mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-28 21:09:00 +09:00
![Icenowy Zheng](/assets/img/avatar_default.png)
Previously we do not have proper dual rank memory detection on R40 (because we omitted PIR_QSGATE, which does not work on R40 with our configuration), and dual rank memory is just simply disabled as early R40 boards available (Banana Pi M2 Ultra and Berry) have single rank memory. As a board with dual rank memory (Forlinx OKA40i-C) is now known to us, we need to have a way to do memory rank detection to support that board. Add some routine to detect memory rank by trying to access the memory in rank 1 and check for error status of the memory controller, and then enable dual rank memory on R40. Similar routine can be used to detect half DQ width (which is also detected by PIR_QSGATE on other SoCs), but it's left unimplemented because there's no known R40 board with half DQ width now. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Andre Przywara <andre.przywara@arm.com> [Andre: Move R40 detect code call into sunxi_dram_init()] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
949 lines
30 KiB
C
949 lines
30 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* sun8i H3 platform dram controller init
|
|
*
|
|
* (C) Copyright 2007-2015 Allwinner Technology Co.
|
|
* Jerry Wang <wangflord@allwinnertech.com>
|
|
* (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
|
|
* (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
|
|
* (C) Copyright 2015 Jens Kuske <jenskuske@gmail.com>
|
|
*/
|
|
#include <common.h>
|
|
#include <init.h>
|
|
#include <log.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/dram.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kconfig.h>
|
|
|
|
static void mctl_phy_init(u32 val)
|
|
{
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
|
|
writel(val | PIR_INIT, &mctl_ctl->pir);
|
|
mctl_await_completion(&mctl_ctl->pgsr[0], PGSR_INIT_DONE, 0x1);
|
|
}
|
|
|
|
static void mctl_set_bit_delays(struct dram_para *para)
|
|
{
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
int i, j;
|
|
|
|
clrbits_le32(&mctl_ctl->pgcr[0], 1 << 26);
|
|
|
|
for (i = 0; i < NR_OF_BYTE_LANES; i++)
|
|
for (j = 0; j < LINES_PER_BYTE_LANE; j++)
|
|
writel(DXBDLR_WRITE_DELAY(para->dx_write_delays[i][j]) |
|
|
DXBDLR_READ_DELAY(para->dx_read_delays[i][j]),
|
|
&mctl_ctl->dx[i].bdlr[j]);
|
|
|
|
for (i = 0; i < 31; i++)
|
|
writel(ACBDLR_WRITE_DELAY(para->ac_delays[i]),
|
|
&mctl_ctl->acbdlr[i]);
|
|
|
|
#ifdef CONFIG_MACH_SUN8I_R40
|
|
/* DQSn, DMn, DQn output enable bit delay */
|
|
for (i = 0; i < 4; i++)
|
|
writel(0x6 << 24, &mctl_ctl->dx[i].sdlr);
|
|
#endif
|
|
|
|
setbits_le32(&mctl_ctl->pgcr[0], 1 << 26);
|
|
}
|
|
|
|
enum {
|
|
MBUS_PORT_CPU = 0,
|
|
MBUS_PORT_GPU = 1,
|
|
MBUS_PORT_UNUSED = 2,
|
|
MBUS_PORT_DMA = 3,
|
|
MBUS_PORT_VE = 4,
|
|
MBUS_PORT_CSI = 5,
|
|
MBUS_PORT_NAND = 6,
|
|
MBUS_PORT_SS = 7,
|
|
MBUS_PORT_DE_V3S = 8,
|
|
MBUS_PORT_DE_CFD_V3S = 9,
|
|
MBUS_PORT_TS = 8,
|
|
MBUS_PORT_DI = 9,
|
|
MBUS_PORT_DE = 10,
|
|
MBUS_PORT_DE_CFD = 11,
|
|
MBUS_PORT_UNKNOWN1 = 12,
|
|
MBUS_PORT_UNKNOWN2 = 13,
|
|
MBUS_PORT_UNKNOWN3 = 14,
|
|
};
|
|
|
|
enum {
|
|
MBUS_QOS_LOWEST = 0,
|
|
MBUS_QOS_LOW,
|
|
MBUS_QOS_HIGH,
|
|
MBUS_QOS_HIGHEST
|
|
};
|
|
|
|
static inline void mbus_configure_port(u8 port,
|
|
bool bwlimit,
|
|
bool priority,
|
|
u8 qos, /* MBUS_QOS_LOWEST .. MBUS_QOS_HIGEST */
|
|
u8 waittime, /* 0 .. 0xf */
|
|
u8 acs, /* 0 .. 0xff */
|
|
u16 bwl0, /* 0 .. 0xffff, bandwidth limit in MB/s */
|
|
u16 bwl1,
|
|
u16 bwl2)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
|
|
const u32 cfg0 = ( (bwlimit ? (1 << 0) : 0)
|
|
| (priority ? (1 << 1) : 0)
|
|
| ((qos & 0x3) << 2)
|
|
| ((waittime & 0xf) << 4)
|
|
| ((acs & 0xff) << 8)
|
|
| (bwl0 << 16) );
|
|
const u32 cfg1 = ((u32)bwl2 << 16) | (bwl1 & 0xffff);
|
|
|
|
debug("MBUS port %d cfg0 %08x cfg1 %08x\n", port, cfg0, cfg1);
|
|
writel(cfg0, &mctl_com->mcr[port][0]);
|
|
writel(cfg1, &mctl_com->mcr[port][1]);
|
|
}
|
|
|
|
#define MBUS_CONF(port, bwlimit, qos, acs, bwl0, bwl1, bwl2) \
|
|
mbus_configure_port(MBUS_PORT_ ## port, bwlimit, false, \
|
|
MBUS_QOS_ ## qos, 0, acs, bwl0, bwl1, bwl2)
|
|
|
|
static void mctl_set_master_priority_h3(void)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
|
|
/* enable bandwidth limit windows and set windows size 1us */
|
|
writel((1 << 16) | (400 << 0), &mctl_com->bwcr);
|
|
|
|
/* set cpu high priority */
|
|
writel(0x00000001, &mctl_com->mapr);
|
|
|
|
MBUS_CONF( CPU, true, HIGHEST, 0, 512, 256, 128);
|
|
