mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-29 05:18:51 +09:00
![York Sun](/assets/img/avatar_default.png)
Freescale DDR driver has been used for mpc83xx, mpc85xx, mpc86xx SoCs. The similar DDR controllers will be used for ARM-based SoCs. Signed-off-by: York Sun <yorksun@freescale.com>
527 lines
15 KiB
C
527 lines
15 KiB
C
/*
|
|
* Copyright 2008-2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* Version 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <fsl_ddr_sdram.h>
|
|
|
|
#include <fsl_ddr.h>
|
|
|
|
#if defined(CONFIG_SYS_FSL_DDR3)
|
|
static unsigned int
|
|
compute_cas_latency_ddr3(const dimm_params_t *dimm_params,
|
|
common_timing_params_t *outpdimm,
|
|
unsigned int number_of_dimms)
|
|
{
|
|
unsigned int i;
|
|
unsigned int taamin_ps = 0;
|
|
unsigned int tckmin_x_ps = 0;
|
|
unsigned int common_caslat;
|
|
unsigned int caslat_actual;
|
|
unsigned int retry = 16;
|
|
unsigned int tmp;
|
|
const unsigned int mclk_ps = get_memory_clk_period_ps();
|
|
|
|
/* compute the common CAS latency supported between slots */
|
|
tmp = dimm_params[0].caslat_x;
|
|
for (i = 1; i < number_of_dimms; i++) {
|
|
if (dimm_params[i].n_ranks)
|
|
tmp &= dimm_params[i].caslat_x;
|
|
}
|
|
common_caslat = tmp;
|
|
|
|
/* compute the max tAAmin tCKmin between slots */
|
|
for (i = 0; i < number_of_dimms; i++) {
|
|
taamin_ps = max(taamin_ps, dimm_params[i].taa_ps);
|
|
tckmin_x_ps = max(tckmin_x_ps, dimm_params[i].tckmin_x_ps);
|
|
}
|
|
/* validate if the memory clk is in the range of dimms */
|
|
if (mclk_ps < tckmin_x_ps) {
|
|
printf("DDR clock (MCLK cycle %u ps) is faster than "
|
|
"the slowest DIMM(s) (tCKmin %u ps) can support.\n",
|
|
mclk_ps, tckmin_x_ps);
|
|
}
|
|
/* determine the acutal cas latency */
|
|
caslat_actual = (taamin_ps + mclk_ps - 1) / mclk_ps;
|
|
/* check if the dimms support the CAS latency */
|
|
while (!(common_caslat & (1 << caslat_actual)) && retry > 0) {
|
|
caslat_actual++;
|
|
retry--;
|
|
}
|
|
/* once the caculation of caslat_actual is completed
|
|
* we must verify that this CAS latency value does not
|
|
* exceed tAAmax, which is 20 ns for all DDR3 speed grades
|
|
*/
|
|
if (caslat_actual * mclk_ps > 20000) {
|
|
printf("The choosen cas latency %d is too large\n",
|
|
caslat_actual);
|
|
}
|
|
outpdimm->lowest_common_SPD_caslat = caslat_actual;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* compute_lowest_common_dimm_parameters()
|
|
*
|
|
* Determine the worst-case DIMM timing parameters from the set of DIMMs
|
|
* whose parameters have been computed into the array pointed to
|
|
* by dimm_params.
