u-boot-brain/include/log.h
Simon Glass 4ce5b8104a log: Fix up debug_cond() when LOG is enabled
At present debug() statements can cause debuf output to appear when LOG is
enabled but DEBUG is not. This is not intended and it seems that the
condition is wrong.

Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-04-06 16:33:19 +12:00

667 lines
20 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Logging support
*
* Copyright (c) 2017 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
*/
#ifndef __LOG_H
#define __LOG_H
#include <stdio.h>
#include <linker_lists.h>
#include <dm/uclass-id.h>
#include <linux/bitops.h>
#include <linux/list.h>
struct cmd_tbl;
/**
* enum log_level_t - Log levels supported, ranging from most to least important
*/
enum log_level_t {
/** @LOGL_EMERG: U-Boot is unstable */
LOGL_EMERG = 0,
/** @LOGL_ALERT: Action must be taken immediately */
LOGL_ALERT,
/** @LOGL_CRIT: Critical conditions */
LOGL_CRIT,
/** @LOGL_ERR: Error that prevents something from working */
LOGL_ERR,
/** @LOGL_WARNING: Warning may prevent optimal operation */
LOGL_WARNING,
/** @LOGL_NOTICE: Normal but significant condition, printf() */
LOGL_NOTICE,
/** @LOGL_INFO: General information message */
LOGL_INFO,
/** @LOGL_DEBUG: Basic debug-level message */
LOGL_DEBUG,
/** @LOGL_DEBUG_CONTENT: Debug message showing full message content */
LOGL_DEBUG_CONTENT,
/** @LOGL_DEBUG_IO: Debug message showing hardware I/O access */
LOGL_DEBUG_IO,
/** @LOGL_COUNT: Total number of valid log levels */
LOGL_COUNT,
/** @LOGL_NONE: Used to indicate that there is no valid log level */
LOGL_NONE,
/** @LOGL_LEVEL_MASK: Mask for valid log levels */
LOGL_LEVEL_MASK = 0xf,
/** @LOGL_FORCE_DEBUG: Mask to force output due to LOG_DEBUG */
LOGL_FORCE_DEBUG = 0x10,
/** @LOGL_FIRST: The first, most-important log level */
LOGL_FIRST = LOGL_EMERG,
/** @LOGL_MAX: The last, least-important log level */
LOGL_MAX = LOGL_DEBUG_IO,
/** @LOGL_CONT: Use same log level as in previous call */
LOGL_CONT = -1,
};
/**
* enum log_category_t - Log categories supported.
*
* Log categories between %LOGC_FIRST and %LOGC_NONE correspond to uclasses
* (i.e. &enum uclass_id), but there are also some more generic categories.
*
* Remember to update log_cat_name[] after adding a new category.
*/
enum log_category_t {
/** @LOGC_FIRST: First log category */
LOGC_FIRST = 0, /* First part mirrors UCLASS_... */
/** @LOGC_NONE: Default log category */
LOGC_NONE = UCLASS_COUNT, /* First number is after all uclasses */
/** @LOGC_ARCH: Related to arch-specific code */
LOGC_ARCH,
/** @LOGC_BOARD: Related to board-specific code */
LOGC_BOARD,
/** @LOGC_CORE: Related to core features (non-driver-model) */
LOGC_CORE,
/** @LOGC_DM: Core driver-model */
LOGC_DM,
/** @LOGC_DT: Device-tree */
LOGC_DT,
/** @LOGC_EFI: EFI implementation */
LOGC_EFI,
/** @LOGC_ALLOC: Memory allocation */
LOGC_ALLOC,
/** @LOGC_SANDBOX: Related to the sandbox board */
LOGC_SANDBOX,
/** @LOGC_BLOBLIST: Bloblist */
LOGC_BLOBLIST,
/** @LOGC_DEVRES: Device resources (``devres_...`` functions) */
LOGC_DEVRES,
/** @LOGC_ACPI: Advanced Configuration and Power Interface (ACPI) */
LOGC_ACPI,
/** @LOGC_BOOT: Related to boot process / boot image processing */
LOGC_BOOT,
/** @LOGC_COUNT: Number of log categories */
LOGC_COUNT,
/** @LOGC_END: Sentinel value for lists of log categories */
LOGC_END,
/** @LOGC_CONT: Use same category as in previous call */
LOGC_CONT = -1,
};
/* Helper to cast a uclass ID to a log category */
static inline int log_uc_cat(enum uclass_id id)
{
return (enum log_category_t)id;
}
/**
* _log() - Internal function to emit a new log record
*
* @cat: Category of log record (indicating which subsystem generated it)
* @level: Level of log record (indicating its severity)
* @file: File name of file where log record was generated
* @line: Line number in file where log record was generated
* @func: Function where log record was generated
* @fmt: printf() format string for log record
* @...: Optional parameters, according to the format string @fmt
* Return: 0 if log record was emitted, -ve on error
*/
int _log(enum log_category_t cat, enum log_level_t level, const char *file,
int line, const char *func, const char *fmt, ...)
