u-boot-brain/board/armadeus/apf27/fpga.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

225 lines
5.3 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2002-2013
* Eric Jarrige <eric.jarrige@armadeus.org>
*
* based on the files by
* Rich Ireland, Enterasys Networks, rireland@enterasys.com
* and
* Keith Outwater, keith_outwater@mvis.com
*/
#include <common.h>
#include <asm/arch/imx-regs.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <command.h>
#include <config.h>
#include "fpga.h"
#include <spartan3.h>
#include "apf27.h"
/*
* Note that these are pointers to code that is in Flash. They will be
* relocated at runtime.
* Spartan2 code is used to download our Spartan 3 :) code is compatible.
* Just take care about the file size
*/
xilinx_spartan3_slave_parallel_fns fpga_fns = {
fpga_pre_fn,
fpga_pgm_fn,
fpga_init_fn,
NULL,
fpga_done_fn,
fpga_clk_fn,
fpga_cs_fn,
fpga_wr_fn,
fpga_rdata_fn,
fpga_wdata_fn,
fpga_busy_fn,
fpga_abort_fn,
fpga_post_fn,
};
xilinx_desc fpga[CONFIG_FPGA_COUNT] = {
{xilinx_spartan3,
slave_parallel,
1196128l/8,
(void *)&fpga_fns,
0,
&spartan3_op,
"3s200aft256"}
};
/*
* Initialize GPIO port B before download
*/
int fpga_pre_fn(int cookie)
{
/* Initialize GPIO pins */
gpio_set_value(ACFG_FPGA_PWR, 1);
imx_gpio_mode(ACFG_FPGA_INIT | GPIO_IN | GPIO_PUEN | GPIO_GPIO);
imx_gpio_mode(ACFG_FPGA_DONE | GPIO_IN | GPIO_PUEN | GPIO_GPIO);
imx_gpio_mode(ACFG_FPGA_PRG | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
imx_gpio_mode(ACFG_FPGA_CLK | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
imx_gpio_mode(ACFG_FPGA_RW | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
imx_gpio_mode(ACFG_FPGA_CS | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
imx_gpio_mode(ACFG_FPGA_SUSPEND|GPIO_OUT|GPIO_PUEN|GPIO_GPIO);
gpio_set_value(ACFG_FPGA_RESET, 1);
imx_gpio_mode(ACFG_FPGA_RESET | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
imx_gpio_mode(ACFG_FPGA_PWR | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
gpio_set_value(ACFG_FPGA_PRG, 1);
gpio_set_value(ACFG_FPGA_CLK, 1);
gpio_set_value(ACFG_FPGA_RW, 1);
gpio_set_value(ACFG_FPGA_CS, 1);
gpio_set_value(ACFG_FPGA_SUSPEND, 0);
gpio_set_value(ACFG_FPGA_PWR, 0);
udelay(30000); /*wait until supply started*/
return cookie;
}
/*
* Set the FPGA's active-low program line to the specified level
*/
int fpga_pgm_fn(int assert, int flush, int cookie)
{
debug("%s:%d: FPGA PROGRAM %s", __func__, __LINE__,
assert ? "high" : "low");
gpio_set_value(ACFG_FPGA_PRG, !assert);
return assert;
}
/*
* Set the FPGA's active-high clock line to the specified level
*/
int fpga_clk_fn(int assert_clk, int flush, int cookie)
{
debug("%s:%d: FPGA CLOCK %s", __func__, __LINE__,
assert_clk ? "high" : "low");
gpio_set_value(ACFG_FPGA_CLK, !assert_clk);
return assert_clk;
}
/*
* Test the state of the active-low FPGA INIT line. Return 1 on INIT
* asserted (low).
*/
int fpga_init_fn(int cookie)
{
int value;
debug("%s:%d: INIT check... ", __func__, __LINE__);
value = gpio_get_value(ACFG_FPGA_INIT);
/* printf("init value read %x",value); */
#ifdef CONFIG_SYS_FPGA_IS_PROTO
return value;
#else
return !value;
#endif
}
/*
* Test the state of the active-high FPGA DONE pin
*/
int fpga_done_fn(int cookie)
{
debug("%s:%d: DONE check... %s", __func__, __LINE__,
gpio_get_value(ACFG_FPGA_DONE) ? "high" : "low");
return gpio_get_value(ACFG_FPGA_DONE) ? FPGA_SUCCESS : FPGA_FAIL;
}
/*
* Set the FPGA's wr line to the specified level
*/
int fpga_wr_fn(int assert_write, int flush, int cookie)
{
debug("%s:%d: FPGA RW... %s ", __func__, __LINE__,
assert_write ? "high" : "low");
gpio_set_value(ACFG_FPGA_RW, !assert_write);
return assert_write;
}
int fpga_cs_fn(int assert_cs, int flush, int cookie)
{
debug("%s:%d: FPGA CS %s ", __func__, __LINE__,
assert_cs ? "high" : "low");
gpio_set_value(ACFG_FPGA_CS, !assert_cs);
return assert_cs;
}
int fpga_rdata_fn(unsigned char *data, int cookie)
{
debug("%s:%d: FPGA READ DATA %02X ", __func__, __LINE__,
*((char *)ACFG_FPGA_RDATA));
*data = (unsigned char)
((*((unsigned short *)ACFG_FPGA_RDATA))&0x00FF);
return *data;
}
int fpga_wdata_fn(unsigned char data, int flush, int cookie)
{
debug("%s:%d: FPGA WRITE DATA %02X ", __func__, __LINE__,
data);
*((unsigned short *)ACFG_FPGA_WDATA) = data;
return data;
}
int fpga_abort_fn(int cookie)
{
return fpga_post_fn(cookie);
}
int fpga_busy_fn(int cookie)
{
return 1;
}
int fpga_post_fn(int cookie)
{
debug("%s:%d: FPGA POST ", __func__, __LINE__);
imx_gpio_mode(ACFG_FPGA_RW | GPIO_PF | GPIO_PUEN);
imx_gpio_mode(ACFG_FPGA_CS | GPIO_PF | GPIO_PUEN);
imx_gpio_mode(ACFG_FPGA_CLK | GPIO_PF | GPIO_PUEN);
gpio_set_value(ACFG_FPGA_PRG, 1);
gpio_set_value(ACFG_FPGA_RESET, 0);
imx_gpio_mode(ACFG_FPGA_RESET | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
return cookie;
}
void apf27_fpga_setup(void)
{
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
struct system_control_regs *system =
(struct system_control_regs *)IMX_SYSTEM_CTL_BASE;
/* Configure FPGA CLKO */
writel(ACFG_CCSR_VAL, &pll->ccsr);
/* Configure strentgh for FPGA */
writel(ACFG_DSCR10_VAL, &system->dscr10);
writel(ACFG_DSCR3_VAL, &system->dscr3);
writel(ACFG_DSCR7_VAL, &system->dscr7);
writel(ACFG_DSCR2_VAL, &system->dscr2);
}
/*
* Initialize the fpga. Return 1 on success, 0 on failure.
*/
void APF27_init_fpga(void)
{
int i;
apf27_fpga_setup();
fpga_init();
for (i = 0; i < CONFIG_FPGA_COUNT; i++) {
debug("%s:%d: Adding fpga %d\n", __func__, __LINE__, i);
fpga_add(fpga_xilinx, &fpga[i]);
}
return;
}