|
|
*/
|
|
unsigned int
|
|
compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
|
|
common_timing_params_t *outpdimm,
|
|
const unsigned int number_of_dimms)
|
|
{
|
|
unsigned int i, j;
|
|
|
|
unsigned int tckmin_x_ps = 0;
|
|
unsigned int tckmax_ps = 0xFFFFFFFF;
|
|
unsigned int tckmax_max_ps = 0;
|
|
unsigned int trcd_ps = 0;
|
|
unsigned int trp_ps = 0;
|
|
unsigned int tras_ps = 0;
|
|
unsigned int twr_ps = 0;
|
|
unsigned int twtr_ps = 0;
|
|
unsigned int trfc_ps = 0;
|
|
unsigned int trrd_ps = 0;
|
|
unsigned int trc_ps = 0;
|
|
unsigned int refresh_rate_ps = 0;
|
|
unsigned int extended_op_srt = 1;
|
|
unsigned int tis_ps = 0;
|
|
unsigned int tih_ps = 0;
|
|
unsigned int tds_ps = 0;
|
|
unsigned int tdh_ps = 0;
|
|
unsigned int trtp_ps = 0;
|
|
unsigned int tdqsq_max_ps = 0;
|
|
unsigned int tqhs_ps = 0;
|
|
|
|
unsigned int temp1, temp2;
|
|
unsigned int additive_latency = 0;
|
|
#if !defined(CONFIG_SYS_FSL_DDR3)
|
|
const unsigned int mclk_ps = get_memory_clk_period_ps();
|
|
unsigned int lowest_good_caslat;
|
|
unsigned int not_ok;
|
|
|
|
debug("using mclk_ps = %u\n", mclk_ps);
|
|
#endif
|
|
|
|
temp1 = 0;
|
|
for (i = 0; i < number_of_dimms; i++) {
|
|
/*
|
|
* If there are no ranks on this DIMM,
|
|
* it probably doesn't exist, so skip it.
|
|
*/
|
|
if (dimm_params[i].n_ranks == 0) {
|
|
temp1++;
|
|
continue;
|
|
}
|
|
if (dimm_params[i].n_ranks == 4 && i != 0) {
|
|
printf("Found Quad-rank DIMM in wrong bank, ignored."
|
|
" Software may not run as expected.\n");
|
|
temp1++;
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* check if quad-rank DIMM is plugged if
|
|
* CONFIG_CHIP_SELECT_QUAD_CAPABLE is not defined
|
|
* Only the board with proper design is capable
|
|
*/
|
|
#ifndef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
|
|
if (dimm_params[i].n_ranks == 4 && \
|
|
CONFIG_CHIP_SELECTS_PER_CTRL/CONFIG_DIMM_SLOTS_PER_CTLR < 4) {
|
|
printf("Found Quad-rank DIMM, not able to support.");
|
|
temp1++;
|
|
continue;
|
|
}
|
|
#endif
|
|
/*
|
|
* Find minimum tckmax_ps to find fastest slow speed,
|
|
* i.e., this is the slowest the whole system can go.
|
|
*/
|
|
tckmax_ps = min(tckmax_ps, dimm_params[i].tckmax_ps);
|
|
|
|
/* Either find maximum value to determine slowest
|
|
* speed, delay, time, period, etc */
|
|
tckmin_x_ps = max(tckmin_x_ps, dimm_params[i].tckmin_x_ps);
|
|
tckmax_max_ps = max(tckmax_max_ps, dimm_params[i].tckmax_ps);
|
|
trcd_ps = max(trcd_ps, dimm_params[i].trcd_ps);
|
|
trp_ps = max(trp_ps, dimm_params[i].trp_ps);
|
|
tras_ps = max(tras_ps, dimm_params[i].tras_ps);
|
|
twr_ps = max(twr_ps, dimm_params[i].twr_ps);
|
|
twtr_ps = max(twtr_ps, dimm_params[i].twtr_ps);
|
|
trfc_ps = max(trfc_ps, dimm_params[i].trfc_ps);
|
|
trrd_ps = max(trrd_ps, dimm_params[i].trrd_ps);
|
|
trc_ps = max(trc_ps, dimm_params[i].trc_ps);
|
|
tis_ps = max(tis_ps, dimm_params[i].tis_ps);
|
|
tih_ps = max(tih_ps, dimm_params[i].tih_ps);
|
|
tds_ps = max(tds_ps, dimm_params[i].tds_ps);
|
|
tdh_ps = max(tdh_ps, dimm_params[i].tdh_ps);
|
|
trtp_ps = max(trtp_ps, dimm_params[i].trtp_ps);
|
|
tqhs_ps = max(tqhs_ps, dimm_params[i].tqhs_ps);
|
|
refresh_rate_ps = max(refresh_rate_ps,
|
|
dimm_params[i].refresh_rate_ps);
|
|
/* extended_op_srt is either 0 or 1, 0 having priority */
|
|
extended_op_srt = min(extended_op_srt,
|
|
dimm_params[i].extended_op_srt);
|
|
|
|
/*
|
|
* Find maximum tdqsq_max_ps to find slowest.