MBUS_CONF( GPU, true, HIGH, 0, 1536, 1024, 256);
|
|
MBUS_CONF(UNUSED, true, HIGHEST, 0, 512, 256, 96);
|
|
MBUS_CONF( DMA, true, HIGHEST, 0, 256, 128, 32);
|
|
MBUS_CONF( VE, true, HIGH, 0, 1792, 1600, 256);
|
|
MBUS_CONF( CSI, true, HIGHEST, 0, 256, 128, 32);
|
|
MBUS_CONF( NAND, true, HIGH, 0, 256, 128, 64);
|
|
MBUS_CONF( SS, true, HIGHEST, 0, 256, 128, 64);
|
|
MBUS_CONF( TS, true, HIGHEST, 0, 256, 128, 64);
|
|
MBUS_CONF( DI, true, HIGH, 0, 1024, 256, 64);
|
|
MBUS_CONF( DE, true, HIGHEST, 3, 8192, 6120, 1024);
|
|
MBUS_CONF(DE_CFD, true, HIGH, 0, 1024, 288, 64);
|
|
}
|
|
|
|
static void mctl_set_master_priority_v3s(void)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
|
|
/* enable bandwidth limit windows and set windows size 1us */
|
|
writel((1 << 16) | (400 << 0), &mctl_com->bwcr);
|
|
|
|
/* set cpu high priority */
|
|
writel(0x00000001, &mctl_com->mapr);
|
|
|
|
MBUS_CONF( CPU, true, HIGHEST, 0, 160, 100, 80);
|
|
MBUS_CONF( GPU, true, HIGH, 0, 1792, 1536, 0);
|
|
MBUS_CONF( UNUSED, true, HIGHEST, 0, 256, 128, 80);
|
|
MBUS_CONF( DMA, true, HIGH, 0, 256, 100, 0);
|
|
MBUS_CONF( VE, true, HIGH, 0, 2048, 1600, 0);
|
|
MBUS_CONF( CSI, true, HIGHEST, 0, 384, 256, 0);
|
|
MBUS_CONF( NAND, true, HIGH, 0, 100, 50, 0);
|
|
MBUS_CONF( SS, true, HIGH, 0, 384, 256, 0);
|
|
MBUS_CONF( DE_V3S, false, HIGH, 0, 8192, 4096, 0);
|
|
MBUS_CONF(DE_CFD_V3S, true, HIGH, 0, 640, 256, 0);
|
|
}
|
|
|
|
static void mctl_set_master_priority_a64(void)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
|
|
/* enable bandwidth limit windows and set windows size 1us */
|
|
writel(399, &mctl_com->tmr);
|
|
writel((1 << 16), &mctl_com->bwcr);
|
|
|
|
/* Port 2 is reserved per Allwinner's linux-3.10 source, yet they
|
|
* initialise it */
|
|
MBUS_CONF( CPU, true, HIGHEST, 0, 160, 100, 80);
|
|
MBUS_CONF( GPU, false, HIGH, 0, 1536, 1400, 256);
|
|
MBUS_CONF(UNUSED, true, HIGHEST, 0, 512, 256, 96);
|
|
MBUS_CONF( DMA, true, HIGH, 0, 256, 80, 100);
|
|
MBUS_CONF( VE, true, HIGH, 0, 1792, 1600, 256);
|
|
MBUS_CONF( CSI, true, HIGH, 0, 256, 128, 0);
|
|
MBUS_CONF( NAND, true, HIGH, 0, 256, 128, 64);
|
|
MBUS_CONF( SS, true, HIGHEST, 0, 256, 128, 64);
|
|
MBUS_CONF( TS, true, HIGHEST, 0, 256, 128, 64);
|
|
MBUS_CONF( DI, true, HIGH, 0, 1024, 256, 64);
|
|
MBUS_CONF( DE, true, HIGH, 2, 8192, 6144, 2048);
|
|
MBUS_CONF(DE_CFD, true, HIGH, 0, 1280, 144, 64);
|
|
|
|
writel(0x81000004, &mctl_com->mdfs_bwlr[2]);
|
|
}
|
|
|
|
static void mctl_set_master_priority_h5(void)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
|
|
/* enable bandwidth limit windows and set windows size 1us */
|
|
writel(399, &mctl_com->tmr);
|
|
writel((1 << 16), &mctl_com->bwcr);
|
|
|
|
/* set cpu high priority */
|
|
writel(0x00000001, &mctl_com->mapr);
|
|
|
|
/* Port 2 is reserved per Allwinner's linux-3.10 source, yet
|
|
* they initialise it */
|
|
MBUS_CONF( CPU, true, HIGHEST, 0, 300, 260, 150);
|
|
MBUS_CONF( GPU, true, HIGHEST, 0, 600, 400, 200);
|
|
MBUS_CONF(UNUSED, true, HIGHEST, 0, 512, 256, 96);
|
|
MBUS_CONF( DMA, true, HIGHEST, 0, 256, 128, 32);
|
|
MBUS_CONF( VE, true, HIGHEST, 0, 1900, 1500, 1000);
|
|
MBUS_CONF( CSI, true, HIGHEST, 0, 150, 120, 100);
|
|
MBUS_CONF( NAND, true, HIGH, 0, 256, 128, 64);
|
|
MBUS_CONF( SS, true, HIGHEST, 0, 256, 128, 64);
|
|
MBUS_CONF( TS, true, HIGHEST, 0, 256, 128, 64);
|
|
MBUS_CONF( DI, true, HIGH, 0, 1024, 256, 64);
|
|
MBUS_CONF( DE, true, HIGHEST, 3, 3400, 2400, 1024);
|
|
MBUS_CONF(DE_CFD, true, HIGHEST, 0, 600, 400, 200);
|
|
}
|
|
|
|
static void mctl_set_master_priority_r40(void)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
|
|
/* enable bandwidth limit windows and set windows size 1us */
|
|
writel(399, &mctl_com->tmr);
|
|
writel((1 << 16), &mctl_com->bwcr);
|
|
|
|
/* set cpu high priority */
|
|
writel(0x00000001, &mctl_com->mapr);
|
|
|
|
/* Port 2 is reserved per Allwinner's linux-3.10 source, yet
|
|
* they initialise it */
|
|
MBUS_CONF( CPU, true, HIGHEST, 0, 300, 260, 150);
|
|
MBUS_CONF( GPU, true, HIGHEST, 0, 600, 400, 200);
|
|
MBUS_CONF( UNUSED, true, HIGHEST, 0, 512, 256, 96);
|
|
MBUS_CONF( DMA, true, HIGHEST, 0, 256, 128, 32);
|
|
MBUS_CONF( VE, true, HIGHEST, 0, 1900, 1500, 1000);
|
|
MBUS_CONF( CSI, true, HIGHEST, 0, 150, 120, 100);
|
|
MBUS_CONF( NAND, true, HIGH, 0, 256, 128, 64);
|
|
MBUS_CONF( SS, true, HIGHEST, 0, 256, 128, 64);
|
|
MBUS_CONF( TS, true, HIGHEST, 0, 256, 128, 64);
|
|
MBUS_CONF( DI, true, HIGH, 0, 1024, 256, 64);
|
|
|
|
/*
|
|
* The port names are probably wrong, but no correct sources
|
|
* are available.
