mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-08 13:53:21 +09:00
![Bin Meng](/assets/img/avatar_default.png)
BayTrail SoC supports both EHCI and xHCI controllers. However only one host controller (either EHCI or xHCI) can be used. To enable HSIC and SS ports, xHCI must be used. This turns on xHCI support on Intel MinnowMax board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de>
329 lines
7.3 KiB
Plaintext
329 lines
7.3 KiB
Plaintext
/*
|
|
* Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <asm/arch-baytrail/fsp/fsp_configs.h>
|
|
#include <dt-bindings/gpio/x86-gpio.h>
|
|
#include <dt-bindings/interrupt-router/intel-irq.h>
|
|
|
|
/include/ "skeleton.dtsi"
|
|
/include/ "serial.dtsi"
|
|
/include/ "rtc.dtsi"
|
|
/include/ "tsc_timer.dtsi"
|
|
/include/ "coreboot_fb.dtsi"
|
|
|
|
/ {
|
|
model = "Intel Minnowboard Max";
|
|
compatible = "intel,minnowmax", "intel,baytrail";
|
|
|
|
aliases {
|
|
serial0 = &serial;
|
|
spi0 = &spi;
|
|
};
|
|
|
|
config {
|
|
silent_console = <0>;
|
|
};
|
|
|
|
pch_pinctrl {
|
|
compatible = "intel,x86-pinctrl";
|
|
reg = <0 0>;
|
|
|
|
/* GPIO E0 */
|
|
soc_gpio_s5_0@0 {
|
|
gpio-offset = <0x80 0>;
|
|
mode-gpio;
|
|
output-value = <0>;
|
|
direction = <PIN_OUTPUT>;
|
|
};
|
|
|
|
/* GPIO E1 */
|
|
soc_gpio_s5_1@0 {
|
|
gpio-offset = <0x80 1>;
|
|
mode-gpio;
|
|
output-value = <0>;
|
|
direction = <PIN_OUTPUT>;
|
|
};
|
|
|
|
/* GPIO E2 */
|
|
soc_gpio_s5_2@0 {
|
|
gpio-offset = <0x80 2>;
|
|
mode-gpio;
|
|
output-value = <0>;
|
|
direction = <PIN_OUTPUT>;
|
|
};
|
|
|
|
pin_usb_host_en0@0 {
|
|
gpio-offset = <0x80 8>;
|
|
mode-gpio;
|
|
output-value = <1>;
|
|
direction = <PIN_OUTPUT>;
|
|
};
|
|
|
|
pin_usb_host_en1@0 {
|
|
gpio-offset = <0x80 9>;
|
|
mode-gpio;
|
|
output-value = <1>;
|
|
direction = <PIN_OUTPUT>;
|
|
};
|
|
|
|
/*
|
|
* As of today, the latest version FSP (gold4) for BayTrail
|
|
* misses the PAD configuration of the SD controller's Card
|
|
* Detect signal. The default PAD value for the CD pin sets
|
|
* the pin to work in GPIO mode, which causes card detect
|
|
* status cannot be reflected by the Present State register
|
|
* in the SD controller (bit 16 & bit 18 are always zero).
|
|
*
|
|
* Configure this pin to function 1 (SD controller).
