
(PHY_MISC_REG0_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
#define rb_clk100m_125m_en BIT(4)
#define rb_clk500m_en BIT(7)
#define rb_ref_clk_sel BIT(10)
/* for phy_read16 and phy_write16 */
#define PHY_REG_IFACE_REF_CLK_CTRL_ADDR 0x51
#define UNIT_IFACE_REF_CLK_CTRL_ADDR(unit) \
(PHY_REG_IFACE_REF_CLK_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
#define rb_ref1m_gen_div_force BIT(8)
#define rf_ref1m_gen_div_value_shift 0
#define rf_ref1m_gen_div_value_mask (0xFF << rf_ref1m_gen_div_value_shift)
/* for phy_read16 and phy_write16 */
#define PHY_REG_ERR_CNT_CONST_CTRL_ADDR 0x6A
#define UNIT_ERR_CNT_CONST_CTRL_ADDR(unit) \
(PHY_REG_ERR_CNT_CONST_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
#define rb_fast_dfe_enable BIT(13)
#define MISC_REG1_ADDR(u) (0x73 * PHY_SHFT(u) + PHY_BASE(u))
#define bf_sel_bits_pcie_force BIT(15)
#define LANE_CFG0_ADDR(u) (0x180 * PHY_SHFT(u) + PHY_BASE(u))
#define bf_use_max_pll_rate BIT(9)
#define LANE_CFG1_ADDR(u) (0x181 * PHY_SHFT(u) + PHY_BASE(u))
#define bf_use_max_pll_rate BIT(9)
/* 0x5c310 = 0x93 (set BIT7) */
#define LANE_CFG4_ADDR(u) (0x188 * PHY_SHFT(u) + PHY_BASE(u))
#define bf_spread_spectrum_clock_en BIT(7)
#define LANE_STAT1_ADDR(u) (0x183 * PHY_SHFT(u) + PHY_BASE(u))
#define rb_txdclk_pclk_en BIT(0)
#define GLOB_PHY_CTRL0_ADDR(u) (0x1c1 * PHY_SHFT(u) + PHY_BASE(u))
#define bf_soft_rst BIT(0)
#define bf_mode_refdiv 0x30
#define rb_mode_core_clk_freq_sel BIT(9)
#define rb_mode_pipe_width_32 BIT(3)
#define TEST_MODE_CTRL_ADDR(u) (0x1c2 * PHY_SHFT(u) + PHY_BASE(u))
#define rb_mode_margin_override BIT(2)
#define GLOB_CLK_SRC_LO_ADDR(u) (0x1c3 * PHY_SHFT(u) + PHY_BASE(u))
#define bf_cfg_sel_20b BIT(15)
#define PWR_MGM_TIM1_ADDR(u) (0x1d0 * PHY_SHFT(u) + PHY_BASE(u))
#define PHY_REF_CLK_ADDR (0x4814 + PCIE_BASE)
#define USB3_CTRPUL_VAL_REG (0x20 + USB32_BASE)
#define USB3H_CTRPUL_VAL_REG (0x3454 + USB32H_BASE)
#define rb_usb3_ctr_100ns 0xff000000
#define USB2_OTG_PHY_CTRL_ADDR (0x820 + USB2PHY_BASE)
#define rb_usb2phy_suspm BIT(14)
#define rb_usb2phy_pu BIT(0)
#define USB2_PHY_OTG_CTRL_ADDR (0x34 + USB2PHY_BASE)
#define rb_pu_otg BIT(4)
#define USB2_PHY_CHRGR_DET_ADDR (0x38 + USB2PHY_BASE)
#define rb_cdp_en BIT(2)
#define rb_dcp_en BIT(3)
#define rb_pd_en BIT(4)
#define rb_pu_chrg_dtc BIT(5)
#define rb_cdp_dm_auto BIT(7)
#define rb_enswitch_dp BIT(12)
