mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 00:18:51 +09:00
![Stefan Roese](/assets/img/avatar_default.png)
The BCSR status bit for the 66MHz PCI operation was correctly addressed (MSB/LSB problem). Now the correct currently setup PCI frequency is displayed upon bootup. This patch also fixes this problem on Rainier & Yellowstone, since these boards use the same souce code as Sequoia & Yosemite do. Signed-off-by: Stefan Roese <sr@denx.de>
557 lines
18 KiB
C
557 lines
18 KiB
C
/*
|
|
* (C) Copyright 2006-2007
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ppc4xx.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <spd_sdram.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
register uint reg;
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup the external bus controller/chip selects
|
|
*-------------------------------------------------------------------*/
|
|
mtdcr(ebccfga, xbcfg);
|
|
reg = mfdcr(ebccfgd);
|
|
mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup the GPIO pins
|
|
*-------------------------------------------------------------------*/
|
|
/*CPLD cs */
|
|
/*setup Address lines for flash size 64Meg. */
|
|
out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x50010000);
|
|
out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x50010000);
|
|
out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x50000000);
|
|
|
|
/*setup emac */
|
|
out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
|
|
out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
|
|
out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
|
|
out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
|
|
out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
|
|
|
|
/*UART1 */
|
|
out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000);
|
|
out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000);
|
|
out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000);
|
|
|
|
/* external interrupts IRQ0...3 */
|
|
out32(GPIO1_TCR, in32(GPIO1_TCR) & ~0x00f00000);
|
|
out32(GPIO1_TSRL, in32(GPIO1_TSRL) & ~0x0000ff00);
|
|
out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00005500);
|
|
|
|
#ifdef CONFIG_440EP
|
|
/*setup USB 2.0 */
|
|
out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000);
|
|
out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000);
|
|
out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf);
|
|
out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa);
|
|
out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
|
|
#endif
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup the interrupt controller polarities, triggers, etc.
|
|
*-------------------------------------------------------------------*/
|
|
mtdcr(uic0sr, 0xffffffff); /* clear all */
|
|
mtdcr(uic0er, 0x00000000); /* disable all */
|
|
mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */
|
|
mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
|
|
mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
|
|
mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr(uic0sr, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(uic1sr, 0xffffffff); /* clear all */
|
|
mtdcr(uic1er, 0x00000000); /* disable all */
|
|
mtdcr(uic1cr, 0x00000000); /* all non-critical */
|
|
mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
|
|
mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
|
|
mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr(uic1sr, 0xffffffff); /* clear all */
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup other serial configuration
|
|
*-------------------------------------------------------------------*/
|
|
mfsdr(sdr_pci0, reg);
|
|
mtsdr(sdr_pci0, 0x80000000 | reg); /* PCI arbiter enabled */
|
|
mtsdr(sdr_pfc0, 0x00003e00); /* Pin function */
|
|
mtsdr(sdr_pfc1, 0x00048000); /* Pin function: UART0 has 4 pins */
|
|
|
|
/*clear tmrclk divisor */
|
|
*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
|
|
|
|
/*enable ethernet */
|
|
*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
|
|
|
|
#ifdef CONFIG_440EP
|
|
/*enable usb 1.1 fs device and remove usb 2.0 reset */
|
|
*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
|
|
#endif
|
|
|
|
/*get rid of flash write protect */
|
|
*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r (void)
|
|
{
|
|
uint pbcr;
|
|
int size_val = 0;
|
|
|
|
/* Re-do sizing to get full correct info */
|
|
mtdcr(ebccfga, pb0cr);
|
|
pbcr = mfdcr(ebccfgd);
|
|
switch (gd->bd->bi_flashsize) {
|
|
case 1 << 20:
|
|
size_val = 0;
|
|
break;
|
|
case 2 << 20:
|
|
size_val = 1;
|
|
break;
|
|
case 4 << 20:
|
|
size_val = 2;
|
|
break;
|
|
case 8 << 20:
|
|
size_val = 3;
|
|
break;
|
|
case 16 << 20:
|
|
size_val = 4;
|
|
break;
|
|
case 32 << 20:
|
|
size_val = 5;
|
|
break;
|
|
case 64 << 20:
|
|
size_val = 6;
|
|
break;
|
|
case 128 << 20:
|
|
size_val = 7;
|
|
break;
|
|
}
|
|
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
|
|
mtdcr(ebccfga, pb0cr);
|
|
mtdcr(ebccfgd, pbcr);
|
|
|
|
/* adjust flash start and offset */
|
|
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
|
|
gd->bd->bi_flashoffset = 0;
|
|
|
|
/* Monitor protection ON by default */
|
|
(void)flash_protect(FLAG_PROTECT_SET,
|
|
-CFG_MONITOR_LEN,
|
|
0xffffffff,
|
|
&flash_info[0]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
char *s = getenv("serial#");
|
|
u8 rev;
|
|
u8 val;
|
|
|
|
#ifdef CONFIG_440EP
|
|
printf("Board: Yosemite - AMCC PPC440EP Evaluation Board");
|
|
#else
|
|
printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board");
|
|
#endif
|
|
|
|
rev = in_8((void *)(CFG_BCSR_BASE + 0));
|
|
val = in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN;
|
|
printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
|
|
|
|
if (s != NULL) {
|
|
puts(", serial# ");
|
|
puts(s);
|
|
}
|
|
putc('\n');
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*************************************************************************
|
|
* sdram_init -- doesn't use serial presence detect.
