mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 17:38:51 +09:00
![Łukasz Majewski](/assets/img/avatar_default.png)
The PMIC framework has been extended to support multiple instances of the variety of devices responsible for power management. This change allows supporting of e.g. fuel gauge, charger, MUIC (Micro USB Interface Circuit). Power related includes have been moved to ./include/power directory. This is a first of a series of patches - in the future "pmic" will be replaced with "power". Two important issues: 1. The PMIC needs to be initialized just after malloc is configured 2. It uses list to hold information about available PMIC devices Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
407 lines
12 KiB
C
407 lines
12 KiB
C
/*
|
|
* (C) Copyright 2010 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/mx5x_pins.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/imx-common/boot_mode.h>
|
|
#include <netdev.h>
|
|
#include <i2c.h>
|
|
#include <mmc.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <power/pmic.h>
|
|
#include <fsl_pmic.h>
|
|
#include <asm/gpio.h>
|
|
#include <mc13892.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int dram_init(void)
|
|
{
|
|
/* dram_init must store complete ramsize in gd->ram_size */
|
|
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
|
|
PHYS_SDRAM_1_SIZE);
|
|
return 0;
|
|
}
|
|
|
|
static void setup_iomux_uart(void)
|
|
{
|
|
/* UART1 RXD */
|
|
mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_ALT2);
|
|
mxc_iomux_set_pad(MX53_PIN_CSI0_D11,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
|
|
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
|
mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x1);
|
|
|
|
/* UART1 TXD */
|
|
mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT2);
|
|
mxc_iomux_set_pad(MX53_PIN_CSI0_D10,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
|
|
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
|
}
|
|
|
|
static void setup_i2c(unsigned int port_number)
|
|
{
|
|
switch (port_number) {
|
|
case 0:
|
|
/* i2c1 SDA */
|
|
mxc_request_iomux(MX53_PIN_CSI0_D8,
|
|
IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
|
|
mxc_iomux_set_input(MX53_I2C1_IPP_SDA_IN_SELECT_INPUT,
|
|
INPUT_CTL_PATH0);
|
|
mxc_iomux_set_pad(MX53_PIN_CSI0_D8,
|
|
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
|
|
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
|
/* i2c1 SCL */
|
|
mxc_request_iomux(MX53_PIN_CSI0_D9,
|
|
IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
|
|
mxc_iomux_set_input(MX53_I2C1_IPP_SCL_IN_SELECT_INPUT,
|
|
INPUT_CTL_PATH0);
|
|
mxc_iomux_set_pad(MX53_PIN_CSI0_D9,
|
|
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
|
|
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
|
break;
|
|
case 1:
|
|
/* i2c2 SDA */
|
|
mxc_request_iomux(MX53_PIN_KEY_ROW3,
|
|
IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION);
|
|
mxc_iomux_set_input(MX53_I2C2_IPP_SDA_IN_SELECT_INPUT,
|
|
INPUT_CTL_PATH0);
|
|
mxc_iomux_set_pad(MX53_PIN_KEY_ROW3,
|
|
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
|
|
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
|
|
|
/* i2c2 SCL */
|
|
mxc_request_iomux(MX53_PIN_KEY_COL3,
|
|
IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION);
|
|
mxc_iomux_set_input(MX53_I2C2_IPP_SCL_IN_SELECT_INPUT,
|
|
INPUT_CTL_PATH0);
|
|
mxc_iomux_set_pad(MX53_PIN_KEY_COL3,
|
|
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE |
|
|
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
|
break;
|
|
default:
|
|
printf("Warning: Wrong I2C port number\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
void power_init(void)
|
|
{
|
|
unsigned int val;
|
|
struct pmic *p;
|
|
int ret;
|
|
|
|
ret = pmic_init(I2C_PMIC);
|
|
if (ret)
|
|
return;
|
|
|
|
p = pmic_get("FSL_PMIC");
|
|
if (!p)
|
|
return;
|
|
|
|
/* Set VDDA to 1.25V */
|
|
pmic_reg_read(p, REG_SW_2, &val);
|
|
val &= ~SWX_OUT_MASK;
|
|
val |= SWX_OUT_1_25;
|
|
pmic_reg_write(p, REG_SW_2, val);
|
|
|
|
/*
|
|
* Need increase VCC and VDDA to 1.3V
|
|
* according to MX53 IC TO2 datasheet.
