mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 01:18:52 +09:00
![]() Also drop a few files referring to no longer / not yet supported boards. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Jason Jin <jason.jin@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> |
||
---|---|---|
.. | ||
config.mk | ||
Makefile | ||
README.simpc8313 | ||
sdram.c | ||
simpc8313.c |
Sheldon Instruments SIMPC8313 Board ----------------------------------------- 1. Board Switches and Jumpers S2 is used to set CFG_RESET_SOURCE. To boot the image in Large page NAND flash, use these DIP switch settings for S2: +----------+ ON | * * **** | | * * | +----------+ 12345678 To boot the image in Small page NAND flash, use these DIP switch settings for S2: +----------+ ON | *** **** | | * | +----------+ 12345678 (where the '*' indicates the position of the tab of the switch.) 2. Memory Map The memory map looks like this: 0x0000_0000 0x1fff_ffff DDR 512M 0x8000_0000 0x8fff_ffff PCI MEM 256M 0x9000_0000 0x9fff_ffff PCI_MMIO 256M 0xe000_0000 0xe00f_ffff IMMR 1M 0xe200_0000 0xe20f_ffff PCI IO 16M 0xe280_0000 0xe280_7fff NAND FLASH (CS0) 32K or 0xe280_0000 0xe281_ffff NAND FLASH (CS0) 128K 0xff00_0000 0xff00_7fff FPGA (CS1) 1M 3. Compilation Assuming you're using BASH (or similar) as your shell: export CROSS_COMPILE=your-cross-compiler-prefix- make distclean make SIMPC8313_LP_config (or make SIMPC8313_SP_config, depending on the page size of your NAND flash) make 4. Downloading and Flashing Images 4.1 Reflash U-boot Image using U-boot =>run update_uboot You may want to try =>tftp $loadaddr $uboot first, to make sure that the TFTP load will succeed before it goes ahead and wipes out your current firmware. And of course, if the new u-boot doesn't boot, you can plug the board into your PCI slot and with the supplied driver and sample app you can reburn a working u-boot. 4.2 Downloading and Booting Linux Kernel Ensure that all networking-related environment variables are set properly (including ipaddr, serverip, gatewayip (if needed), netmask, ethaddr, eth1addr, fdtfile, and bootfile). =>tftp $loadaddr uImage =>nand write $loadaddr kernel $filesize =>tftp $loadaddr $fdtfile =>nand write $loadaddr 7e0000 1800 =>boot 5 Notes The console baudrate for SIMPC8313 is 115200bps.