|
|
*
|
|
* Assumes: 256 MB, ECC, non-registered
|
|
* PLB @ 133 MHz
|
|
*
|
|
************************************************************************/
|
|
#define NUM_TRIES 64
|
|
#define NUM_READS 10
|
|
|
|
void sdram_tr1_set(int ram_address, int* tr1_value)
|
|
{
|
|
int i;
|
|
int j, k;
|
|
volatile unsigned int* ram_pointer = (unsigned int*)ram_address;
|
|
int first_good = -1, last_bad = 0x1ff;
|
|
|
|
unsigned long test[NUM_TRIES] = {
|
|
0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
|
|
0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
|
|
0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
|
|
0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
|
|
0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
|
|
0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
|
|
0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
|
|
0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
|
|
0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
|
|
0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
|
|
0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
|
|
0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
|
|
0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
|
|
0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
|
|
0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
|
|
0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
|
|
|
|
/* go through all possible SDRAM0_TR1[RDCT] values */
|
|
for (i=0; i<=0x1ff; i++) {
|
|
/* set the current value for TR1 */
|
|
mtsdram(mem_tr1, (0x80800800 | i));
|
|
|
|
/* write values */
|
|
for (j=0; j<NUM_TRIES; j++) {
|
|
ram_pointer[j] = test[j];
|
|
|
|
/* clear any cache at ram location */
|
|
__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
|
|
}
|
|
|
|
/* read values back */
|
|
for (j=0; j<NUM_TRIES; j++) {
|
|
for (k=0; k<NUM_READS; k++) {
|
|
/* clear any cache at ram location */
|
|
__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
|
|
|
|
if (ram_pointer[j] != test[j])
|
|
break;
|
|
}
|
|
|
|
/* read error */
|
|
if (k != NUM_READS) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* we have a SDRAM0_TR1[RDCT] that is part of the window */
|
|
if (j == NUM_TRIES) {
|
|
if (first_good == -1)
|
|
first_good = i; /* found beginning of window */
|
|
} else { /* bad read */
|
|
/* if we have not had a good read then don't care */
|
|
if(first_good != -1) {
|
|
/* first failure after a good read */
|
|
last_bad = i-1;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* return the current value for TR1 */
|
|
*tr1_value = (first_good + last_bad) / 2;
|
|
}
|
|
|
|
void sdram_init(void)
|
|
{
|
|
register uint reg;
|
|
int tr1_bank1, tr1_bank2;
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup some default
|
|
*------------------------------------------------------------------*/
|
|
mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
|
|
mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
|
|
mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
|
|
mtsdram(mem_clktr, 0x40000000); /* ?? */
|
|
mtsdram(mem_wddctr, 0x40000000); /* ?? */
|
|
|
|
/*clear this first, if the DDR is enabled by a debugger
|
|
then you can not make changes. */
|
|
mtsdram(mem_cfg0, 0x00000000); /* Disable EEC */
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup for board-specific specific mem
|
|
*------------------------------------------------------------------*/
|
|
/*
|
|
* Following for CAS Latency = 2.5 @ 133 MHz PLB
|
|
*/
|
|
mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
|
|
mtsdram(mem_b1cr, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */
|
|
|
|
mtsdram(mem_tr0, 0x410a4012); /* ?? */
|
|
mtsdram(mem_rtr, 0x04080000); /* ?? */
|
|
mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
|
|
mtsdram(mem_cfg0, 0x30000000); /* Disable EEC */
|
|
udelay(400); /* Delay 200 usecs (min) */
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Enable the controller, then wait for DCEN to complete
|
|
*------------------------------------------------------------------*/
|
|
mtsdram(mem_cfg0, 0x80000000); /* Enable */