__attribute__ ((format (__printf__, 6, 7)));
static inline int _log_nop(enum log_category_t cat, enum log_level_t level,
const char *file, int line, const char *func,
const char *fmt, ...)
__attribute__ ((format (__printf__, 6, 7)));
static inline int _log_nop(enum log_category_t cat, enum log_level_t level,
const char *file, int line, const char *func,
const char *fmt, ...)
{
return 0;
}
/* Define this at the top of a file to add a prefix to debug messages */
#ifndef pr_fmt
#define pr_fmt(fmt) fmt
#endif
/* Use a default category if this file does not supply one */
#ifndef LOG_CATEGORY
#define LOG_CATEGORY LOGC_NONE
#endif
/*
* This header may be including when CONFIG_LOG is disabled, in which case
* CONFIG_LOG_MAX_LEVEL is not defined. Add a check for this.
*/
#if CONFIG_IS_ENABLED(LOG)
#define _LOG_MAX_LEVEL CONFIG_VAL(LOG_MAX_LEVEL)
#define log_emer(_fmt...) log(LOG_CATEGORY, LOGL_EMERG, ##_fmt)
#define log_alert(_fmt...) log(LOG_CATEGORY, LOGL_ALERT, ##_fmt)
#define log_crit(_fmt...) log(LOG_CATEGORY, LOGL_CRIT, ##_fmt)
#define log_err(_fmt...) log(LOG_CATEGORY, LOGL_ERR, ##_fmt)
#define log_warning(_fmt...) log(LOG_CATEGORY, LOGL_WARNING, ##_fmt)
#define log_notice(_fmt...) log(LOG_CATEGORY, LOGL_NOTICE, ##_fmt)
#define log_info(_fmt...) log(LOG_CATEGORY, LOGL_INFO, ##_fmt)
#define log_debug(_fmt...) log(LOG_CATEGORY, LOGL_DEBUG, ##_fmt)
#define log_content(_fmt...) log(LOG_CATEGORY, LOGL_DEBUG_CONTENT, ##_fmt)
#define log_io(_fmt...) log(LOG_CATEGORY, LOGL_DEBUG_IO, ##_fmt)
#define log_cont(_fmt...) log(LOGC_CONT, LOGL_CONT, ##_fmt)
#else
#define _LOG_MAX_LEVEL LOGL_INFO
#define log_emerg(_fmt, ...) printf(_fmt, ##__VA_ARGS__)
#define log_alert(_fmt, ...) printf(_fmt, ##__VA_ARGS__)
#define log_crit(_fmt, ...) printf(_fmt, ##__VA_ARGS__)
#define log_err(_fmt, ...) printf(_fmt, ##__VA_ARGS__)
#define log_warning(_fmt, ...) printf(_fmt, ##__VA_ARGS__)
#define log_notice(_fmt, ...) printf(_fmt, ##__VA_ARGS__)
#define log_info(_fmt, ...) printf(_fmt, ##__VA_ARGS__)
#define log_cont(_fmt, ...) printf(_fmt, ##__VA_ARGS__)
#define log_debug(_fmt, ...) debug(_fmt, ##__VA_ARGS__)
#define log_content(_fmt...) log_nop(LOG_CATEGORY, \
LOGL_DEBUG_CONTENT, ##_fmt)
#define log_io(_fmt...) log_nop(LOG_CATEGORY, LOGL_DEBUG_IO, ##_fmt)
#endif
#if CONFIG_IS_ENABLED(LOG)
#ifdef LOG_DEBUG
#define _LOG_DEBUG LOGL_FORCE_DEBUG
#else
#define _LOG_DEBUG 0
#endif
/* Emit a log record if the level is less that the maximum */
#define log(_cat, _level, _fmt, _args...) ({ \
int _l = _level; \