|
|
*/
|
|
if (is_soc_rev(CHIP_REV_2_0) == 0) {
|
|
/* Set VCC to 1.3V for TO2 */
|
|
pmic_reg_read(p, REG_SW_1, &val);
|
|
val &= ~SWX_OUT_MASK;
|
|
val |= SWX_OUT_1_30;
|
|
pmic_reg_write(p, REG_SW_1, val);
|
|
|
|
/* Set VDDA to 1.3V for TO2 */
|
|
pmic_reg_read(p, REG_SW_2, &val);
|
|
val &= ~SWX_OUT_MASK;
|
|
val |= SWX_OUT_1_30;
|
|
pmic_reg_write(p, REG_SW_2, val);
|
|
}
|
|
}
|
|
|
|
static void setup_iomux_fec(void)
|
|
{
|
|
/*FEC_MDIO*/
|
|
mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_MDIO,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
|
mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1);
|
|
|
|
/*FEC_MDC*/
|
|
mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH);
|
|
|
|
/* FEC RXD1 */
|
|
mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_RXD1,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
|
|
|
|
/* FEC RXD0 */
|
|
mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_RXD0,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
|
|
|
|
/* FEC TXD1 */
|
|
mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH);
|
|
|
|
/* FEC TXD0 */
|
|
mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH);
|
|
|
|
/* FEC TX_EN */
|
|
mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH);
|
|
|
|
/* FEC TX_CLK */
|
|
mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
|
|
|
|
/* FEC RX_ER */
|
|
mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
|
|
|
|
/* FEC CRS */
|
|
mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
struct fsl_esdhc_cfg esdhc_cfg[2] = {
|
|
{MMC_SDHC1_BASE_ADDR},
|
|
{MMC_SDHC3_BASE_ADDR},
|
|
};
|
|
|
|
int board_mmc_getcd(struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
int ret;
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
|
|
gpio_direction_input(IMX_GPIO_NR(3, 11));
|
|
mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
|
|
gpio_direction_input(IMX_GPIO_NR(3, 13));
|
|
|
|
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
|
|
ret = !gpio_get_value(IMX_GPIO_NR(3, 13));
|
|
else
|
|
ret = !gpio_get_value(IMX_GPIO_NR(3, 11));
|
|
|
|
return ret;
|
|
}
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
u32 index;
|
|
s32 status = 0;
|
|
|
|
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
|
|
esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
|
|
|
|
for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
|
|
switch (index) {
|
|
case 0:
|
|
mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD1_DATA0,
|
|
IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD1_DATA1,
|
|
IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD1_DATA2,
|
|
IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD1_DATA3,
|
|
IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_EIM_DA13,
|
|
IOMUX_CONFIG_ALT1);
|
|
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_CMD,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_CLK,
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
|
|
PAD_CTL_DRV_HIGH);
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_DATA0,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_DATA1,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_DATA2,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_DATA3,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
break;
|
|
case 1:
|
|
mxc_request_iomux(MX53_PIN_ATA_RESET_B,
|
|
IOMUX_CONFIG_ALT2);
|
|
mxc_request_iomux(MX53_PIN_ATA_IORDY,
|
|
IOMUX_CONFIG_ALT2);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA8,
|
|
IOMUX_CONFIG_ALT4);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA9,
|
|
IOMUX_CONFIG_ALT4);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA10,
|
|
IOMUX_CONFIG_ALT4);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA11,
|
|
IOMUX_CONFIG_ALT4);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA0,
|
|
IOMUX_CONFIG_ALT4);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA1,
|
|
IOMUX_CONFIG_ALT4);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA2,
|
|
IOMUX_CONFIG_ALT4);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA3,
|
|
IOMUX_CONFIG_ALT4);
|
|
mxc_request_iomux(MX53_PIN_EIM_DA11,
|
|
IOMUX_CONFIG_ALT1);
|
|
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_RESET_B,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_IORDY,
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
|
|
PAD_CTL_DRV_HIGH);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA8,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA9,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA10,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA11,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA0,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA1,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA2,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA3,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
|
|
|
break;
|
|
default:
|
|
printf("Warning: you configured more ESDHC controller"
|
|
"(%d) as supported by the board(2)\n",
|
|
CONFIG_SYS_FSL_ESDHC_NUM);
|
|
return status;
|
|
}
|
|
status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
#endif
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
setup_iomux_uart();
|
|
setup_iomux_fec();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_CMD_BMODE
|
|
static const struct boot_mode board_boot_modes[] = {
|
|
/* 4 bit bus width */
|
|
{"mmc0", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)},
|
|
{"mmc1", MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)},
|
|
{NULL, 0},
|
|
};
|
|
#endif
|
|
|
|
int board_late_init(void)
|
|
{
|
|
setup_i2c(1);
|
|
power_init();
|
|
|
|
#ifdef CONFIG_CMD_BMODE
|
|
add_board_boot_modes(board_boot_modes);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: MX53EVK\n");
|
|
|
|
return 0;
|
|
}
|