|
|
*/
|
|
MBUS_CONF( DE, true, HIGH, 0, 128, 48, 0);
|
|
MBUS_CONF( DE_CFD, true, HIGH, 0, 384, 256, 0);
|
|
MBUS_CONF(UNKNOWN1, true, HIGHEST, 0, 512, 384, 256);
|
|
MBUS_CONF(UNKNOWN2, true, HIGHEST, 2, 8192, 6144, 1024);
|
|
MBUS_CONF(UNKNOWN3, true, HIGH, 0, 1280, 144, 64);
|
|
}
|
|
|
|
static void mctl_set_master_priority(uint16_t socid)
|
|
{
|
|
switch (socid) {
|
|
case SOCID_H3:
|
|
mctl_set_master_priority_h3();
|
|
return;
|
|
case SOCID_V3S:
|
|
mctl_set_master_priority_v3s();
|
|
return;
|
|
case SOCID_A64:
|
|
mctl_set_master_priority_a64();
|
|
return;
|
|
case SOCID_H5:
|
|
mctl_set_master_priority_h5();
|
|
return;
|
|
case SOCID_R40:
|
|
mctl_set_master_priority_r40();
|
|
return;
|
|
}
|
|
}
|
|
|
|
static u32 bin_to_mgray(int val)
|
|
{
|
|
static const u8 lookup_table[32] = {
|
|
0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05,
|
|
0x0c, 0x0d, 0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09,
|
|
0x18, 0x19, 0x1a, 0x1b, 0x1e, 0x1f, 0x1c, 0x1d,
|
|
0x14, 0x15, 0x16, 0x17, 0x12, 0x13, 0x10, 0x11,
|
|
};
|
|
|
|
return lookup_table[clamp(val, 0, 31)];
|
|
}
|
|
|
|
static int mgray_to_bin(u32 val)
|
|
{
|
|
static const u8 lookup_table[32] = {
|
|
0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05,
|
|
0x0e, 0x0f, 0x0c, 0x0d, 0x08, 0x09, 0x0a, 0x0b,
|
|
0x1e, 0x1f, 0x1c, 0x1d, 0x18, 0x19, 0x1a, 0x1b,
|
|
0x10, 0x11, 0x12, 0x13, 0x16, 0x17, 0x14, 0x15,
|
|
};
|
|
|
|
return lookup_table[val & 0x1f];
|
|
}
|
|
|
|
static void mctl_h3_zq_calibration_quirk(struct dram_para *para)
|
|
{
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
int zq_count;
|
|
|
|
#if defined CONFIG_SUNXI_DRAM_DW_16BIT
|
|
zq_count = 4;
|
|
#else
|
|
zq_count = 6;
|
|
#endif
|
|
|
|
if ((readl(SUNXI_SRAMC_BASE + 0x24) & 0xff) == 0 &&
|
|
(readl(SUNXI_SRAMC_BASE + 0xf0) & 0x1) == 0) {
|
|
u32 reg_val;
|
|
|
|
clrsetbits_le32(&mctl_ctl->zqcr, 0xffff,
|
|
CONFIG_DRAM_ZQ & 0xffff);
|
|
|
|
writel(PIR_CLRSR, &mctl_ctl->pir);
|
|
mctl_phy_init(PIR_ZCAL);
|
|
|
|
reg_val = readl(&mctl_ctl->zqdr[0]);
|
|
reg_val &= (0x1f << 16) | (0x1f << 0);
|
|
reg_val |= reg_val << 8;
|
|
writel(reg_val, &mctl_ctl->zqdr[0]);
|
|
|
|
reg_val = readl(&mctl_ctl->zqdr[1]);
|
|
reg_val &= (0x1f << 16) | (0x1f << 0);
|
|
reg_val |= reg_val << 8;
|
|
writel(reg_val, &mctl_ctl->zqdr[1]);
|
|
writel(reg_val, &mctl_ctl->zqdr[2]);
|
|
} else {
|
|
int i;
|
|
u16 zq_val[6];
|
|
u8 val;
|
|
|
|
writel(0x0a0a0a0a, &mctl_ctl->zqdr[2]);
|
|
|
|
for (i = 0; i < zq_count; i++) {
|
|
u8 zq = (CONFIG_DRAM_ZQ >> (i * 4)) & 0xf;
|
|
|
|
writel((zq << 20) | (zq << 16) | (zq << 12) |
|
|
(zq << 8) | (zq << 4) | (zq << 0),
|
|
&mctl_ctl->zqcr);
|
|
|
|
writel(PIR_CLRSR, &mctl_ctl->pir);
|
|
mctl_phy_init(PIR_ZCAL);
|
|
|
|
zq_val[i] = readl(&mctl_ctl->zqdr[0]) & 0xff;
|
|
writel(REPEAT_BYTE(zq_val[i]), &mctl_ctl->zqdr[2]);
|
|
|
|
writel(PIR_CLRSR, &mctl_ctl->pir);
|
|
mctl_phy_init(PIR_ZCAL);
|
|
|
|
val = readl(&mctl_ctl->zqdr[0]) >> 24;
|
|
zq_val[i] |= bin_to_mgray(mgray_to_bin(val) - 1) << 8;
|
|
}
|
|
|
|
writel((zq_val[1] << 16) | zq_val[0], &mctl_ctl->zqdr[0]);
|
|
writel((zq_val[3] << 16) | zq_val[2], &mctl_ctl->zqdr[1]);
|
|
if (zq_count > 4)
|
|
writel((zq_val[5] << 16) | zq_val[4],
|
|
&mctl_ctl->zqdr[2]);
|
|
}
|
|
}
|
|
|
|
