mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-23 19:39:44 +09:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
133 lines
3.1 KiB
C
133 lines
3.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* board/renesas/draak/draak.c
|
|
* This file is Draak board support.
|
|
*
|
|
* Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@gmail.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <netdev.h>
|
|
#include <dm.h>
|
|
#include <dm/platform_data/serial_sh.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/io.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/rmobile.h>
|
|
#include <asm/arch/rcar-mstp.h>
|
|
#include <asm/arch/sh_sdhi.h>
|
|
#include <i2c.h>
|
|
#include <mmc.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define CPGWPCR 0xE6150904
|
|
#define CPGWPR 0xE615090C
|
|
|
|
#define CLK2MHZ(clk) (clk / 1000 / 1000)
|
|
void s_init(void)
|
|
{
|
|
struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE;
|
|
struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE;
|
|
|
|
/* Watchdog init */
|
|
writel(0xA5A5A500, &rwdt->rwtcsra);
|
|
writel(0xA5A5A500, &swdt->swtcsra);
|
|
|
|
writel(0xA5A50000, CPGWPCR);
|
|
writel(0xFFFFFFFF, CPGWPR);
|
|
}
|
|
|
|
#define GSX_MSTP112 BIT(12) /* 3DG */
|
|
#define TMU0_MSTP125 BIT(25) /* secure */
|
|
#define TMU1_MSTP124 BIT(24) /* non-secure */
|
|
#define SCIF2_MSTP310 BIT(10) /* SCIF2 */
|
|
#define DVFS_MSTP926 BIT(26)
|
|
#define HSUSB_MSTP704 BIT(4) /* HSUSB */
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
/* TMU0,1 */ /* which use ? */
|
|
mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125 | TMU1_MSTP124);
|
|
|
|
#if defined(CONFIG_SYS_I2C) && defined(CONFIG_SYS_I2C_SH)
|
|
/* DVFS for reset */
|
|
mstp_clrbits_le32(MSTPSR9, SMSTPCR9, DVFS_MSTP926);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/* SYSC */
|
|
/* R/- 32 Power status register 2(3DG) */
|
|
#define SYSC_PWRSR2 0xE6180100
|
|
/* -/W 32 Power resume control register 2 (3DG) */
|
|
#define SYSC_PWRONCR2 0xE618010C
|
|
|
|
/* HSUSB block registers */
|
|
#define HSUSB_REG_LPSTS 0xE6590102
|
|
#define HSUSB_REG_LPSTS_SUSPM_NORMAL BIT(14)
|
|
#define HSUSB_REG_UGCTRL2 0xE6590184
|
|
#define HSUSB_REG_UGCTRL2_USB0SEL 0x30
|
|
#define HSUSB_REG_UGCTRL2_USB0SEL_EHCI 0x10
|
|
|
|
int board_init(void)
|
|
{
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000;
|
|
|
|
/* USB1 pull-up */
|
|
setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN);
|
|
|
|
/* Configure the HSUSB block */
|
|
mstp_clrbits_le32(MSTPSR7, SMSTPCR7, HSUSB_MSTP704);
|
|
/* Choice USB0SEL */
|
|
clrsetbits_le32(HSUSB_REG_UGCTRL2, HSUSB_REG_UGCTRL2_USB0SEL,
|
|
HSUSB_REG_UGCTRL2_USB0SEL_EHCI);
|
|
/* low power status */
|
|
setbits_le16(HSUSB_REG_LPSTS, HSUSB_REG_LPSTS_SUSPM_NORMAL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
if (fdtdec_setup_memory_size() != 0)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init_banksize(void)
|
|
{
|
|
fdtdec_setup_memory_banksize();
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define RST_BASE 0xE6160000
|
|
#define RST_CA57RESCNT (RST_BASE + 0x40)
|
|
#define RST_CA53RESCNT (RST_BASE + 0x44)
|
|
#define RST_RSTOUTCR (RST_BASE + 0x58)
|
|
#define RST_CA57_CODE 0xA5A5000F
|
|
#define RST_CA53_CODE 0x5A5A000F
|
|
|
|
void reset_cpu(ulong addr)
|
|
{
|
|
unsigned long midr, cputype;
|
|
|
|
asm volatile("mrs %0, midr_el1" : "=r" (midr));
|
|
cputype = (midr >> 4) & 0xfff;
|
|
|
|
if (cputype == 0xd03)
|
|
writel(RST_CA53_CODE, RST_CA53RESCNT);
|
|
else if (cputype == 0xd07)
|
|
writel(RST_CA57_CODE, RST_CA57RESCNT);
|
|
else
|
|
hang();
|
|
}
|