if (CONFIG_IS_ENABLED(LOG) && \
(_LOG_DEBUG != 0 || _l <= _LOG_MAX_LEVEL)) \
_log((enum log_category_t)(_cat), \
(enum log_level_t)(_l | _LOG_DEBUG), __FILE__, \
__LINE__, __func__, \
pr_fmt(_fmt), ##_args); \
})
#else
#define log(_cat, _level, _fmt, _args...)
#endif
#define log_nop(_cat, _level, _fmt, _args...) ({ \
int _l = _level; \
_log_nop((enum log_category_t)(_cat), _l, __FILE__, __LINE__, \
__func__, pr_fmt(_fmt), ##_args); \
})
#ifdef DEBUG
#define _DEBUG 1
#else
#define _DEBUG 0
#endif
#ifdef CONFIG_SPL_BUILD
#define _SPL_BUILD 1
#else
#define _SPL_BUILD 0
#endif
#if CONFIG_IS_ENABLED(LOG)
#define debug_cond(cond, fmt, args...) \
({ \
if (cond) \
log(LOG_CATEGORY, \
(enum log_level_t)(LOGL_FORCE_DEBUG | _LOG_DEBUG), \
fmt, ##args); \
})
#else /* _DEBUG */
/*
* Output a debug text when condition "cond" is met. The "cond" should be
* computed by a preprocessor in the best case, allowing for the best
* optimization.
*/
#define debug_cond(cond, fmt, args...) \
({ \
if (cond) \
printf(pr_fmt(fmt), ##args); \
})
#endif /* _DEBUG */
/* Show a message if DEBUG is defined in a file */
#define debug(fmt, args...) \
debug_cond(_DEBUG, fmt, ##args)
/* Show a message if not in SPL */
#define warn_non_spl(fmt, args...) \
debug_cond(!_SPL_BUILD, fmt, ##args)
/*
* An assertion is run-time check done in debug mode only. If DEBUG is not
* defined then it is skipped. If DEBUG is defined and the assertion fails,
* then it calls panic*( which may or may not reset/halt U-Boot (see
* CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
* before release, and after release it is hoped that they don't matter. But
* in any case these failing assertions cannot be fixed with a reset (which
* may just do the same assertion again).
*/
void __assert_fail(const char *assertion, const char *file, unsigned int line,
const char *function);
/**
* assert() - assert expression is true
*
* If the expression x evaluates to false and _DEBUG evaluates to true, a panic
* message is written and the system stalls. The value of _DEBUG is set to true
* if DEBUG is defined before including common.h.
*
* The expression x is always executed irrespective of the value of _DEBUG.
*
* @x: expression to test
*/
#define assert(x) \
({ if (!(x) && _DEBUG) \
__assert_fail(#x, __FILE__, __LINE__, __func__); })
/*
* This one actually gets compiled in even without DEBUG. It doesn't include the
* full pathname as it may be huge. Only use this when the user should be
* warning, similar to BUG_ON() in linux.