static void mctl_v3s_zq_calibration_quirk(struct dram_para *para)
|
|
{
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
|
|
u32 reg_val;
|
|
|
|
clrsetbits_le32(&mctl_ctl->zqcr, 0xffffff,
|
|
CONFIG_DRAM_ZQ & 0xffffff);
|
|
mctl_phy_init(PIR_ZCAL);
|
|
|
|
reg_val = readl(&mctl_ctl->zqdr[0]);
|
|
reg_val &= (0x1f << 16) | (0x1f << 0);
|
|
reg_val |= reg_val << 8;
|
|
writel(reg_val, &mctl_ctl->zqdr[0]);
|
|
|
|
reg_val = readl(&mctl_ctl->zqdr[1]);
|
|
reg_val &= (0x1f << 16) | (0x1f << 0);
|
|
reg_val |= reg_val << 8;
|
|
writel(reg_val, &mctl_ctl->zqdr[1]);
|
|
}
|
|
|
|
static void mctl_set_cr(uint16_t socid, struct dram_para *para)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
|
|
writel(MCTL_CR_BL8 | MCTL_CR_INTERLEAVED |
|
|
#if defined CONFIG_SUNXI_DRAM_DDR3
|
|
MCTL_CR_DDR3 | MCTL_CR_2T |
|
|
#elif defined CONFIG_SUNXI_DRAM_DDR2
|
|
MCTL_CR_DDR2 | MCTL_CR_2T |
|
|
#elif defined CONFIG_SUNXI_DRAM_LPDDR3
|
|
MCTL_CR_LPDDR3 | MCTL_CR_1T |
|
|
#else
|
|
#error Unsupported DRAM type!
|
|
#endif
|
|
(para->ranks[0].bank_bits == 3 ? MCTL_CR_EIGHT_BANKS : MCTL_CR_FOUR_BANKS) |
|
|
MCTL_CR_BUS_FULL_WIDTH(para->bus_full_width) |
|
|
(para->dual_rank ? MCTL_CR_DUAL_RANK : MCTL_CR_SINGLE_RANK) |
|
|
MCTL_CR_PAGE_SIZE(para->ranks[0].page_size) |
|
|
MCTL_CR_ROW_BITS(para->ranks[0].row_bits), &mctl_com->cr);
|
|
|
|
if (para->dual_rank && (socid == SOCID_A64 || socid == SOCID_R40)) {
|
|
writel((para->ranks[1].bank_bits == 3 ? MCTL_CR_EIGHT_BANKS : MCTL_CR_FOUR_BANKS) |
|
|
MCTL_CR_BUS_FULL_WIDTH(para->bus_full_width) |
|
|
MCTL_CR_DUAL_RANK |
|
|
MCTL_CR_PAGE_SIZE(para->ranks[1].page_size) |
|
|
MCTL_CR_ROW_BITS(para->ranks[1].row_bits), &mctl_com->cr_r1);
|
|
}
|
|
|
|
if (socid == SOCID_R40) {
|
|
/* Mux pin to A15 address line for single rank memory. */
|
|
if (!para->dual_rank)
|
|
setbits_le32(&mctl_com->cr_r1, MCTL_CR_R1_MUX_A15);
|
|
}
|
|
}
|
|
|
|
static void mctl_sys_init(uint16_t socid, struct dram_para *para)
|
|
{
|
|
struct sunxi_ccm_reg * const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
|
|
clrbits_le32(&ccm->mbus0_clk_cfg, MBUS_CLK_GATE);
|
|
clrbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
|
|
clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
|
|
clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
|
|
clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN);
|
|
if (socid == SOCID_A64 || socid == SOCID_R40)
|
|
clrbits_le32(&ccm->pll11_cfg, CCM_PLL11_CTRL_EN);
|
|
udelay(10);
|
|
|
|
clrbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST);
|
|
udelay(1000);
|
|
|
|
if (socid == SOCID_A64 || socid == SOCID_R40) {
|
|
clock_set_pll11(CONFIG_DRAM_CLK * 2 * 1000000, false);
|
|
clrsetbits_le32(&ccm->dram_clk_cfg,
|
|
CCM_DRAMCLK_CFG_DIV_MASK |
|
|
CCM_DRAMCLK_CFG_SRC_MASK,
|
|
CCM_DRAMCLK_CFG_DIV(1) |
|
|
CCM_DRAMCLK_CFG_SRC_PLL11 |
|
|
CCM_DRAMCLK_CFG_UPD);
|
|
} else if (socid == SOCID_H3 || socid == SOCID_H5 || socid == SOCID_V3S) {
|
|
clock_set_pll5(CONFIG_DRAM_CLK * 2 * 1000000, false);
|
|
clrsetbits_le32(&ccm->dram_clk_cfg,
|
|
CCM_DRAMCLK_CFG_DIV_MASK |
|
|
CCM_DRAMCLK_CFG_SRC_MASK,
|
|
CCM_DRAMCLK_CFG_DIV(1) |
|
|
CCM_DRAMCLK_CFG_SRC_PLL5 |
|
|
CCM_DRAMCLK_CFG_UPD);
|
|
}
|
|
mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0);
|
|
|
|
setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