|
|
*/
|
|
sdmmc3_cd@0 {
|
|
pad-offset = <0x3a0>;
|
|
mode-func = <1>;
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "/serial";
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "intel,baytrail-cpu";
|
|
reg = <0>;
|
|
intel,apic-id = <0>;
|
|
};
|
|
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "intel,baytrail-cpu";
|
|
reg = <1>;
|
|
intel,apic-id = <4>;
|
|
};
|
|
|
|
};
|
|
|
|
pci {
|
|
compatible = "intel,pci-baytrail", "pci-x86";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
u-boot,dm-pre-reloc;
|
|
ranges = <0x02000000 0x0 0x80000000 0x80000000 0 0x40000000
|
|
0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000
|
|
0x01000000 0x0 0x2000 0x2000 0 0xe000>;
|
|
|
|
pch@1f,0 {
|
|
reg = <0x0000f800 0 0 0 0>;
|
|
compatible = "pci8086,0f1c", "intel,pch9";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
irq-router {
|
|
compatible = "intel,irq-router";
|
|
intel,pirq-config = "ibase";
|
|
intel,ibase-offset = <0x50>;
|
|
intel,actl-addr = <0>;
|
|
intel,pirq-link = <8 8>;
|
|
intel,pirq-mask = <0xdee0>;
|
|
intel,pirq-routing = <
|
|
/* BayTrail PCI devices */
|
|
PCI_BDF(0, 2, 0) INTA PIRQA
|
|
PCI_BDF(0, 3, 0) INTA PIRQA
|
|
PCI_BDF(0, 16, 0) INTA PIRQA
|
|
PCI_BDF(0, 17, 0) INTA PIRQA
|
|
PCI_BDF(0, 18, 0) INTA PIRQA
|
|
PCI_BDF(0, 19, 0) INTA PIRQA
|
|
PCI_BDF(0, 20, 0) INTA PIRQA
|
|
PCI_BDF(0, 21, 0) INTA PIRQA
|
|
PCI_BDF(0, 22, 0) INTA PIRQA
|
|
PCI_BDF(0, 23, 0) INTA PIRQA
|
|
PCI_BDF(0, 24, 0) INTA PIRQA
|
|
PCI_BDF(0, 24, 1) INTC PIRQC
|
|
PCI_BDF(0, 24, 2) INTD PIRQD
|
|
PCI_BDF(0, 24, 3) INTB PIRQB
|
|
PCI_BDF(0, 24, 4) INTA PIRQA
|
|
PCI_BDF(0, 24, 5) INTC PIRQC
|
|
PCI_BDF(0, 24, 6) INTD PIRQD
|
|
PCI_BDF(0, 24, 7) INTB PIRQB
|
|
PCI_BDF(0, 26, 0) INTA PIRQA
|
|
PCI_BDF(0, 27, 0) INTA PIRQA
|
|
PCI_BDF(0, 28, 0) INTA PIRQA
|
|
PCI_BDF(0, 28, 1) INTB PIRQB
|
|
PCI_BDF(0, 28, 2) INTC PIRQC
|
|
PCI_BDF(0, 28, 3) INTD PIRQD
|
|
PCI_BDF(0, 29, 0) INTA PIRQA
|
|
PCI_BDF(0, 30, 0) INTA PIRQA
|
|
PCI_BDF(0, 30, 1) INTD PIRQD
|
|
PCI_BDF(0, 30, 2) INTB PIRQB
|
|
PCI_BDF(0, 30, 3) INTC PIRQC
|
|
PCI_BDF(0, 30, 4) INTD PIRQD
|
|
PCI_BDF(0, 30, 5) INTB PIRQB
|
|
PCI_BDF(0, 31, 3) INTB PIRQB
|
|
|
|
/*
|
|
* PCIe root ports downstream
|
|
* interrupts
|
|
*/
|
|
PCI_BDF(1, 0, 0) INTA PIRQA
|
|
PCI_BDF(1, 0, 0) INTB PIRQB
|
|
PCI_BDF(1, 0, 0) INTC PIRQC
|
|
PCI_BDF(1, 0, 0) INTD PIRQD
|
|
PCI_BDF(2, 0, 0) INTA PIRQB
|
|
PCI_BDF(2, 0, 0) INTB PIRQC
|
|
PCI_BDF(2, 0, 0) INTC PIRQD
|
|
PCI_BDF(2, 0, 0) INTD PIRQA
|
|
PCI_BDF(3, 0, 0) INTA PIRQC
|
|
PCI_BDF(3, 0, 0) INTB PIRQD
|
|
PCI_BDF(3, 0, 0) INTC PIRQA
|
|
PCI_BDF(3, 0, 0) INTD PIRQB
|
|
PCI_BDF(4, 0, 0) INTA PIRQD
|
|
PCI_BDF(4, 0, 0) INTB PIRQA
|
|
PCI_BDF(4, 0, 0) INTC PIRQB
|
|
PCI_BDF(4, 0, 0) INTD PIRQC
|
|
>;
|
|
};
|
|
|
|
spi: spi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "intel,ich9-spi";
|
|
spi-flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0>;
|
|
compatible = "stmicro,n25q064a",
|
|
"spi-flash";
|
|