*
* Return: true if assertion succeeded (condition is true), else false
*/
#define assert_noisy(x) \
({ bool _val = (x); \
if (!_val) \
__assert_fail(#x, "?", __LINE__, __func__); \
_val; \
})
#if CONFIG_IS_ENABLED(LOG) && defined(CONFIG_LOG_ERROR_RETURN)
/*
* Log an error return value, possibly with a message. Usage:
*
* return log_ret(fred_call());
*
* or:
*
* return log_msg_ret("fred failed", fred_call());
*/
#define log_ret(_ret) ({ \
int __ret = (_ret); \
if (__ret < 0) \
log(LOG_CATEGORY, LOGL_ERR, "returning err=%d\n", __ret); \
__ret; \
})
#define log_msg_ret(_msg, _ret) ({ \
int __ret = (_ret); \
if (__ret < 0) \
log(LOG_CATEGORY, LOGL_ERR, "%s: returning err=%d\n", _msg, \
__ret); \
__ret; \
})
/*
* Similar to the above, but any non-zero value is consider an error, not just
* values less than 0.
*/
#define log_retz(_ret) ({ \
int __ret = (_ret); \
if (__ret) \
log(LOG_CATEGORY, LOGL_ERR, "returning err=%d\n", __ret); \
__ret; \
})
#define log_msg_retz(_msg, _ret) ({ \
int __ret = (_ret); \
if (__ret) \
log(LOG_CATEGORY, LOGL_ERR, "%s: returning err=%d\n", _msg, \
__ret); \
__ret; \
})
#else
/* Non-logging versions of the above which just return the error code */
#define log_ret(_ret) (_ret)
#define log_msg_ret(_msg, _ret) ((void)(_msg), _ret)
#define log_retz(_ret) (_ret)
#define log_msg_retz(_msg, _ret) ((void)(_msg), _ret)
#endif
/** * enum log_rec_flags - Flags for a log record */
enum log_rec_flags {
/** @LOGRECF_FORCE_DEBUG: Force output of debug record */
LOGRECF_FORCE_DEBUG = BIT(0),
/** @LOGRECF_CONT: Continuation of previous log record */
LOGRECF_CONT = BIT(1),
};
/**
* struct log_rec - a single log record
*
* Holds information about a single record in the log
*
* Members marked as 'not allocated' are stored as pointers and the caller is
* responsible for making sure that the data pointed to is not overwritten.
* Members marked as 'allocated' are allocated (e.g. via strdup()) by the log
* system.
*
* TODO(sjg@chromium.org): Compress this struct down a bit to reduce space, e.g.
* a single u32 for cat, level, line and force_debug
*
* @cat: Category, representing a uclass or part of U-Boot
* @level: Severity level, less severe is higher
* @line: Line number where the log record was generated
* @flags: Flags for log record (enum log_rec_flags)
* @file: Name of file where the log record was generated (not allocated)
* @func: Function where the log record was generated (not allocated)
* @msg: Log message (allocated)
*/
struct log_rec {
enum log_category_t cat;
enum log_level_t level;
u16 line;
u8 flags;
const char *file;
const char *func;
const char *msg;
};
struct log_device;
enum log_device_flags {
LOGDF_ENABLE = BIT(0), /* Device is enabled */
};
/**
* struct log_driver - a driver which accepts and processes log records
*
* @name: Name of driver
* @emit: Method to call to emit a log record via this device
* @flags: Initial value for flags (use LOGDF_ENABLE to enable on start-up)
*/
struct log_driver {
const char *name;
/**
* @emit: emit a log record
*
* Called by the log system to pass a log record to a particular driver
* for processing. The filter is checked before calling this function.
*/
int (*emit)(struct log_device *ldev, struct log_rec *rec);
unsigned short flags;
};
/**
* struct log_device - an instance of a log driver
*
* Since drivers are set up at build-time we need to have a separate device for
* the run-time aspects of drivers (currently just a list of filters to apply
* to records send to this device).