|
|
setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
|
|
setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
|
|
setbits_le32(&ccm->mbus0_clk_cfg, MBUS_CLK_GATE);
|
|
|
|
setbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST);
|
|
udelay(10);
|
|
|
|
writel(socid == SOCID_H5 ? 0x8000 : 0xc00e, &mctl_ctl->clken);
|
|
udelay(500);
|
|
}
|
|
|
|
/* These are more guessed based on some Allwinner code. */
|
|
#define DX_GCR_ODT_DYNAMIC (0x0 << 4)
|
|
#define DX_GCR_ODT_ALWAYS_ON (0x1 << 4)
|
|
#define DX_GCR_ODT_OFF (0x2 << 4)
|
|
|
|
static int mctl_channel_init(uint16_t socid, struct dram_para *para)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
|
|
unsigned int i;
|
|
|
|
mctl_set_cr(socid, para);
|
|
mctl_set_timing_params(socid, para);
|
|
mctl_set_master_priority(socid);
|
|
|
|
/* setting VTC, default disable all VT */
|
|
clrbits_le32(&mctl_ctl->pgcr[0], (1 << 30) | 0x3f);
|
|
if (socid == SOCID_H5)
|
|
setbits_le32(&mctl_ctl->pgcr[1], (1 << 24) | (1 << 26));
|
|
else
|
|
clrsetbits_le32(&mctl_ctl->pgcr[1], 1 << 24, 1 << 26);
|
|
|
|
/* increase DFI_PHY_UPD clock */
|
|
writel(PROTECT_MAGIC, &mctl_com->protect);
|
|
udelay(100);
|
|
clrsetbits_le32(&mctl_ctl->upd2, 0xfff << 16, 0x50 << 16);
|
|
writel(0x0, &mctl_com->protect);
|
|
udelay(100);
|
|
|
|
/* set dramc odt */
|
|
for (i = 0; i < 4; i++) {
|
|
u32 clearmask = (0x3 << 4) | (0x1 << 1) | (0x3 << 2) |
|
|
(0x3 << 12) | (0x3 << 14);
|
|
u32 setmask = IS_ENABLED(CONFIG_DRAM_ODT_EN) ?
|
|
DX_GCR_ODT_DYNAMIC : DX_GCR_ODT_OFF;
|
|
|
|
if (socid == SOCID_H5) {
|
|
clearmask |= 0x2 << 8;
|
|
setmask |= 0x4 << 8;
|
|
}
|
|
clrsetbits_le32(&mctl_ctl->dx[i].gcr, clearmask, setmask);
|
|
}
|
|
|
|
/* AC PDR should always ON */
|
|
clrsetbits_le32(&mctl_ctl->aciocr, socid == SOCID_H5 ? (0x1 << 11) : 0,
|
|
0x1 << 1);
|
|
|
|
/* set DQS auto gating PD mode */
|
|
setbits_le32(&mctl_ctl->pgcr[2], 0x3 << 6);
|
|
|
|
if (socid == SOCID_H3) {
|
|
/* dx ddr_clk & hdr_clk dynamic mode */
|
|
clrbits_le32(&mctl_ctl->pgcr[0], (0x3 << 14) | (0x3 << 12));
|
|
|
|
/* dphy & aphy phase select 270 degree */
|
|
clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
|
|
(0x1 << 10) | (0x2 << 8));
|
|
} else if (socid == SOCID_V3S) {
|
|
/* dx ddr_clk & hdr_clk dynamic mode */
|
|
clrbits_le32(&mctl_ctl->pgcr[0], (0x3 << 14) | (0x3 << 12));
|
|
|
|
/* dphy & aphy phase select 270 degree */
|
|
clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
|
|
(0x1 << 10) | (0x1 << 8));
|
|
} else if (socid == SOCID_A64 || socid == SOCID_H5) {
|
|
/* dphy & aphy phase select ? */
|
|
clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
|
|
(0x0 << 10) | (0x3 << 8));
|
|
} else if (socid == SOCID_R40) {
|
|
/* dx ddr_clk & hdr_clk dynamic mode (tpr13[9] == 0) */
|
|
clrbits_le32(&mctl_ctl->pgcr[0], (0x3 << 14) | (0x3 << 12));
|
|
|
|
/* dphy & aphy phase select ? */
|
|
clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
|
|
(0x0 << 10) | (0x3 << 8));
|
|
}
|
|
|
|
/* set half DQ */
|
|
if (!para->bus_full_width) {
|
|
#if defined CONFIG_SUNXI_DRAM_DW_32BIT
|
|
writel(0x0, &mctl_ctl->dx[2].gcr);
|
|
writel(0x0, &mctl_ctl->dx[3].gcr);
|
|
#elif defined CONFIG_SUNXI_DRAM_DW_16BIT
|
|
writel(0x0, &mctl_ctl->dx[1].gcr);
|
|
#else
|
|
#error Unsupported DRAM bus width!
