mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-06 10:13:44 +09:00
700a0c648d
Old, obsolete and duplicated code was cleaned up and replace by the new partitioning method. There are two possible approaches now: * define a single, static partition * use mtdparts command line option and dynamic partitioning Default is static partitioning.
515 lines
18 KiB
C
515 lines
18 KiB
C
/*
|
||
* (C) Copyright 2000-2004
|
||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||
*
|
||
* Derived from FADS860T definitions by Magnus Damm, Helmut Buchsbaum,
|
||
* and Dan Malek
|
||
*
|
||
* Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com
|
||
*
|
||
* This header file contains values common to all FADS family boards.
|
||
*
|
||
* See file CREDITS for list of people who contributed to this
|
||
* project.
|
||
*
|
||
* This program is free software; you can redistribute it and/or
|
||
* modify it under the terms of the GNU General Public License as
|
||
* published by the Free Software Foundation; either version 2 of
|
||
* the License, or (at your option) any later version.
|
||
*
|
||
* This program is distributed in the hope that it will be useful,
|
||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
* GNU General Public License for more details.
|
||
*
|
||
* You should have received a copy of the GNU General Public License
|
||
* along with this program; if not, write to the Free Software
|
||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||
* MA 02111-1307 USA
|
||
*/
|
||
|
||
/****************************************************************************
|
||
* Flash Memory Map as used by U-Boot:
|
||
*
|
||
* Start Address Length
|
||
* +-----------------------+ 0xFE00_0000 Start of Flash -----------------
|
||
* | | 0xFE00_0100 Reset Vector
|
||
* + + 0xFE0?_????
|
||
* | U-Boot code |
|
||
* | |
|
||
* +-----------------------+ 0xFE04_0000 (sector border)
|
||
* | |
|
||
* | |
|
||
* | U-Boot environment |
|
||
* | | ^
|
||
* | | | U-Boot
|
||
* +=======================+ 0xFE08_0000 (sector border) -----------------
|
||
* | Available | | Applications
|
||
* | ... | v
|
||
*
|
||
*****************************************************************************/
|
||
|
||
#if 0
|
||
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
|
||
#else
|
||
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
||
#endif
|
||
|
||
#undef CONFIG_BOOTARGS
|
||
#define CONFIG_BOOTCOMMAND \
|
||
"dhcp;" \
|
||
"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
|
||
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
|
||
"bootm"
|
||
|
||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||
#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
|
||
|
||
/*
|
||
* New MPC86xADS and Duet provide two Ethernet connectivity options:
|
||
* 10Mbit/s on SCC and 100Mbit/s on FEC. FADS provides SCC Ethernet on
|
||
* motherboard and FEC Ethernet on daughterboard. All new PQ1 chips have
|
||
* got FEC so FEC is the default.
|
||
*/
|
||
#ifndef CONFIG_ADS
|
||
#undef CONFIG_SCC1_ENET /* Disable SCC1 ethernet */
|
||
#define CONFIG_FEC_ENET /* Use FEC ethernet */
|
||
#else /* Old ADS has not got FEC option */
|
||
#define CONFIG_SCC1_ENET /* Use SCC1 ethernet */
|
||
#undef CONFIG_FEC_ENET /* No FEC ethernet */
|
||
#endif /* !CONFIG_ADS */
|
||
|
||
#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
|
||
#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
|
||
#endif
|
||
|
||
#ifdef CONFIG_FEC_ENET
|
||
#define CFG_DISCOVER_PHY
|
||
#endif
|
||
|
||
#ifndef CONFIG_COMMANDS
|
||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
|
||
| CFG_CMD_DHCP \
|
||
| CFG_CMD_IMMAP \
|
||
| CFG_CMD_JFFS2 \
|
||
| CFG_CMD_MII \
|
||
| CFG_CMD_PCMCIA \
|
||
| CFG_CMD_PING \
|
||
)
|
||
#endif /* !CONFIG_COMMANDS */
|
||
|
||
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
||
#include <cmd_confdefs.h>
|
||
|
||
/*
|
||
* Miscellaneous configurable options
|
||
*/
|
||
#undef CFG_LONGHELP /* undef to save memory */
|
||
#define CFG_PROMPT "=>" /* Monitor Command Prompt */
|
||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||
#else
|
||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||
#endif
|
||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||
#define CFG_MAXARGS 16 /* max number of command args */
|
||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||
|
||
#define CFG_LOAD_ADDR 0x00100000
|
||
|
||
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
||
|
||
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
||
|
||
/*
|
||
* Low Level Configuration Settings
|
||
* (address mappings, register initial values, etc.)