*
* @next_filter_num: Sequence number of next filter filter added (0=no filters
* yet). This increments with each new filter on the device, but never
* decrements
* @flags: Flags for this filter (enum log_device_flags)
* @drv: Pointer to driver for this device
* @filter_head: List of filters for this device
* @sibling_node: Next device in the list of all devices
*/
struct log_device {
unsigned short next_filter_num;
unsigned short flags;
struct log_driver *drv;
struct list_head filter_head;
struct list_head sibling_node;
};
enum {
LOGF_MAX_CATEGORIES = 5, /* maximum categories per filter */
};
/**
* enum log_filter_flags - Flags which modify a filter
*/
enum log_filter_flags {
/** @LOGFF_HAS_CAT: Filter has a category list */
LOGFF_HAS_CAT = 1 << 0,
/** @LOGFF_DENY: Filter denies matching messages */
LOGFF_DENY = 1 << 1,
/** @LOGFF_LEVEL_MIN: Filter's level is a minimum, not a maximum */
LOGFF_LEVEL_MIN = 1 << 2,
};
/**
* struct log_filter - criteria to filter out log messages
*
* If a message matches all criteria, then it is allowed. If LOGFF_DENY is set,
* then it is denied instead.
*
* @filter_num: Sequence number of this filter. This is returned when adding a
* new filter, and must be provided when removing a previously added
* filter.
* @flags: Flags for this filter (``LOGFF_...``)
* @cat_list: List of categories to allow (terminated by %LOGC_END). If empty
* then all categories are permitted. Up to %LOGF_MAX_CATEGORIES entries
* can be provided
* @level: Maximum (or minimum, if %LOGFF_MIN_LEVEL) log level to allow
* @file_list: List of files to allow, separated by comma. If NULL then all
* files are permitted
* @sibling_node: Next filter in the list of filters for this log device
*/
struct log_filter {
int filter_num;
int flags;
enum log_category_t cat_list[LOGF_MAX_CATEGORIES];
enum log_level_t level;
const char *file_list;
struct list_head sibling_node;
};
#define LOG_DRIVER(_name) \
ll_entry_declare(struct log_driver, _name, log_driver)
/* Get a pointer to a given driver */
#define LOG_GET_DRIVER(__name) \
ll_entry_get(struct log_driver, __name, log_driver)
/**
* log_get_cat_name() - Get the name of a category
*
* @cat: Category to look up
* Return: category name (which may be a uclass driver name) if found, or
* "<invalid>" if invalid, or "<missing>" if not found. All error
* responses begin with '<'.
*/
const char *log_get_cat_name(enum log_category_t cat);
/**
* log_get_cat_by_name() - Look up a category by name
*
* @name: Name to look up
* Return: Category, or %LOGC_NONE if not found
*/
enum log_category_t log_get_cat_by_name(const char *name);
/**
* log_get_level_name() - Get the name of a log level
*
* @level: Log level to look up
* Return: Log level name (in ALL CAPS)
*/
const char *log_get_level_name(enum log_level_t level);
/**
* log_get_level_by_name() - Look up a log level by name
*
* @name: Name to look up
* Return: Log level, or %LOGL_NONE if not found
*/
enum log_level_t log_get_level_by_name(const char *name);
/**
* log_device_find_by_name() - Look up a log device by its driver's name
*
* @drv_name: Name of the driver
* Return: the log device, or %NULL if not found
*/
struct log_device *log_device_find_by_name(const char *drv_name);
/**
* log_has_cat() - check if a log category exists within a list
*
* @cat_list: List of categories to check, at most %LOGF_MAX_CATEGORIES entries
* long, terminated by %LC_END if fewer
* @cat: Category to search for
*
* Return: ``true`` if @cat is in @cat_list, else ``false``
*/
bool log_has_cat(enum log_category_t cat_list[], enum log_category_t cat);
/**
* log_has_file() - check if a file is with a list
*
* @file_list: List of files to check, separated by comma
* @file: File to check for. This string is matched against the end of each