|
|
#endif
|
|
}
|
|
|
|
/* data training configuration */
|
|
clrsetbits_le32(&mctl_ctl->dtcr, 0xf << 24,
|
|
(para->dual_rank ? 0x3 : 0x1) << 24);
|
|
|
|
mctl_set_bit_delays(para);
|
|
udelay(50);
|
|
|
|
if (socid == SOCID_V3S) {
|
|
mctl_v3s_zq_calibration_quirk(para);
|
|
|
|
mctl_phy_init(PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
|
|
PIR_DRAMRST | PIR_DRAMINIT | PIR_QSGATE);
|
|
} else if (socid == SOCID_H3) {
|
|
mctl_h3_zq_calibration_quirk(para);
|
|
|
|
mctl_phy_init(PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
|
|
PIR_DRAMRST | PIR_DRAMINIT | PIR_QSGATE);
|
|
} else if (socid == SOCID_A64 || socid == SOCID_H5) {
|
|
clrsetbits_le32(&mctl_ctl->zqcr, 0xffffff, CONFIG_DRAM_ZQ);
|
|
|
|
mctl_phy_init(PIR_ZCAL | PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
|
|
PIR_DRAMRST | PIR_DRAMINIT | PIR_QSGATE);
|
|
/* no PIR_QSGATE for H5 ???? */
|
|
} else if (socid == SOCID_R40) {
|
|
clrsetbits_le32(&mctl_ctl->zqcr, 0xffffff, CONFIG_DRAM_ZQ);
|
|
|
|
mctl_phy_init(PIR_ZCAL | PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
|
|
PIR_DRAMRST | PIR_DRAMINIT);
|
|
}
|
|
|
|
/* detect ranks and bus width */
|
|
if (readl(&mctl_ctl->pgsr[0]) & (0xfe << 20)) {
|
|
/* only one rank */
|
|
if (((readl(&mctl_ctl->dx[0].gsr[0]) >> 24) & 0x2)
|
|
#if defined CONFIG_SUNXI_DRAM_DW_32BIT
|
|
|| ((readl(&mctl_ctl->dx[1].gsr[0]) >> 24) & 0x2)
|
|
#endif
|
|
) {
|
|
clrsetbits_le32(&mctl_ctl->dtcr, 0xf << 24, 0x1 << 24);
|
|
para->dual_rank = 0;
|
|
}
|
|
|
|
/* only half DQ width */
|
|
#if defined CONFIG_SUNXI_DRAM_DW_32BIT
|
|
if (((readl(&mctl_ctl->dx[2].gsr[0]) >> 24) & 0x1) ||
|
|
((readl(&mctl_ctl->dx[3].gsr[0]) >> 24) & 0x1)) {
|
|
writel(0x0, &mctl_ctl->dx[2].gcr);
|
|
writel(0x0, &mctl_ctl->dx[3].gcr);
|
|
para->bus_full_width = 0;
|
|
}
|
|
#elif defined CONFIG_SUNXI_DRAM_DW_16BIT
|
|
if ((readl(&mctl_ctl->dx[1].gsr[0]) >> 24) & 0x1) {
|
|
writel(0x0, &mctl_ctl->dx[1].gcr);
|
|
para->bus_full_width = 0;
|
|
}
|
|
#endif
|
|
|
|
mctl_set_cr(socid, para);
|
|
udelay(20);
|
|
|
|
/* re-train */
|
|
mctl_phy_init(PIR_QSGATE);
|
|
if (readl(&mctl_ctl->pgsr[0]) & (0xfe << 20))
|
|
return 1;
|
|
}
|
|
|
|
/* check the dramc status */
|
|
mctl_await_completion(&mctl_ctl->statr, 0x1, 0x1);
|
|
|
|
/* liuke added for refresh debug */
|
|
setbits_le32(&mctl_ctl->rfshctl0, 0x1 << 31);
|
|
udelay(10);
|
|
clrbits_le32(&mctl_ctl->rfshctl0, 0x1 << 31);
|
|
udelay(10);
|
|
|
|
/* set PGCR3, CKE polarity */
|
|
if (socid == SOCID_H3 || socid == SOCID_V3S)
|
|
writel(0x00aa0060, &mctl_ctl->pgcr[3]);
|
|
else if (socid == SOCID_A64 || socid == SOCID_H5 || socid == SOCID_R40)
|
|
writel(0xc0aa0060, &mctl_ctl->pgcr[3]);
|
|
|
|
/* power down zq calibration module for power save */
|
|
setbits_le32(&mctl_ctl->zqcr, ZQCR_PWRDOWN);
|
|
|
|
/* enable master access */
|
|
writel(0xffffffff, &mctl_com->maer);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Test if memory at offset offset matches memory at a certain base
|
|
*/
|
|
static bool mctl_mem_matches_base(u32 offset, ulong base)
|
|
{
|
|
/* Try to write different values to RAM at two addresses */
|
|
writel(0, base);
|
|
writel(0xaa55aa55, base + offset);
|
|
dsb();
|
|
/* Check if the same value is actually observed when reading back */
|
|
return readl(base) ==
|
|
readl(base + offset);
|
|
}
|
|
|
|
static void mctl_auto_detect_dram_size_rank(uint16_t socid, struct dram_para *para, ulong base, struct rank_para *rank)
|
|
{
|
|
/* detect row address bits */
|
|
rank->page_size = 512;
|
|
rank->row_bits = 16;
|
|
rank->bank_bits = 2;
|
|
mctl_set_cr(socid, para);
|
|
|
|
for (rank->row_bits = 11; rank->row_bits < 16; rank->row_bits++)
|
|
if (mctl_mem_matches_base((1 << (rank->row_bits + rank->bank_bits)) * rank->page_size, base))
|
|
break;
|
|
|
|
/* detect bank address bits */
|
|
rank->bank_bits = 3;
|
|
mctl_set_cr(socid, para);
|
|
|
|
for (rank->bank_bits = 2; rank->bank_bits < 3; rank->bank_bits++)
|
|
if (mctl_mem_matches_base((1 << rank->bank_bits) * rank->page_size, base))
|
|
break;
|
|
|
|
/* detect page size */
|
|
rank->page_size = 8192;
|
|
mctl_set_cr(socid, para);
|
|
|
|
for (rank->page_size = 512; rank->page_size < 8192; rank->page_size *= 2)
|
|
if (mctl_mem_matches_base(rank->page_size, base))
|
|
break;
|
|
}
|
|
|
|
static unsigned long mctl_calc_rank_size(struct rank_para *rank)
|
|
{
|
|
return (1UL << (rank->row_bits + rank->bank_bits)) * rank->page_size;
|
|
}
|
|
|
|
/*
|
|
* Because we cannot do mctl_phy_init(PIR_QSGATE) on R40 now (which leads
|
|
* to failure), it's needed to detect the rank count of R40 in another way.
|
|
*
|
|
* The code here is modelled after time_out_detect() in BSP, which tries to
|
|
* access the memory and check for error code.