|
|
|
|
for (;;) {
|
|
mfsdram(mem_mcsts, reg);
|
|
if (reg & 0x80000000)
|
|
break;
|
|
}
|
|
|
|
sdram_tr1_set(0x00000000, &tr1_bank1);
|
|
sdram_tr1_set(0x08000000, &tr1_bank2);
|
|
mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800) );
|
|
}
|
|
|
|
/*************************************************************************
|
|
* long int initdram
|
|
*
|
|
************************************************************************/
|
|
long int initdram(int board)
|
|
{
|
|
sdram_init();
|
|
return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024); /* return bytes */
|
|
}
|
|
|
|
#if defined(CFG_DRAM_TEST)
|
|
int testdram(void)
|
|
{
|
|
unsigned long *mem = (unsigned long *)0;
|
|
const unsigned long kend = (1024 / sizeof(unsigned long));
|
|
unsigned long k, n;
|
|
|
|
mtmsr(0);
|
|
|
|
for (k = 0; k < CFG_KBYTES_SDRAM;
|
|
++k, mem += (1024 / sizeof(unsigned long))) {
|
|
if ((k & 1023) == 0) {
|
|
printf("%3d MB\r", k / 1024);
|
|
}
|
|
|
|
memset(mem, 0xaaaaaaaa, 1024);
|
|
for (n = 0; n < kend; ++n) {
|
|
if (mem[n] != 0xaaaaaaaa) {
|
|
printf("SDRAM test fails at: %08x\n",
|
|
(uint) & mem[n]);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
memset(mem, 0x55555555, 1024);
|
|
for (n = 0; n < kend; ++n) {
|
|
if (mem[n] != 0x55555555) {
|
|
printf("SDRAM test fails at: %08x\n",
|
|
(uint) & mem[n]);
|
|
return 1;
|
|
}
|
|
}
|
|
}
|
|
printf("SDRAM test passes\n");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/*************************************************************************
|
|
* pci_pre_init
|
|
*
|
|
* This routine is called just prior to registering the hose and gives
|
|
* the board the opportunity to check things. Returning a value of zero
|
|
* indicates that things are bad & PCI initialization should be aborted.
|
|
*
|
|
* Different boards may wish to customize the pci controller structure
|
|
* (add regions, override default access routines, etc) or perform
|
|
* certain pre-initialization actions.
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI)
|
|
int pci_pre_init(struct pci_controller *hose)
|
|
{
|
|
unsigned long addr;
|
|
|
|
/*-------------------------------------------------------------------------+
|
|
| Set priority for all PLB3 devices to 0.
|
|
| Set PLB3 arbiter to fair mode.
|
|
+-------------------------------------------------------------------------*/
|
|
mfsdr(sdr_amp1, addr);
|
|
mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
|
|
addr = mfdcr(plb3_acr);
|
|
mtdcr(plb3_acr, addr | 0x80000000);
|
|
|
|
/*-------------------------------------------------------------------------+
|
|
| Set priority for all PLB4 devices to 0.
|
|
+-------------------------------------------------------------------------*/
|
|
mfsdr(sdr_amp0, addr);
|
|
mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
|
|
addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
|
|
mtdcr(plb4_acr, addr);
|
|
|
|
/*-------------------------------------------------------------------------+
|
|
| Set Nebula PLB4 arbiter to fair mode.
|
|
+-------------------------------------------------------------------------*/
|
|
/* Segment0 */
|
|
addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
|
|
addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
|
|
addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
|
|
addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
|
|
mtdcr(plb0_acr, addr);
|
|
|
|
/* Segment1 */
|
|
addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
|
|
addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
|
|
addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
|
|
addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
|
|
mtdcr(plb1_acr, addr);
|
|
|
|
return 1;
|
|
}
|
|
#endif /* defined(CONFIG_PCI) */
|
|
|
|
/*************************************************************************
|
|
* pci_target_init
|
|
*
|
|
* The bootstrap configuration provides default settings for the pci
|
|
* inbound map (PIM). But the bootstrap config choices are limited and
|
|
* may not be sufficient for a given board.