|
|
*
|
|
* FIXME: is finding the slowest value the correct
|
|
* strategy for this parameter?
|
|
*/
|
|
tdqsq_max_ps = max(tdqsq_max_ps, dimm_params[i].tdqsq_max_ps);
|
|
}
|
|
|
|
outpdimm->ndimms_present = number_of_dimms - temp1;
|
|
|
|
if (temp1 == number_of_dimms) {
|
|
debug("no dimms this memory controller\n");
|
|
return 0;
|
|
}
|
|
|
|
outpdimm->tckmin_x_ps = tckmin_x_ps;
|
|
outpdimm->tckmax_ps = tckmax_ps;
|
|
outpdimm->tckmax_max_ps = tckmax_max_ps;
|
|
outpdimm->trcd_ps = trcd_ps;
|
|
outpdimm->trp_ps = trp_ps;
|
|
outpdimm->tras_ps = tras_ps;
|
|
outpdimm->twr_ps = twr_ps;
|
|
outpdimm->twtr_ps = twtr_ps;
|
|
outpdimm->trfc_ps = trfc_ps;
|
|
outpdimm->trrd_ps = trrd_ps;
|
|
outpdimm->trc_ps = trc_ps;
|
|
outpdimm->refresh_rate_ps = refresh_rate_ps;
|
|
outpdimm->extended_op_srt = extended_op_srt;
|
|
outpdimm->tis_ps = tis_ps;
|
|
outpdimm->tih_ps = tih_ps;
|
|
outpdimm->tds_ps = tds_ps;
|
|
outpdimm->tdh_ps = tdh_ps;
|
|
outpdimm->trtp_ps = trtp_ps;
|
|
outpdimm->tdqsq_max_ps = tdqsq_max_ps;
|
|
outpdimm->tqhs_ps = tqhs_ps;
|
|
|
|
/* Determine common burst length for all DIMMs. */
|
|
temp1 = 0xff;
|
|
for (i = 0; i < number_of_dimms; i++) {
|
|
if (dimm_params[i].n_ranks) {
|
|
temp1 &= dimm_params[i].burst_lengths_bitmask;
|
|
}
|
|
}
|
|
outpdimm->all_dimms_burst_lengths_bitmask = temp1;
|
|
|
|
/* Determine if all DIMMs registered buffered. */
|
|
temp1 = temp2 = 0;
|
|
for (i = 0; i < number_of_dimms; i++) {
|
|
if (dimm_params[i].n_ranks) {
|
|
if (dimm_params[i].registered_dimm) {
|
|
temp1 = 1;
|
|
#ifndef CONFIG_SPL_BUILD
|
|
printf("Detected RDIMM %s\n",
|
|
dimm_params[i].mpart);
|
|
#endif
|
|
} else {
|
|
temp2 = 1;
|
|
#ifndef CONFIG_SPL_BUILD
|
|
printf("Detected UDIMM %s\n",
|
|
dimm_params[i].mpart);
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
|
|
outpdimm->all_dimms_registered = 0;
|
|
outpdimm->all_dimms_unbuffered = 0;
|
|
if (temp1 && !temp2) {
|
|
outpdimm->all_dimms_registered = 1;
|
|
} else if (!temp1 && temp2) {
|
|
outpdimm->all_dimms_unbuffered = 1;
|
|
} else {
|
|
printf("ERROR: Mix of registered buffered and unbuffered "
|
|
"DIMMs detected!\n");
|
|
}
|
|
|
|
temp1 = 0;
|
|
if (outpdimm->all_dimms_registered)
|
|
for (j = 0; j < 16; j++) {
|
|
outpdimm->rcw[j] = dimm_params[0].rcw[j];
|
|
for (i = 1; i < number_of_dimms; i++) {
|
|
if (!dimm_params[i].n_ranks)
|
|
continue;
|
|
if (dimm_params[i].rcw[j] != dimm_params[0].rcw[j]) {
|
|
temp1 = 1;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (temp1 != 0)
|
|
printf("ERROR: Mix different RDIMM detected!\n");
|
|
|
|
#if defined(CONFIG_SYS_FSL_DDR3)
|
|
if (compute_cas_latency_ddr3(dimm_params, outpdimm, number_of_dimms))
|
|
return 1;
|
|
#else
|
|
/*
|
|
* Compute a CAS latency suitable for all DIMMs
|
|
*
|
|
* Strategy for SPD-defined latencies: compute only
|
|
* CAS latency defined by all DIMMs.