|
||
* You should know what you are doing if you make changes here.
|
||
*/
|
||
/*-----------------------------------------------------------------------
|
||
* Internal Memory Mapped Register
|
||
*/
|
||
#define CFG_IMMR 0xFF000000
|
||
|
||
/*-----------------------------------------------------------------------
|
||
* Definitions for initial stack pointer and data area (in DPRAM)
|
||
*/
|
||
#define CFG_INIT_RAM_ADDR CFG_IMMR
|
||
#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
|
||
#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
|
||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
||
|
||
/*-----------------------------------------------------------------------
|
||
* Start addresses for the final memory configuration
|
||
* (Set up by the startup code)
|
||
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
||
*/
|
||
#define CFG_SDRAM_BASE 0x00000000
|
||
#if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC885ADS) /* New ADS or Duet */
|
||
#define CFG_SDRAM_SIZE 0x00800000 /* 8 Mbyte */
|
||
#elif defined(CONFIG_FADS) /* Old/new FADS */
|
||
#define CFG_SDRAM_SIZE 0x00400000 /* 4 Mbyte */
|
||
#else /* Old ADS */
|
||
#define CFG_SDRAM_SIZE 0x00000000 /* No SDRAM */
|
||
#endif
|
||
|
||
#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
|
||
#if (CFG_SDRAM_SIZE)
|
||
#define CFG_MEMTEST_END CFG_SDRAM_SIZE /* 1 ... SDRAM_SIZE */
|
||
#else
|
||
#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
|
||
#endif /* CFG_SDRAM_SIZE */
|
||
|
||
/*
|
||
* For booting Linux, the board info and command line data
|
||
* have to be in the first 8 MB of memory, since this is
|
||
* the maximum mapped by the Linux kernel during initialization.
|
||
*/
|
||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||
|
||
#define CFG_MONITOR_BASE TEXT_BASE
|
||
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */
|
||
|
||
#ifdef CONFIG_BZIP2
|
||
#define CFG_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */
|
||
#else
|
||
#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */
|
||
#endif /* CONFIG_BZIP2 */
|
||
|
||
/*-----------------------------------------------------------------------
|
||
* Flash organization
|
||
*/
|
||
#define CFG_FLASH_BASE CFG_MONITOR_BASE
|
||
#define CFG_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */
|
||
|
||
#define CFG_MAX_FLASH_BANKS 4 /* max number of memory banks */
|
||
#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
|
||
|
||
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
||
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
||
|
||
#define CFG_ENV_IS_IN_FLASH 1
|
||
#define CFG_ENV_SECT_SIZE 0x40000 /* see README - env sector total size */
|
||
#define CFG_ENV_OFFSET CFG_ENV_SECT_SIZE
|
||
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment */
|
||
|
||
#define CFG_DIRECT_FLASH_TFTP
|
||
|
||
#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
|
||
|
||
/*
|
||
* JFFS2 partitions
|
||
*
|
||
*/
|
||
/* No command line, one static partition, whole device */
|
||
#undef CONFIG_JFFS2_CMDLINE
|
||
#define CONFIG_JFFS2_DEV "nor0"
|
||
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
|
||
#define CONFIG_JFFS2_PART_OFFSET 0x00000000
|
||
|
||
/* mtdparts command line support */
|
||
/* Note: fake mtd_id used, no linux mtd map file */
|
||
/*
|
||
#define CONFIG_JFFS2_CMDLINE
|
||
#define MTDIDS_DEFAULT "nor0=fads0,nor1=fads-1,nor2=fads-2,nor3=fads-3"
|
||
#define MTDPARTS_DEFAULT "mtdparts=fads-0:-@1m(user1),fads-1:-(user2),fads-2:-(user3),fads-3:-(user4)"
|
||
*/
|
||
|
||
#define CFG_JFFS2_SORT_FRAGMENTS
|
||
#endif /* CFG_CMD_JFFS2 */
|
||
|
||
/*-----------------------------------------------------------------------
|
||
* Cache Configuration
|
||
*/
|
||
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
|
||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
|
||
#endif
|
||
|
||
/*-----------------------------------------------------------------------
|
||
* I2C configuration
|
||
*/
|
||
#if (CONFIG_COMMANDS & CFG_CMD_I2C)
|
||
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
||
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address defaults */
|
||
#define CFG_I2C_SLAVE 0x7F
|
||
#endif
|
||
|
||
/*-----------------------------------------------------------------------
|
||
* SYPCR - System Protection Control 11-9
|
||
* SYPCR can only be written once after reset!