|
|
*
|
|
* TODO: auto detect half DQ width here
|
|
*/
|
|
static void mctl_r40_detect_rank_count(struct dram_para *para)
|
|
{
|
|
ulong rank1_base = (ulong) CONFIG_SYS_SDRAM_BASE +
|
|
mctl_calc_rank_size(¶->ranks[0]);
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
|
|
/* Enable read time out */
|
|
setbits_le32(&mctl_ctl->pgcr[0], 0x1 << 25);
|
|
|
|
(void) readl((void *) rank1_base);
|
|
udelay(10);
|
|
|
|
if (readl(&mctl_ctl->pgsr[0]) & (0x1 << 13)) {
|
|
clrsetbits_le32(&mctl_ctl->dtcr, 0xf << 24, 0x1 << 24);
|
|
para->dual_rank = 0;
|
|
}
|
|
|
|
/* Reset PHY FIFO to clear it */
|
|
clrbits_le32(&mctl_ctl->pgcr[0], 0x1 << 26);
|
|
udelay(100);
|
|
setbits_le32(&mctl_ctl->pgcr[0], 0x1 << 26);
|
|
|
|
/* Clear error status */
|
|
setbits_le32(&mctl_ctl->pgcr[0], 0x1 << 24);
|
|
|
|
/* Clear time out flag */
|
|
clrbits_le32(&mctl_ctl->pgsr[0], 0x1 << 13);
|
|
|
|
/* Disable read time out */
|
|
clrbits_le32(&mctl_ctl->pgcr[0], 0x1 << 25);
|
|
}
|
|
|
|
static void mctl_auto_detect_dram_size(uint16_t socid, struct dram_para *para)
|
|
{
|
|
mctl_auto_detect_dram_size_rank(socid, para, (ulong)CONFIG_SYS_SDRAM_BASE, ¶->ranks[0]);
|
|
|
|
if ((socid == SOCID_A64 || socid == SOCID_R40) && para->dual_rank) {
|
|
mctl_auto_detect_dram_size_rank(socid, para, (ulong)CONFIG_SYS_SDRAM_BASE + mctl_calc_rank_size(¶->ranks[0]), ¶->ranks[1]);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The actual values used here are taken from Allwinner provided boot0
|
|
* binaries, though they are probably board specific, so would likely benefit
|
|
* from invidual tuning for each board. Apparently a lot of boards copy from
|
|
* some Allwinner reference design, so we go with those generic values for now
|
|
* in the hope that they are reasonable for most (all?) boards.
|
|
*/
|
|
#define SUN8I_H3_DX_READ_DELAYS \
|
|
{{ 18, 18, 18, 18, 18, 18, 18, 18, 18, 0, 0 }, \
|
|
{ 14, 14, 14, 14, 14, 14, 14, 14, 14, 0, 0 }, \
|
|
{ 18, 18, 18, 18, 18, 18, 18, 18, 18, 0, 0 }, \
|
|
{ 14, 14, 14, 14, 14, 14, 14, 14, 14, 0, 0 }}
|
|
#define SUN8I_H3_DX_WRITE_DELAYS \
|
|
{{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 10, 10 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 10, 10 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 10, 10 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 6, 6 }}
|
|
#define SUN8I_H3_AC_DELAYS \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, \
|
|
0, 0, 0, 0, 0, 0, 0, 0, \
|
|
0, 0, 0, 0, 0, 0, 0, 0, \
|
|
0, 0, 0, 0, 0, 0, 0 }
|
|
|
|
#define SUN8I_V3S_DX_READ_DELAYS \
|
|
{{ 8, 8, 8, 8, 8, 8, 8, 8, 8, 0, 0 }, \
|
|
{ 7, 7, 7, 7, 7, 7, 7, 7, 7, 0, 0 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }}
|
|
#define SUN8I_V3S_DX_WRITE_DELAYS \
|
|
{{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 4, 4 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 2 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }}
|
|
#define SUN8I_V3S_AC_DELAYS \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, \
|
|
0, 0, 0, 0, 0, 0, 0, 0, \
|
|
0, 0, 0, 0, 0, 0, 0, 0, \
|
|
0, 0, 0, 0, 0, 0, 0 }
|
|
|
|
#define SUN8I_R40_DX_READ_DELAYS \
|
|
{{ 14, 14, 14, 14, 14, 14, 14, 14, 14, 0, 0 }, \
|
|
{ 14, 14, 14, 14, 14, 14, 14, 14, 14, 0, 0 }, \
|
|
{ 14, 14, 14, 14, 14, 14, 14, 14, 14, 0, 0 }, \
|
|
{ 14, 14, 14, 14, 14, 14, 14, 14, 14, 0, 0 } }
|
|
#define SUN8I_R40_DX_WRITE_DELAYS \
|
|
{{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0 } }
|
|
#define SUN8I_R40_AC_DELAYS \
|
|
{ 0, 0, 3, 0, 0, 0, 0, 0, \
|
|
0, 0, 0, 0, 0, 0, 0, 0, \
|
|
0, 0, 0, 0, 0, 0, 0, 0, \
|
|
0, 0, 0, 0, 0, 0, 0 }
|
|
|
|
#define SUN50I_A64_DX_READ_DELAYS \
|
|
{{ 16, 16, 16, 16, 17, 16, 16, 17, 16, 1, 0 }, \
|
|
{ 17, 17, 17, 17, 17, 17, 17, 17, 17, 1, 0 }, \
|
|
{ 16, 17, 17, 16, 16, 16, 16, 16, 16, 0, 0 }, \
|
|
{ 17, 17, 17, 17, 17, 17, 17, 17, 17, 1, 0 }}
|
|
#define SUN50I_A64_DX_WRITE_DELAYS \
|
|