|
|
*/
|
|
|
|
/*
|
|
* Step 1: find CAS latency common to all DIMMs using bitwise
|
|
* operation.
|
|
*/
|
|
temp1 = 0xFF;
|
|
for (i = 0; i < number_of_dimms; i++) {
|
|
if (dimm_params[i].n_ranks) {
|
|
temp2 = 0;
|
|
temp2 |= 1 << dimm_params[i].caslat_x;
|
|
temp2 |= 1 << dimm_params[i].caslat_x_minus_1;
|
|
temp2 |= 1 << dimm_params[i].caslat_x_minus_2;
|
|
/*
|
|
* FIXME: If there was no entry for X-2 (X-1) in
|
|
* the SPD, then caslat_x_minus_2
|
|
* (caslat_x_minus_1) contains either 255 or
|
|
* 0xFFFFFFFF because that's what the glorious
|
|
* __ilog2 function returns for an input of 0.
|
|
* On 32-bit PowerPC, left shift counts with bit
|
|
* 26 set (that the value of 255 or 0xFFFFFFFF
|
|
* will have), cause the destination register to
|
|
* be 0. That is why this works.
|
|
*/
|
|
temp1 &= temp2;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Step 2: check each common CAS latency against tCK of each
|
|
* DIMM's SPD.
|
|
*/
|
|
lowest_good_caslat = 0;
|
|
temp2 = 0;
|
|
while (temp1) {
|
|
not_ok = 0;
|
|
temp2 = __ilog2(temp1);
|
|
debug("checking common caslat = %u\n", temp2);
|
|
|
|
/* Check if this CAS latency will work on all DIMMs at tCK. */
|
|
for (i = 0; i < number_of_dimms; i++) {
|
|
if (!dimm_params[i].n_ranks) {
|
|
continue;
|
|
}
|
|
if (dimm_params[i].caslat_x == temp2) {
|
|
if (mclk_ps >= dimm_params[i].tckmin_x_ps) {
|
|
debug("CL = %u ok on DIMM %u at tCK=%u"
|
|
" ps with its tCKmin_X_ps of %u\n",
|
|
temp2, i, mclk_ps,
|
|
dimm_params[i].tckmin_x_ps);
|
|
continue;
|
|
} else {
|
|
not_ok++;
|
|
}
|
|
}
|
|
|
|
if (dimm_params[i].caslat_x_minus_1 == temp2) {
|
|
unsigned int tckmin_x_minus_1_ps
|
|
= dimm_params[i].tckmin_x_minus_1_ps;
|
|
if (mclk_ps >= tckmin_x_minus_1_ps) {
|
|
debug("CL = %u ok on DIMM %u at "
|
|
"tCK=%u ps with its "
|
|
"tckmin_x_minus_1_ps of %u\n",
|
|
temp2, i, mclk_ps,
|
|
tckmin_x_minus_1_ps);
|
|
continue;
|
|
} else {
|
|
not_ok++;
|
|
}
|
|
}
|
|
|
|
if (dimm_params[i].caslat_x_minus_2 == temp2) {
|
|
unsigned int tckmin_x_minus_2_ps
|
|
= dimm_params[i].tckmin_x_minus_2_ps;
|
|
if (mclk_ps >= tckmin_x_minus_2_ps) {
|
|
debug("CL = %u ok on DIMM %u at "
|
|
"tCK=%u ps with its "
|
|
"tckmin_x_minus_2_ps of %u\n",
|
|
temp2, i, mclk_ps,
|