memory-map = <0xff800000 0x00800000>;
|
|
rw-mrc-cache {
|
|
label = "rw-mrc-cache";
|
|
reg = <0x006f0000 0x00010000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
gpioa {
|
|
compatible = "intel,ich6-gpio";
|
|
u-boot,dm-pre-reloc;
|
|
reg = <0 0x20>;
|
|
bank-name = "A";
|
|
use-lvl-write-cache;
|
|
};
|
|
|
|
gpiob {
|
|
compatible = "intel,ich6-gpio";
|
|
u-boot,dm-pre-reloc;
|
|
reg = <0x20 0x20>;
|
|
bank-name = "B";
|
|
use-lvl-write-cache;
|
|
};
|
|
|
|
gpioc {
|
|
compatible = "intel,ich6-gpio";
|
|
u-boot,dm-pre-reloc;
|
|
reg = <0x40 0x20>;
|
|
bank-name = "C";
|
|
use-lvl-write-cache;
|
|
};
|
|
|
|
gpiod {
|
|
compatible = "intel,ich6-gpio";
|
|
u-boot,dm-pre-reloc;
|
|
reg = <0x60 0x20>;
|
|
bank-name = "D";
|
|
use-lvl-write-cache;
|
|
};
|
|
|
|
gpioe {
|
|
compatible = "intel,ich6-gpio";
|
|
u-boot,dm-pre-reloc;
|
|
reg = <0x80 0x20>;
|
|
bank-name = "E";
|
|
use-lvl-write-cache;
|
|
};
|
|
|
|
gpiof {
|
|
compatible = "intel,ich6-gpio";
|
|
u-boot,dm-pre-reloc;
|
|
reg = <0xA0 0x20>;
|
|
bank-name = "F";
|
|
use-lvl-write-cache;
|
|
};
|
|
};
|
|
};
|
|
|
|
fsp {
|
|
compatible = "intel,baytrail-fsp";
|
|
fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
|
|
fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
|
|
fsp,mrc-init-spd-addr1 = <0xa0>;
|
|
fsp,mrc-init-spd-addr2 = <0xa2>;
|
|
fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
|
|
fsp,enable-sdio;
|
|
fsp,enable-sdcard;
|
|
fsp,enable-hsuart1;
|
|
fsp,enable-spi;
|
|
fsp,enable-sata;
|
|
fsp,sata-mode = <SATA_MODE_AHCI>;
|
|
#ifdef CONFIG_USB_XHCI_HCD
|
|
fsp,enable-xhci;
|
|
#endif
|
|
fsp,lpe-mode = <LPE_MODE_PCI>;
|
|
fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
|
|
fsp,enable-dma0;
|
|
fsp,enable-dma1;
|
|
fsp,enable-i2c0;
|
|
fsp,enable-i2c1;
|
|
fsp,enable-i2c2;
|
|
fsp,enable-i2c3;
|
|
fsp,enable-i2c4;
|
|
fsp,enable-i2c5;
|
|
fsp,enable-i2c6;
|
|
fsp,enable-pwm0;
|
|
fsp,enable-pwm1;
|
|
fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
|
|
fsp,aperture-size = <APERTURE_SIZE_256MB>;
|
|
fsp,gtt-size = <GTT_SIZE_2MB>;
|
|
fsp,scc-mode = <SCC_MODE_PCI>;
|
|
fsp,os-selection = <OS_SELECTION_LINUX>;
|
|
fsp,emmc45-ddr50-enabled;
|
|
fsp,emmc45-retune-timer-value = <8>;
|
|
fsp,enable-igd;
|
|
fsp,enable-memory-down;
|
|
fsp,memory-down-params {
|
|
compatible = "intel,baytrail-fsp-mdp";
|
|
fsp,dram-speed = <DRAM_SPEED_1066MTS>;
|
|
fsp,dram-type = <DRAM_TYPE_DDR3L>;
|
|
fsp,dimm-0-enable;
|
|
fsp,dimm-width = <DIMM_WIDTH_X16>;
|
|
fsp,dimm-density = <DIMM_DENSITY_4GBIT>;
|
|
fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>;
|
|
fsp,dimm-sides = <DIMM_SIDES_1RANKS>;
|
|
fsp,dimm-tcl = <0xb>;
|
|
fsp,dimm-trpt-rcd = <0xb>;
|
|
fsp,dimm-twr = <0xc>;
|
|
fsp,dimm-twtr = <6>;
|
|
fsp,dimm-trrd = <6>;
|
|
fsp,dimm-trtp = <6>;
|
|
fsp,dimm-tfaw = <0x14>;
|
|
};
|
|
};
|
|
|
|
microcode {
|
|
update@0 {
|
|
#include "microcode/m0130673325.dtsi"
|
|
};
|
|
update@1 {
|
|
#include "microcode/m0130679907.dtsi"
|
|
};
|
|
};
|
|
|
|
};
|