Marek Vasut b9a2a0e2e9 mmc: Add support for downgrading HS200/HS400 to HS mode ... The mmc_select_mode_and_width() function can be called while the card is in HS200/HS400 mode and can be used to downgrade the card to lower mode, e.g. HS. This is used for example by mmc_boot_part_access_chk() which cannot access the card in HS200/HS400 mode and which is in turn called by saveenv if env is in the MMC. In such case, forcing the card clock to legacy frequency cannot work. Instead, the card must be switched to HS mode first, from which it can then be reprogrammed as needed. However, this procedure needs additional code changes, since the current implementation checks whether the card correctly switched to HS mode in mmc_set_card_speed(). The check only expects that the card will be going to HS mode from lower modes, not from higher modes, hence add a parameter which indicates that the HS200/HS400 to HS downgrade is happening. This makes the code send the switch command first, reconfigure the controller next and finally perform the EXT_CSD readback check. The last two steps cannot be done in reverse order as the card is already in HS mode when the clock are being switched on the controller side. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com>		2019-01-15 15:28:42 -05:00
..
adc	dm: adc: add uclass's mask and conversion helpers	2018-11-20 12:35:25 -05:00
ata	scsi: ceva: add ls2080a soc support	2018-12-06 14:38:03 -08:00
axi	drivers: cosmetic: Convert SPDX license tags to Linux Kernel style	2018-10-28 09:26:39 -04:00
bios_emulator	bios_emulator: remove assignment without effect	2018-07-23 14:33:21 -04:00
block	blk: Rework guard around part_init call	2018-12-12 12:14:22 -05:00
board	drivers: cosmetic: Convert SPDX license tags to Linux Kernel style	2018-10-28 09:26:39 -04:00
bootcount	bootcount: add a DM RTC backing store for bootcount	2018-12-10 10:04:45 +01:00
clk	clk: MediaTek: bind ethsys reset controller	2019-01-14 17:43:18 -05:00
core	syscon: update syscon_node_to_regmap to use the DM functions	2018-12-15 11:49:56 -05:00
cpu	cpu: Add a RISC-V CPU driver	2018-12-18 09:56:26 +08:00
crypto	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
ddr	drivers: ddr: introduce DDR driver for i.MX8M	2019-01-01 14:12:18 +01:00
demo	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
dfu	dfu: nand: Add missing dependency on CMD_MTDPARTS	2018-11-13 18:53:10 +05:30
dma	dma: add bcm6348-iudma support	2018-12-19 15:23:00 +01:00
fastboot	drivers: cosmetic: Convert SPDX license tags to Linux Kernel style	2018-10-28 09:26:39 -04:00
firmware	firmware: psci: introduce SPL_ARM_PSCI_FW	2018-12-12 12:14:25 -05:00
fpga	arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table	2018-12-20 17:12:25 +01:00
gpio	gpio: stm32f7: Fix SPL code size	2019-01-09 07:13:33 -05:00
hwspinlock	hwspinlock: add stm32 hardware spinlock support	2018-12-06 23:26:33 -05:00
i2c	i2c: tegra: Fix regression by implementing a dummy probe_chip() callback	2018-12-12 06:06:14 +01:00
input	input: i8042: Use remove() instead of exported functions	2018-12-05 06:01:35 -07:00
led	dm: led: move default state support in led uclass	2018-08-10 10:27:32 -04:00
mailbox	drivers: cosmetic: Convert SPDX license tags to Linux Kernel style	2018-10-28 09:26:39 -04:00
memory	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
misc	misc: imx8: scu: use platdata instead of priv data	2019-01-09 17:04:03 +01:00
mmc	mmc: Add support for downgrading HS200/HS400 to HS mode	2019-01-15 15:28:42 -05:00
mtd	Merge branch 'master' of git://git.denx.de/u-boot-spi	2019-01-02 14:20:29 -05:00
net	ethernet: MediaTek: add ethernet driver for MediaTek ARM-based SoCs	2019-01-14 17:43:18 -05:00
nvme	blk: Call part_init() in the post_probe() method	2018-11-14 09:16:27 -08:00
pch	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
pci	video: Allow driver to specify the line length	2018-12-03 19:09:44 +01:00
pcmcia	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
phy	phy: omap_usb2: Add support for am437x	2018-12-14 17:59:09 +01:00
pinctrl	Revert "dm: pinctrl: Prevent (re-)configuring pins when already done before relocation"	2019-01-11 10:03:42 -05:00
power	power: regulator: Allow PWM regulator to be omitted from SPL.	2019-01-02 22:38:09 +01:00
pwm	pwm: sunxi: choose best prescaler to improve PWM resolution	2018-10-24 21:57:16 +05:30
qe	drivers: qe: add TFABOOT support	2018-12-06 14:37:51 -08:00
ram	rockchip: ram: update license for sdram driver	2019-01-02 22:37:10 +01:00
remoteproc	spl: Allow remoteproc drivers to be used within SPL	2018-09-11 08:32:55 -04:00
reset	reset: MedaiTek: add reset controller driver for MediaTek SoCs	2019-01-14 17:43:18 -05:00
rtc	rtc: m41t62: Convert the RTC driver to support the driver model (DM)	2018-12-03 10:44:10 -05:00
scsi	blk: Call part_init() in the post_probe() method	2018-11-14 09:16:27 -08:00
serial	drivers: serial: Add SiFive UART driver	2018-12-18 09:56:54 +08:00
smem	drivers: smem: sandbox	2018-07-19 16:31:38 -04:00
soc	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
sound	dm: sound: Use the correct number of channels for sound	2018-12-13 16:37:10 -07:00
spi	spi: sun4i: Add rx_buf NULL pointer check	2019-01-02 00:54:05 +05:30
spmi	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
sysreset	sandbox: sysreset: Update to support power-on reset	2018-12-05 06:01:34 -07:00
tee	tee: change return code for REE FS supplicant cmd	2018-12-15 11:49:19 -05:00
thermal	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
timer	timer: Add generic driver for RISC-V privileged architecture defined timer	2018-12-18 09:56:26 +08:00
tpm	tpm: Export the open/close functions	2018-11-29 09:30:06 -07:00
usb	dm: usb: gadget: Fix boot breakage on sunxi platforms	2019-01-10 18:53:03 +01:00
video	video: Add a default TrueType font	2018-12-28 12:27:53 +01:00
virtio	virtio: Add a Sandbox transport driver	2018-11-14 09:16:28 -08:00
w1	w1: Add driver for i.MX bus master controller	2019-01-01 14:12:18 +01:00
w1-eeprom	w1-eeprom: Add support for Maxim DS2502 add only memory	2018-11-16 16:51:55 -05:00
watchdog	watchdog: imx: add config to disable wdog reset	2019-01-01 14:12:18 +01:00
Kconfig	dm: Add Hardware Spinlock class	2018-12-06 23:26:32 -05:00
Makefile	Kconfig: rename CONFIG_SPL_USB_GADGET_SUPPORT as CONFIG_SPL_USB_GADGET	2019-01-10 18:52:55 +01:00