|
tckmin_x_minus_2_ps);
|
|
continue;
|
|
} else {
|
|
not_ok++;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!not_ok) {
|
|
lowest_good_caslat = temp2;
|
|
}
|
|
|
|
temp1 &= ~(1 << temp2);
|
|
}
|
|
|
|
debug("lowest common SPD-defined CAS latency = %u\n",
|
|
lowest_good_caslat);
|
|
outpdimm->lowest_common_SPD_caslat = lowest_good_caslat;
|
|
|
|
|
|
/*
|
|
* Compute a common 'de-rated' CAS latency.
|
|
*
|
|
* The strategy here is to find the *highest* dereated cas latency
|
|
* with the assumption that all of the DIMMs will support a dereated
|
|
* CAS latency higher than or equal to their lowest dereated value.
|
|
*/
|
|
temp1 = 0;
|
|
for (i = 0; i < number_of_dimms; i++) {
|
|
temp1 = max(temp1, dimm_params[i].caslat_lowest_derated);
|
|
}
|
|
outpdimm->highest_common_derated_caslat = temp1;
|
|
debug("highest common dereated CAS latency = %u\n", temp1);
|
|
#endif /* #if defined(CONFIG_SYS_FSL_DDR3) */
|
|
|
|
/* Determine if all DIMMs ECC capable. */
|
|
temp1 = 1;
|
|
for (i = 0; i < number_of_dimms; i++) {
|
|
if (dimm_params[i].n_ranks &&
|
|
!(dimm_params[i].edc_config & EDC_ECC)) {
|
|
temp1 = 0;
|
|
break;
|
|
}
|
|
}
|
|
if (temp1) {
|
|
debug("all DIMMs ECC capable\n");
|
|
} else {
|
|
debug("Warning: not all DIMMs ECC capable, cant enable ECC\n");
|
|
}
|
|
outpdimm->all_dimms_ecc_capable = temp1;
|
|
|
|
#ifndef CONFIG_SYS_FSL_DDR3
|
|
/* FIXME: move to somewhere else to validate. */
|
|
if (mclk_ps > tckmax_max_ps) {
|
|
printf("Warning: some of the installed DIMMs "
|
|
"can not operate this slowly.\n");
|
|
return 1;
|
|
}
|
|
#endif
|
|
/*
|
|
* Compute additive latency.
|
|
*
|
|
* For DDR1, additive latency should be 0.
|
|
*
|
|
* For DDR2, with ODT enabled, use "a value" less than ACTTORW,
|
|
* which comes from Trcd, and also note that:
|
|
* add_lat + caslat must be >= 4
|
|
*
|
|
* For DDR3, we use the AL=0
|
|
*
|
|
* When to use additive latency for DDR2:
|
|
*
|
|
* I. Because you are using CL=3 and need to do ODT on writes and
|
|
* want functionality.
|
|
* 1. Are you going to use ODT? (Does your board not have
|
|
* additional termination circuitry for DQ, DQS, DQS_,
|
|
* DM, RDQS, RDQS_ for x4/x8 configs?)
|
|
* 2. If so, is your lowest supported CL going to be 3?