#define rb_enswitch_dm BIT(13)
#define USB2_CAL_CTRL_ADDR (0x8 + USB2PHY_BASE)
#define rb_usb2phy_pllcal_done BIT(31)
#define rb_usb2phy_impcal_done BIT(23)
#define USB2_PLL_CTRL0_ADDR (0x0 + USB2PHY_BASE)
#define rb_usb2phy_pll_ready BIT(31)
#define USB2_RX_CHAN_CTRL1_ADDR (0x18 + USB2PHY_BASE)
#define rb_usb2phy_sqcal_done BIT(31)
#define USB2_PHY2_CTRL_ADDR (0x804 + USB2PHY2_BASE)
#define rb_usb2phy2_suspm BIT(7)
#define rb_usb2phy2_pu BIT(0)
#define USB2_PHY2_CAL_CTRL_ADDR (0x8 + USB2PHY2_BASE)
#define USB2_PHY2_PLL_CTRL0_ADDR (0x0 + USB2PHY2_BASE)
#define USB2_PHY2_RX_CHAN_CTRL1_ADDR (0x18 + USB2PHY2_BASE)
#define USB2_PHY_BASE(usb32) (usb32 == 0 ? USB2PHY2_BASE : USB2PHY_BASE)
#define USB2_PHY_CTRL_ADDR(usb32) \
(usb32 == 0 ? USB2_PHY2_CTRL_ADDR : USB2_OTG_PHY_CTRL_ADDR)
#define RB_USB2PHY_SUSPM(usb32) \
(usb32 == 0 ? rb_usb2phy2_suspm : rb_usb2phy_suspm)
#define RB_USB2PHY_PU(usb32) \
(usb32 == 0 ? rb_usb2phy2_pu : rb_usb2phy_pu)
#define USB2_PHY_CAL_CTRL_ADDR(usb32) \
(usb32 == 0 ? USB2_PHY2_CAL_CTRL_ADDR : USB2_CAL_CTRL_ADDR)
#define USB2_PHY_RX_CHAN_CTRL1_ADDR(usb32) \
(usb32 == 0 ? USB2_PHY2_RX_CHAN_CTRL1_ADDR : USB2_RX_CHAN_CTRL1_ADDR)
#define USB2_PHY_PLL_CTRL0_ADDR(usb32) \
(usb32 == 0 ? USB2_PHY2_PLL_CTRL0_ADDR : USB2_PLL_CTRL0_ADDR)
/*
* SATA definitions
*/
#define AHCI_BASE MVEBU_REG(0xE0000)
#define rh_vsreg_addr (AHCI_BASE + 0x178)
#define rh_vsreg_data (AHCI_BASE + 0x17C)
#define rh_vs0_a (AHCI_BASE + 0xA0)
#define rh_vs0_d (AHCI_BASE + 0xA4)
#define vphy_sync_pattern_reg 0x224
#define bs_txd_inv BIT(10)
#define bs_rxd_inv BIT(11)
#define vphy_loopback_reg0 0x223
#define bs_phyintf_40bit 0x0C00
#define bs_pll_ready_tx 0x10
#define vphy_power_reg0 0x201
#define vphy_calctl_reg 0x202
#define bs_max_pll_rate BIT(12)
#define vphy_reserve_reg 0x0e
#define bs_phyctrl_frm_pin BIT(13)
#define vsata_ctrl_reg 0x00
#define bs_phy_pu_pll BIT(6)
/*
* SDIO/eMMC definitions
*/
#define SDIO_BASE MVEBU_REG(0xD8000)
#define SDIO_HOST_CTRL1_ADDR (SDIO_BASE + 0x28)
#define SDIO_SDHC_FIFO_ADDR (SDIO_BASE + 0x12C)
#define SDIO_CAP_12_ADDR (SDIO_BASE + 0x40)
#define SDIO_ENDIAN_ADDR (SDIO_BASE + 0x1A4)
#define SDIO_PHY_TIMING_ADDR (SDIO_BASE + 0x170)
#define SDIO_PHY_PAD_CTRL0_ADDR (SDIO_BASE + 0x178)
#define SDIO_DLL_RST_ADDR (SDIO_BASE + 0x148)
#endif /* _COMPHY_A3700_H_ */
Reference in New Issue View Git Blame Copy Permalink