* file in the list, i.e. ignoring any preceding path. The list is
* intended to consist of relative pathnames, e.g. common/main.c,cmd/log.c
*
* Return: ``true`` if @file is in @file_list, else ``false``
*/
bool log_has_file(const char *file_list, const char *file);
/* Log format flags (bit numbers) for gd->log_fmt. See log_fmt_chars */
enum log_fmt {
LOGF_CAT = 0,
LOGF_LEVEL,
LOGF_FILE,
LOGF_LINE,
LOGF_FUNC,
LOGF_MSG,
LOGF_COUNT,
LOGF_ALL = 0x3f,
};
/* Handle the 'log test' command */
int do_log_test(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
/**
* log_add_filter_flags() - Add a new filter to a log device, specifying flags
*
* @drv_name: Driver name to add the filter to (since each driver only has a
* single device)
* @flags: Flags for this filter (``LOGFF_...``)
* @cat_list: List of categories to allow (terminated by %LOGC_END). If empty
* then all categories are permitted. Up to %LOGF_MAX_CATEGORIES entries
* can be provided
* @level: Maximum (or minimum, if %LOGFF_LEVEL_MIN) log level to allow
* @file_list: List of files to allow, separated by comma. If NULL then all
* files are permitted
* Return:
* the sequence number of the new filter (>=0) if the filter was added, or a
* -ve value on error
*/
int log_add_filter_flags(const char *drv_name, enum log_category_t cat_list[],
enum log_level_t level, const char *file_list,
int flags);
/**
* log_add_filter() - Add a new filter to a log device
*
* @drv_name: Driver name to add the filter to (since each driver only has a
* single device)
* @cat_list: List of categories to allow (terminated by %LOGC_END). If empty
* then all categories are permitted. Up to %LOGF_MAX_CATEGORIES entries
* can be provided
* @max_level: Maximum log level to allow
* @file_list: List of files to allow, separated by comma. If %NULL then all
* files are permitted
* Return:
* the sequence number of the new filter (>=0) if the filter was added, or a
* -ve value on error
*/
static inline int log_add_filter(const char *drv_name,
enum log_category_t cat_list[],
enum log_level_t max_level,
const char *file_list)
{
return log_add_filter_flags(drv_name, cat_list, max_level, file_list,
0);
}
/**
* log_remove_filter() - Remove a filter from a log device
*
* @drv_name: Driver name to remove the filter from (since each driver only has
* a single device)
* @filter_num: Filter number to remove (as returned by log_add_filter())
* Return:
* 0 if the filter was removed, -%ENOENT if either the driver or the filter
* number was not found
*/
int log_remove_filter(const char *drv_name, int filter_num);
/**
* log_device_set_enable() - Enable or disable a log device
*
* Devices are referenced by their driver, so use LOG_GET_DRIVER(name) to pass
* the driver to this function. For example if the driver is declared with
* LOG_DRIVER(wibble) then pass LOG_GET_DRIVER(wibble) here.
*
* @drv: Driver of device to enable
* @enable: true to enable, false to disable
* @return 0 if OK, -ENOENT if the driver was not found
*/
int log_device_set_enable(struct log_driver *drv, bool enable);
#if CONFIG_IS_ENABLED(LOG)
/**
* log_init() - Set up the log system ready for use
*
* Return: 0 if OK, -%ENOMEM if out of memory
*/
int log_init(void);
#else
static inline int log_init(void)
{
return 0;
}
#endif
/**
* log_get_default_format() - get default log format
*
* The default log format is configurable via
* %CONFIG_LOGF_FILE, %CONFIG_LOGF_LINE, and %CONFIG_LOGF_FUNC.
*
* Return: default log format
*/
static inline int log_get_default_format(void)
{
return BIT(LOGF_MSG) |
(IS_ENABLED(CONFIG_LOGF_FILE) ? BIT(LOGF_FILE) : 0) |
(IS_ENABLED(CONFIG_LOGF_LINE) ? BIT(LOGF_LINE) : 0) |
(IS_ENABLED(CONFIG_LOGF_FUNC) ? BIT(LOGF_FUNC) : 0);
}
#endif