|
|
* 3. If so, then you must set AL=1 because
|
|
*
|
|
* WL >= 3 for ODT on writes
|
|
* RL = AL + CL
|
|
* WL = RL - 1
|
|
* ->
|
|
* WL = AL + CL - 1
|
|
* AL + CL - 1 >= 3
|
|
* AL + CL >= 4
|
|
* QED
|
|
*
|
|
* RL >= 3 for ODT on reads
|
|
* RL = AL + CL
|
|
*
|
|
* Since CL aren't usually less than 2, AL=0 is a minimum,
|
|
* so the WL-derived AL should be the -- FIXME?
|
|
*
|
|
* II. Because you are using auto-precharge globally and want to
|
|
* use additive latency (posted CAS) to get more bandwidth.
|
|
* 1. Are you going to use auto-precharge mode globally?
|
|
*
|
|
* Use addtivie latency and compute AL to be 1 cycle less than
|
|
* tRCD, i.e. the READ or WRITE command is in the cycle
|
|
* immediately following the ACTIVATE command..
|
|
*
|
|
* III. Because you feel like it or want to do some sort of
|
|
* degraded-performance experiment.
|
|
* 1. Do you just want to use additive latency because you feel
|
|
* like it?
|
|
*
|
|
* Validation: AL is less than tRCD, and within the other
|
|
* read-to-precharge constraints.
|
|
*/
|
|
|
|
additive_latency = 0;
|
|
|
|
#if defined(CONFIG_SYS_FSL_DDR2)
|
|
if (lowest_good_caslat < 4) {
|
|
additive_latency = (picos_to_mclk(trcd_ps) > lowest_good_caslat)
|
|
? picos_to_mclk(trcd_ps) - lowest_good_caslat : 0;
|
|
if (mclk_to_picos(additive_latency) > trcd_ps) {
|
|
additive_latency = picos_to_mclk(trcd_ps);
|
|
debug("setting additive_latency to %u because it was "
|
|
" greater than tRCD_ps\n", additive_latency);
|
|
}
|
|
}
|
|
|
|
#elif defined(CONFIG_SYS_FSL_DDR3)
|
|
/*
|
|
* The system will not use the global auto-precharge mode.
|
|
* However, it uses the page mode, so we set AL=0
|
|
*/
|
|
additive_latency = 0;
|
|
#endif
|
|
|
|
/*
|
|
* Validate additive latency
|
|
* FIXME: move to somewhere else to validate
|
|
*
|
|
* AL <= tRCD(min)
|
|
*/
|
|
if (mclk_to_picos(additive_latency) > trcd_ps) {
|
|
printf("Error: invalid additive latency exceeds tRCD(min).\n");
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* RL = CL + AL; RL >= 3 for ODT_RD_CFG to be enabled
|
|
* WL = RL - 1; WL >= 3 for ODT_WL_CFG to be enabled
|
|
* ADD_LAT (the register) must be set to a value less
|
|
* than ACTTORW if WL = 1, then AL must be set to 1
|
|
* RD_TO_PRE (the register) must be set to a minimum
|
|
* tRTP + AL if AL is nonzero
|
|
*/
|
|
|
|
/*
|
|
* Additive latency will be applied only if the memctl option to
|
|
* use it.
|
|
*/
|
|
outpdimm->additive_latency = additive_latency;
|
|
|
|
debug("tCKmin_ps = %u\n", outpdimm->tckmin_x_ps);
|
|
debug("trcd_ps = %u\n", outpdimm->trcd_ps);
|
|
debug("trp_ps = %u\n", outpdimm->trp_ps);
|
|
debug("tras_ps = %u\n", outpdimm->tras_ps);
|
|
debug("twr_ps = %u\n", outpdimm->twr_ps);
|
|
debug("twtr_ps = %u\n", outpdimm->twtr_ps);
|
|
debug("trfc_ps = %u\n", outpdimm->trfc_ps);
|
|
debug("trrd_ps = %u\n", outpdimm->trrd_ps);
|
|
debug("trc_ps = %u\n", outpdimm->trc_ps);
|
|
|
|
return 0;
|
|
}
|