|
||
*-----------------------------------------------------------------------
|
||
* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
|
||
*/
|
||
#if defined(CONFIG_WATCHDOG)
|
||
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
|
||
SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
|
||
#else
|
||
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
|
||
#endif
|
||
|
||
/*-----------------------------------------------------------------------
|
||
* SIUMCR - SIU Module Configuration 11-6
|
||
*-----------------------------------------------------------------------
|
||
* PCMCIA config., multi-function pin tri-state
|
||
*/
|
||
#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
|
||
|
||
/*-----------------------------------------------------------------------
|
||
* TBSCR - Time Base Status and Control 11-26
|
||
*-----------------------------------------------------------------------
|
||
* Clear Reference Interrupt Status, Timebase freezing enabled
|
||
*/
|
||
#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
|
||
|
||
/*-----------------------------------------------------------------------
|
||
* PISCR - Periodic Interrupt Status and Control 11-31
|
||
*-----------------------------------------------------------------------
|
||
* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
|
||
*/
|
||
#define CFG_PISCR (PISCR_PS | PISCR_PITF)
|
||
|
||
/*-----------------------------------------------------------------------
|
||
* SCCR - System Clock and reset Control Register 15-27
|
||
*-----------------------------------------------------------------------
|
||
* Set clock output, timebase and RTC source and divider,
|
||
* power management and some other internal clocks
|
||
*/
|
||
#define SCCR_MASK SCCR_EBDF11
|
||
#define CFG_SCCR (SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
|
||
|
||
/*-----------------------------------------------------------------------
|
||
* PLPRCR - PLL, Low-Power, and Reset Control Register 14-22
|
||
*-----------------------------------------------------------------------
|
||
* set the PLL, the low-power modes and the reset control
|
||
*/
|
||
#ifndef CFG_PLPRCR
|
||
#define CFG_PLPRCR PLPRCR_TEXPS
|
||
#endif
|
||
|
||
/*-----------------------------------------------------------------------
|
||
*
|
||
*-----------------------------------------------------------------------
|
||
*
|
||
*/
|
||
#define CFG_DER 0
|
||
|
||
/* Because of the way the 860 starts up and assigns CS0 the
|
||
* entire address space, we have to set the memory controller
|
||
* differently. Normally, you write the option register
|
||
* first, and then enable the chip select by writing the
|
||
* base register. For CS0, you must write the base register
|
||
* first, followed by the option register.
|
||
*/
|
||
|
||
/*
|
||
* Init Memory Controller:
|
||
*
|
||
* BR0/OR0 (Flash)
|
||
* BR1/OR1 (BCSR)
|
||
*/
|
||
/* the other CS:s are determined by looking at parameters in BCSRx */
|
||
|
||
#define BCSR_ADDR ((uint) 0xFF080000)
|
||
|
||
#define CFG_PRELIM_OR_AM 0xFF800000 /* OR addr mask */
|
||
|
||
/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
|
||
#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
|
||
|
||
#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) /* 8 Mbyte until detected */
|
||
#define CFG_BR0_PRELIM ((CFG_FLASH_BASE & BR_BA_MSK) | BR_V )
|
||
|
||
/* BCSRx - Board Control and Status Registers */
|
||