{{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 15, 15 }, \
|
|
{ 0, 0, 0, 0, 1, 1, 1, 1, 0, 10, 10 }, \
|
|
{ 1, 0, 1, 1, 1, 1, 1, 1, 0, 11, 11 }, \
|
|
{ 1, 0, 0, 1, 1, 1, 1, 1, 0, 12, 12 }}
|
|
#define SUN50I_A64_AC_DELAYS \
|
|
{ 5, 5, 13, 10, 2, 5, 3, 3, \
|
|
0, 3, 3, 3, 1, 0, 0, 0, \
|
|
3, 4, 0, 3, 4, 1, 4, 0, \
|
|
1, 1, 0, 1, 13, 5, 4 }
|
|
|
|
#define SUN8I_H5_DX_READ_DELAYS \
|
|
{{ 14, 15, 17, 17, 17, 17, 17, 18, 17, 3, 3 }, \
|
|
{ 21, 21, 12, 22, 21, 21, 21, 21, 21, 3, 3 }, \
|
|
{ 16, 19, 19, 17, 22, 22, 21, 22, 19, 3, 3 }, \
|
|
{ 21, 21, 22, 22, 20, 21, 19, 19, 19, 3, 3 } }
|
|
#define SUN8I_H5_DX_WRITE_DELAYS \
|
|
{{ 1, 2, 3, 4, 3, 4, 4, 4, 6, 6, 6 }, \
|
|
{ 6, 6, 6, 5, 5, 5, 5, 5, 6, 6, 6 }, \
|
|
{ 0, 2, 4, 2, 6, 5, 5, 5, 6, 6, 6 }, \
|
|
{ 3, 3, 3, 2, 2, 1, 1, 1, 4, 4, 4 } }
|
|
#define SUN8I_H5_AC_DELAYS \
|
|
{ 0, 0, 5, 5, 0, 0, 0, 0, \
|
|
0, 0, 0, 0, 3, 3, 3, 3, \
|
|
3, 3, 3, 3, 3, 3, 3, 3, \
|
|
3, 3, 3, 3, 2, 0, 0 }
|
|
|
|
unsigned long sunxi_dram_init(void)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
|
|
unsigned long size;
|
|
|
|
struct dram_para para = {
|
|
.dual_rank = 1,
|
|
.bus_full_width = 1,
|
|
.ranks = {
|
|
{
|
|
.row_bits = 15,
|
|
.bank_bits = 3,
|
|
.page_size = 4096,
|
|
},
|
|
{
|
|
.row_bits = 15,
|
|
.bank_bits = 3,
|
|
.page_size = 4096,
|
|
}
|
|
},
|
|
|
|
#if defined(CONFIG_MACH_SUN8I_H3)
|
|
.dx_read_delays = SUN8I_H3_DX_READ_DELAYS,
|
|
.dx_write_delays = SUN8I_H3_DX_WRITE_DELAYS,
|
|
.ac_delays = SUN8I_H3_AC_DELAYS,
|
|
#elif defined(CONFIG_MACH_SUN8I_V3S)
|
|
.dx_read_delays = SUN8I_V3S_DX_READ_DELAYS,
|
|
.dx_write_delays = SUN8I_V3S_DX_WRITE_DELAYS,
|
|
.ac_delays = SUN8I_V3S_AC_DELAYS,
|
|
#elif defined(CONFIG_MACH_SUN8I_R40)
|
|
.dx_read_delays = SUN8I_R40_DX_READ_DELAYS,
|
|
.dx_write_delays = SUN8I_R40_DX_WRITE_DELAYS,
|
|
.ac_delays = SUN8I_R40_AC_DELAYS,
|
|
#elif defined(CONFIG_MACH_SUN50I)
|
|
.dx_read_delays = SUN50I_A64_DX_READ_DELAYS,
|
|
.dx_write_delays = SUN50I_A64_DX_WRITE_DELAYS,
|
|
.ac_delays = SUN50I_A64_AC_DELAYS,
|
|
#elif defined(CONFIG_MACH_SUN50I_H5)
|
|
.dx_read_delays = SUN8I_H5_DX_READ_DELAYS,
|
|
.dx_write_delays = SUN8I_H5_DX_WRITE_DELAYS,
|
|
.ac_delays = SUN8I_H5_AC_DELAYS,
|
|
#endif
|
|
};
|
|
/*
|
|
* Let the compiler optimize alternatives away by passing this value into
|
|
* the static functions. This saves us #ifdefs, but still keeps the binary
|
|
* small.
|
|
*/
|
|
#if defined(CONFIG_MACH_SUN8I_H3)
|
|
uint16_t socid = SOCID_H3;
|
|
#elif defined(CONFIG_MACH_SUN8I_R40)
|
|
uint16_t socid = SOCID_R40;
|
|
#elif defined(CONFIG_MACH_SUN8I_V3S)
|
|
uint16_t socid = SOCID_V3S;
|
|
#elif defined(CONFIG_MACH_SUN50I)
|
|
uint16_t socid = SOCID_A64;
|
|
#elif defined(CONFIG_MACH_SUN50I_H5)
|
|
uint16_t socid = SOCID_H5;
|
|
#endif
|
|
|
|
mctl_sys_init(socid, ¶);
|
|
if (mctl_channel_init(socid, ¶))
|
|
return 0;
|
|
|
|
if (para.dual_rank)
|
|
writel(0x00000303, &mctl_ctl->odtmap);
|
|
else
|
|
writel(0x00000201, &mctl_ctl->odtmap);
|
|
udelay(1);
|
|
|
|
/* odt delay */
|
|
if (socid == SOCID_H3)
|
|
writel(0x0c000400, &mctl_ctl->odtcfg);
|
|
|
|
if (socid == SOCID_A64 || socid == SOCID_H5 || socid == SOCID_R40) {
|
|
/* VTF enable (tpr13[8] == 1) */
|
|
setbits_le32(&mctl_ctl->vtfcr,
|
|
(socid != SOCID_A64 ? 3 : 2) << 8);
|
|
/* DQ hold disable (tpr13[26] == 1) */
|
|
clrbits_le32(&mctl_ctl->pgcr[2], (1 << 13));
|
|
}
|
|
|
|
/* clear credit value */
|
|
setbits_le32(&mctl_com->cccr, 1 << 31);
|
|
udelay(10);
|
|
|
|
if (socid == SOCID_R40) {
|
|
mctl_r40_detect_rank_count(¶);
|
|
mctl_set_cr(SOCID_R40, ¶);
|
|
}
|
|
|
|
mctl_auto_detect_dram_size(socid, ¶);
|
|
mctl_set_cr(socid, ¶);
|
|
|
|
size = mctl_calc_rank_size(¶.ranks[0]);
|
|
if (socid == SOCID_A64 || socid == SOCID_R40) {
|
|
if (para.dual_rank)
|
|
size += mctl_calc_rank_size(¶.ranks[1]);
|
|
} else if (para.dual_rank) {
|
|
size *= 2;
|
|
}
|
|
|
|
return size;
|
|
}
|