mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-28 13:53:44 +09:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
381 lines
8.2 KiB
Plaintext
381 lines
8.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018 Intel Corporation
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/reset/altr,rst-mgr-s10.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
compatible = "altr,socfpga-stratix10";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
compatible = "arm,cortex-a53", "arm,armv8";
|
|
device_type = "cpu";
|
|
enable-method = "psci";
|
|
reg = <0x0>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
compatible = "arm,cortex-a53", "arm,armv8";
|
|
device_type = "cpu";
|
|
enable-method = "psci";
|
|
reg = <0x1>;
|
|
};
|
|
|
|
cpu2: cpu@2 {
|
|
compatible = "arm,cortex-a53", "arm,armv8";
|
|
device_type = "cpu";
|
|
enable-method = "psci";
|
|
reg = <0x2>;
|
|
};
|
|
|
|
cpu3: cpu@3 {
|
|
compatible = "arm,cortex-a53", "arm,armv8";
|
|
device_type = "cpu";
|
|
enable-method = "psci";
|
|
reg = <0x3>;
|
|
};
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,armv8-pmuv3";
|
|
interrupts = <0 120 8>,
|
|
<0 121 8>,
|
|
<0 122 8>,
|
|
<0 123 8>;
|
|
interrupt-affinity = <&cpu0>,
|
|
<&cpu1>,
|
|
<&cpu2>,
|
|
<&cpu3>;
|
|
interrupt-parent = <&intc>;
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-0.2";
|
|
method = "smc";
|
|
};
|
|
|
|
intc: intc@fffc1000 {
|
|
compatible = "arm,gic-400", "arm,cortex-a15-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x0 0xfffc1000 0x0 0x1000>,
|
|
<0x0 0xfffc2000 0x0 0x2000>,
|
|
<0x0 0xfffc4000 0x0 0x2000>,
|
|
<0x0 0xfffc6000 0x0 0x2000>;
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
device_type = "soc";
|
|
interrupt-parent = <&intc>;
|
|
ranges = <0 0 0 0xffffffff>;
|
|
|
|
clkmgr@ffd1000 {
|
|
compatible = "altr,clk-mgr";
|
|
reg = <0xffd10000 0x1000>;
|
|
};
|
|
|
|
gmac0: ethernet@ff800000 {
|
|
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
|
|
reg = <0xff800000 0x2000>;
|
|
interrupts = <0 90 4>;
|
|
interrupt-names = "macirq";
|
|
mac-address = [00 00 00 00 00 00];
|
|
resets = <&rst EMAC0_RESET>;
|
|
reset-names = "stmmaceth";
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac1: ethernet@ff802000 {
|
|
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
|
|
reg = <0xff802000 0x2000>;
|
|
interrupts = <0 91 4>;
|
|
interrupt-names = "macirq";
|
|
mac-address = [00 00 00 00 00 00];
|
|
resets = <&rst EMAC1_RESET>;
|
|
reset-names = "stmmaceth";
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac2: ethernet@ff804000 {
|
|
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
|
|
reg = <0xff804000 0x2000>;
|
|
interrupts = <0 92 4>;
|
|
interrupt-names = "macirq";
|
|
mac-address = [00 00 00 00 00 00];
|
|
resets = <&rst EMAC2_RESET>;
|
|
reset-names = "stmmaceth";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio0: gpio@ffc03200 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0xffc03200 0x100>;
|
|
resets = <&rst GPIO0_RESET>;
|
|
status = "disabled";
|
|
|
|
porta: gpio-controller@0 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <24>;
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0 110 4>;
|
|
};
|
|
};
|
|
|
|
gpio1: gpio@ffc03300 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0xffc03300 0x100>;
|
|
resets = <&rst GPIO1_RESET>;
|
|
status = "disabled";
|
|
|
|
portb: gpio-controller@0 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <24>;
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0 111 4>;
|
|
};
|
|
};
|
|
|
|
i2c0: i2c@ffc02800 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0xffc02800 0x100>;
|
|
interrupts = <0 103 4>;
|
|
resets = <&rst I2C0_RESET>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@ffc02900 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0xffc02900 0x100>;
|
|
interrupts = <0 104 4>;
|
|
resets = <&rst I2C1_RESET>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@ffc02a00 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0xffc02a00 0x100>;
|
|
interrupts = <0 105 4>;
|
|
resets = <&rst I2C2_RESET>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@ffc02b00 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0xffc02b00 0x100>;
|
|
interrupts = <0 106 4>;
|
|