#define CFG_OR1_PRELIM 0xFFFF8110 /* 64Kbyte address space */
|
||
#define CFG_BR1_PRELIM ((BCSR_ADDR) | BR_V)
|
||
|
||
/*
|
||
* Internal Definitions
|
||
*
|
||
* Boot Flags
|
||
*/
|
||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||
|
||
/* values according to the manual */
|
||
|
||
#define PCMCIA_MEM_ADDR ((uint)0xFF020000)
|
||
#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
|
||
|
||
#define BCSR0 ((uint) (BCSR_ADDR + 0x00))
|
||
#define BCSR1 ((uint) (BCSR_ADDR + 0x04))
|
||
#define BCSR2 ((uint) (BCSR_ADDR + 0x08))
|
||
#define BCSR3 ((uint) (BCSR_ADDR + 0x0c))
|
||
#define BCSR4 ((uint) (BCSR_ADDR + 0x10))
|
||
|
||
/*
|
||
* (F)ADS bitvalues by Helmut Buchsbaum
|
||
*
|
||
* See User's Manual for a proper
|
||
* description of the following structures
|
||
*/
|
||
|
||
#define BCSR0_ERB ((uint)0x80000000)
|
||
#define BCSR0_IP ((uint)0x40000000)
|
||
#define BCSR0_BDIS ((uint)0x10000000)
|
||
#define BCSR0_BPS_MASK ((uint)0x0C000000)
|
||
#define BCSR0_ISB_MASK ((uint)0x01800000)
|
||
#define BCSR0_DBGC_MASK ((uint)0x00600000)
|
||
#define BCSR0_DBPC_MASK ((uint)0x00180000)
|
||
#define BCSR0_EBDF_MASK ((uint)0x00060000)
|
||
|
||
#define BCSR1_FLASH_EN ((uint)0x80000000)
|
||
#define BCSR1_DRAM_EN ((uint)0x40000000)
|
||
#define BCSR1_ETHEN ((uint)0x20000000)
|
||
#define BCSR1_IRDEN ((uint)0x10000000)
|
||
#define BCSR1_FLASH_CFG_EN ((uint)0x08000000)
|
||
#define BCSR1_CNT_REG_EN_PROTECT ((uint)0x04000000)
|
||
#define BCSR1_BCSR_EN ((uint)0x02000000)
|
||
#define BCSR1_RS232EN_1 ((uint)0x01000000)
|
||
#define BCSR1_PCCEN ((uint)0x00800000)
|
||
#define BCSR1_PCCVCC0 ((uint)0x00400000)
|
||
#define BCSR1_PCCVPP_MASK ((uint)0x00300000)
|
||
#define BCSR1_DRAM_HALF_WORD ((uint)0x00080000)
|
||
#define BCSR1_RS232EN_2 ((uint)0x00040000)
|
||
#define BCSR1_SDRAM_EN ((uint)0x00020000)
|
||
#define BCSR1_PCCVCC1 ((uint)0x00010000)
|
||
|
||
#define BCSR1_PCCVCCON BCSR1_PCCVCC0
|
||
|
||
#define BCSR2_FLASH_PD_MASK ((uint)0xF0000000)
|
||
#define BCSR2_FLASH_PD_SHIFT 28
|
||
#define BCSR2_DRAM_PD_MASK ((uint)0x07800000)
|
||
#define BCSR2_DRAM_PD_SHIFT 23
|
||
#define BCSR2_EXTTOLI_MASK ((uint)0x00780000)
|
||
#define BCSR2_DBREVNR_MASK ((uint)0x00030000)
|
||
|
||
#define BCSR3_DBID_MASK ((ushort)0x3800)
|
||
#define BCSR3_CNT_REG_EN_PROTECT ((ushort)0x0400)
|
||
#define BCSR3_BREVNR0 ((ushort)0x0080)
|
||
#define BCSR3_FLASH_PD_MASK ((ushort)0x0070)
|
||
#define BCSR3_BREVN1 ((ushort)0x0008)
|
||
#define BCSR3_BREVN2_MASK ((ushort)0x0003)
|
||
|
||
#define BCSR4_ETHLOOP ((uint)0x80000000)
|
||
#define BCSR4_TFPLDL ((uint)0x40000000)
|
||
#define BCSR4_TPSQEL ((uint)0x20000000)
|
||
#define BCSR4_SIGNAL_LAMP ((uint)0x10000000)
|
||
#define BCSR4_FETH_EN ((uint)0x08000000)
|
||
#define BCSR4_FETHCFG0 ((uint)0x04000000)
|
||
#define BCSR4_FETHFDE ((uint)0x02000000)
|
||
#define BCSR4_FETHCFG1 ((uint)0x00400000)
|
||
#define BCSR4_FETHRST ((uint)0x00200000)
|
||
|
||
#ifdef CONFIG_MPC823
|
||
#define BCSR4_USB_EN ((uint)0x08000000)
|
||
#endif /* CONFIG_MPC823 */
|
||
#ifdef CONFIG_MPC860SAR
|
||
#define BCSR4_UTOPIA_EN ((uint)0x08000000)
|
||
#endif /* CONFIG_MPC860SAR */
|
||
#ifdef CONFIG_MPC860T
|
||
#define BCSR4_FETH_EN ((uint)0x08000000)
|
||
#endif /* CONFIG_MPC860T */
|
||
#ifdef CONFIG_MPC823
|
||
#define BCSR4_USB_SPEED ((uint)0x04000000)
|
||
#endif /* CONFIG_MPC823 */
|
||
#ifdef CONFIG_MPC860T
|
||
#define BCSR4_FETHCFG0 ((uint)0x04000000)
|
||
#endif /* CONFIG_MPC860T */