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
|
|
void pci_target_init(struct pci_controller *hose)
|
|
{
|
|
/*--------------------------------------------------------------------------+
|
|
* Set up Direct MMIO registers
|
|
*--------------------------------------------------------------------------*/
|
|
/*--------------------------------------------------------------------------+
|
|
| PowerPC440 EP PCI Master configuration.
|
|
| Map one 1Gig range of PLB/processor addresses to PCI memory space.
|
|
| PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
|
|
| Use byte reversed out routines to handle endianess.
|
|
| Make this region non-prefetchable.
|
|
+--------------------------------------------------------------------------*/
|
|
out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
|
|
out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
|
|
out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
|
|
out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
|
|
out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
|
|
|
|
out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
|
|
out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
|
|
out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
|
|
out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
|
|
out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
|
|
|
|
out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
|
|
out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
|
|
out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
|
|
out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
|
|
|
|
/*--------------------------------------------------------------------------+
|
|
* Set up Configuration registers
|
|
*--------------------------------------------------------------------------*/
|
|
|
|
/* Program the board's subsystem id/vendor id */
|
|
pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
|
|
CFG_PCI_SUBSYS_VENDORID);
|
|
pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
|
|
|
|
/* Configure command register as bus master */
|
|
pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
|
|
|
|
/* 240nS PCI clock */
|
|
pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
|
|
|
|
/* No error reporting */
|
|
pci_write_config_word(0, PCI_ERREN, 0);
|
|
|
|
pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
|
|
|
|
}
|
|
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
|
|
|
|
/*************************************************************************
|
|
* pci_master_init
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
|
|
void pci_master_init(struct pci_controller *hose)
|
|
{
|
|
unsigned short temp_short;
|
|
|
|
/*--------------------------------------------------------------------------+
|
|
| Write the PowerPC440 EP PCI Configuration regs.
|
|
| Enable PowerPC440 EP to be a master on the PCI bus (PMM).
|
|
| Enable PowerPC440 EP to act as a PCI memory target (PTM).
|
|
+--------------------------------------------------------------------------*/
|
|
pci_read_config_word(0, PCI_COMMAND, &temp_short);
|
|
pci_write_config_word(0, PCI_COMMAND,
|
|
temp_short | PCI_COMMAND_MASTER |
|
|
PCI_COMMAND_MEMORY);
|
|
}
|
|
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
|
|
|
|
/*************************************************************************
|
|
* is_pci_host
|
|
*
|
|
* This routine is called to determine if a pci scan should be
|
|
* performed. With various hardware environments (especially cPCI and
|
|
* PPMC) it's insufficient to depend on the state of the arbiter enable
|
|
* bit in the strap register, or generic host/adapter assumptions.
|
|
*
|
|
* Rather than hard-code a bad assumption in the general 440 code, the
|
|
* 440 pci code requires the board to decide at runtime.
|
|
*
|
|
* Return 0 for adapter mode, non-zero for host (monarch) mode.
|
|
*
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI)
|
|
int is_pci_host(struct pci_controller *hose)
|
|
{
|
|
/* Bamboo is always configured as host. */
|
|
return (1);
|
|
}
|
|
#endif /* defined(CONFIG_PCI) */
|
|
|
|
/*************************************************************************
|
|
* hw_watchdog_reset
|
|
*
|
|
* This routine is called to reset (keep alive) the watchdog timer
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_HW_WATCHDOG)
|
|
void hw_watchdog_reset(void)
|
|
{
|
|
|
|
}
|
|
#endif
|
|
|
|
void board_reset(void)
|
|
{
|
|
/* give reset to BCSR */
|
|
*(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09;
|
|
}
|