resets = <&rst I2C3_RESET>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@ffc02c00 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0xffc02c00 0x100>;
|
|
interrupts = <0 107 4>;
|
|
resets = <&rst I2C4_RESET>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc: dwmmc0@ff808000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "altr,socfpga-dw-mshc";
|
|
reg = <0xff808000 0x1000>;
|
|
interrupts = <0 96 4>;
|
|
fifo-depth = <0x400>;
|
|
resets = <&rst SDMMC_RESET>;
|
|
reset-names = "reset";
|
|
status = "disabled";
|
|
};
|
|
|
|
ocram: sram@ffe00000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0xffe00000 0x100000>;
|
|
};
|
|
|
|
rst: rstmgr@ffd11000 {
|
|
#reset-cells = <1>;
|
|
compatible = "altr,rst-mgr";
|
|
reg = <0xffd11000 0x1000>;
|
|
altr,modrst-offset = <0x20>;
|
|
};
|
|
|
|
spi0: spi@ffda4000 {
|
|
compatible = "snps,dw-apb-ssi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0xffda4000 0x1000>;
|
|
interrupts = <0 99 4>;
|
|
resets = <&rst SPIM0_RESET>;
|
|
reg-io-width = <4>;
|
|
num-chipselect = <4>;
|
|
bus-num = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@ffda5000 {
|
|
compatible = "snps,dw-apb-ssi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0xffda5000 0x1000>;
|
|
interrupts = <0 100 4>;
|
|
resets = <&rst SPIM1_RESET>;
|
|
reg-io-width = <4>;
|
|
num-chipselect = <4>;
|
|
bus-num = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sysmgr: sysmgr@ffd12000 {
|
|
compatible = "altr,sys-mgr", "syscon";
|
|
reg = <0xffd12000 0x1000>;
|
|
};
|
|
|
|
/* Local timer */
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <1 13 0xf08>,
|
|
<1 14 0xf08>,
|
|
<1 11 0xf08>,
|
|
<1 10 0xf08>;
|
|
};
|
|
|
|
timer0: timer0@ffc03000 {
|
|
compatible = "snps,dw-apb-timer";
|
|
interrupts = <0 113 4>;
|
|
reg = <0xffc03000 0x100>;
|
|
};
|
|
|
|
timer1: timer1@ffc03100 {
|
|
compatible = "snps,dw-apb-timer";
|
|
interrupts = <0 114 4>;
|
|
reg = <0xffc03100 0x100>;
|
|
};
|
|
|
|
timer2: timer2@ffd00000 {
|
|
compatible = "snps,dw-apb-timer";
|
|
interrupts = <0 115 4>;
|
|
reg = <0xffd00000 0x100>;
|
|
};
|
|
|
|
timer3: timer3@ffd00100 {
|
|
compatible = "snps,dw-apb-timer";
|
|
interrupts = <0 116 4>;
|
|
reg = <0xffd00100 0x100>;
|
|
};
|
|
|
|
uart0: serial0@ffc02000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0xffc02000 0x100>;
|
|
interrupts = <0 108 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
resets = <&rst UART0_RESET>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial1@ffc02100 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0xffc02100 0x100>;
|
|
interrupts = <0 109 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
resets = <&rst UART1_RESET>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbphy0: usbphy@0 {
|
|
#phy-cells = <0>;
|
|
compatible = "usb-nop-xceiv";
|
|
status = "okay";
|
|
};
|
|
|
|
usb0: usb@ffb00000 {
|
|
compatible = "snps,dwc2";
|
|
reg = <0xffb00000 0x40000>;
|
|
interrupts = <0 93 4>;
|
|
phys = <&usbphy0>;
|
|
phy-names = "usb2-phy";
|
|
resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
|
|
reset-names = "dwc2", "dwc2-ecc";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb1: usb@ffb40000 {
|
|
compatible = "snps,dwc2";
|
|
reg = <0xffb40000 0x40000>;
|
|
interrupts = <0 94 4>;
|
|
phys = <&usbphy0>;
|
|
phy-names = "usb2-phy";
|
|
resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
|
|
reset-names = "dwc2", "dwc2-ecc";
|
|
status = "disabled";
|
|
};
|
|
|
|
watchdog0: watchdog@ffd00200 {
|
|
compatible = "snps,dw-wdt";
|
|
reg = <0xffd00200 0x100>;
|
|
interrupts = <0 117 4>;
|
|
resets = <&rst WATCHDOG0_RESET>;
|
|
status = "disabled";
|
|
};
|
|
|
|
watchdog1: watchdog@ffd00300 {
|
|
compatible = "snps,dw-wdt";
|
|
reg = <0xffd00300 0x100>;
|
|
interrupts = <0 118 4>;
|
|
resets = <&rst WATCHDOG1_RESET>;
|
|
status = "disabled";
|
|
};
|
|
|
|
watchdog2: watchdog@ffd00400 {
|
|
compatible = "snps,dw-wdt";
|
|
reg = <0xffd00400 0x100>;
|
|
interrupts = <0 125 4>;
|
|
resets = <&rst WATCHDOG2_RESET>;
|
|
status = "disabled";
|
|
};
|
|
|
|
watchdog3: watchdog@ffd00500 {
|
|
compatible = "snps,dw-wdt";
|
|
reg = <0xffd00500 0x100>;
|
|
interrupts = <0 126 4>;
|
|
resets = <&rst WATCHDOG3_RESET>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|