|
||
#ifdef CONFIG_MPC823
|
||
#define BCSR4_VCCO ((uint)0x02000000)
|
||
#endif /* CONFIG_MPC823 */
|
||
#ifdef CONFIG_MPC860T
|
||
#define BCSR4_FETHFDE ((uint)0x02000000)
|
||
#endif /* CONFIG_MPC860T */
|
||
#ifdef CONFIG_MPC823
|
||
#define BCSR4_VIDEO_ON ((uint)0x00800000)
|
||
#endif /* CONFIG_MPC823 */
|
||
#ifdef CONFIG_MPC823
|
||
#define BCSR4_VDO_EKT_CLK_EN ((uint)0x00400000)
|
||
#endif /* CONFIG_MPC823 */
|
||
#ifdef CONFIG_MPC860T
|
||
#define BCSR4_FETHCFG1 ((uint)0x00400000)
|
||
#endif /* CONFIG_MPC860T */
|
||
#ifdef CONFIG_MPC823
|
||
#define BCSR4_VIDEO_RST ((uint)0x00200000)
|
||
#endif /* CONFIG_MPC823 */
|
||
#ifdef CONFIG_MPC860T
|
||
#define BCSR4_FETHRST ((uint)0x00200000)
|
||
#endif /* CONFIG_MPC860T */
|
||
#ifdef CONFIG_MPC823
|
||
#define BCSR4_MODEM_EN ((uint)0x00100000)
|
||
#endif /* CONFIG_MPC823 */
|
||
#ifdef CONFIG_MPC823
|
||
#define BCSR4_DATA_VOICE ((uint)0x00080000)
|
||
#endif /* CONFIG_MPC823 */
|
||
#ifdef CONFIG_MPC850
|
||
#define BCSR4_DATA_VOICE ((uint)0x00080000)
|
||
#endif /* CONFIG_MPC850 */
|
||
|
||
/* BSCR5 exists on MPC86xADS and Duet ADS only */
|
||
|
||
#define CFG_PHYDEV_ADDR (BCSR_ADDR + 0x20000)
|
||
|
||
#define BCSR5 (CFG_PHYDEV_ADDR + 0x300)
|
||
|
||
#define BCSR5_MII2_EN 0x40
|
||
#define BCSR5_MII2_RST 0x20
|
||
#define BCSR5_T1_RST 0x10
|
||
#define BCSR5_ATM155_RST 0x08
|
||
#define BCSR5_ATM25_RST 0x04
|
||
#define BCSR5_MII1_EN 0x02
|
||
#define BCSR5_MII1_RST 0x01
|
||
|
||
/* We don't use the 8259.
|
||
*/
|
||
#define NR_8259_INTS 0
|
||
|
||
/* Machine type
|
||
*/
|
||
#define _MACH_8xx (_MACH_fads)
|
||
|
||
/*-----------------------------------------------------------------------
|
||
* PCMCIA stuff
|
||
*-----------------------------------------------------------------------
|
||
*/
|
||
#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
|
||
#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
|
||
#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
|
||
#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
|
||
#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
|
||
#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
|
||
#define CFG_PCMCIA_IO_ADDR (0xEC000000)
|
||
#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
|
||
|
||
/*-----------------------------------------------------------------------
|
||
* IDE/ATA stuff
|
||
*-----------------------------------------------------------------------
|
||
*/
|
||
#define CONFIG_MAC_PARTITION 1
|
||
#define CONFIG_DOS_PARTITION 1
|
||
#define CONFIG_ISO_PARTITION 1
|
||
|
||
#undef CONFIG_ATAPI
|
||
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
|
||
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
|
||
#undef CONFIG_IDE_LED /* LED for ide not supported */
|
||
#undef CONFIG_IDE_RESET /* reset for ide not supported */
|
||
|
||
#define CFG_IDE_MAXBUS 1 /* max. 2 IDE busses */
|
||
#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
|
||
|
||
#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
|
||
#define CFG_ATA_IDE0_OFFSET 0x0000
|
||
|
||
/* Offset for data I/O */
|
||
#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)
|
||
/* Offset for normal register accesses */
|
||
#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
|
||
/* Offset for alternate registers */
|
||
#define CFG_ATA_ALT_OFFSET 0x0000
|
||
|
||
#define CONFIG_DISK_SPINUP_TIME 1000000
|
||
#undef CONFIG_DISK_SPINUP_TIME /* usin<69> Compact Flash */
|