mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 14:28:52 +09:00
![Marek Vasut](/assets/img/avatar_default.png)
The code in question polls an USB port status via USB_REQ_GET_STATUS to determine whether there is a device on the port or not. The way to figure that out is to check two bits. Those are wPortChange[0] and wPortStatus[0]. The wPortChange[0] indicates whether some kind of a connection status change happened on a port (a device was plugged or unplugged). The wPortStatus[0] bit indicates the status of the connection (plugged or unplugged). The current code tests whether wPortChange[0] == wPortStatus[0] and if that's the case, considers the loop polling for the presence of a USB device on port finished. This works for most USB sticks, since they come up really quickly and trigger the USB port change detection before the first iteration of the detection loop happens. Thus, both wPortChange[0] and wPortStatus[0] are set to 1 and thus equal. The loop is existed in it's first iteration and the stick is detected correctly. The problem is with some obscure USB sticks, which take some time before they pop up on the bus after the port was enabled. In this case, both the wPortChange[0] and wPortStatus[0] are 0. They are equal again, so the loop again exits in the first iteration, but this is incorrect, as such USB stick didn't have the opportunity to get detected on the bus. Rework the code such, that it checks for wPortChange[0] first to test if any connection change happened at all. If no change occured, keep polling. If a change did occur, test the wPortStatus[0] to see there is some device present on the port and only if this is the case, break out of the polling loop. This patch also trims down the duration of the polling loop from 10s per port to 1s per port. This is still annoyingly long, but there is no better option in case of U-Boot unfortunatelly. This change will most likely increase the duration of 'usb start' on some platforms, but this is needed to fix a bug. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Hans de Goede <hdegoede@redhat.com>
662 lines
18 KiB
C
662 lines
18 KiB
C
/*
|
|
* Most of this source has been derived from the Linux USB
|
|
* project:
|
|
* (C) Copyright Linus Torvalds 1999
|
|
* (C) Copyright Johannes Erdfelt 1999-2001
|
|
* (C) Copyright Andreas Gal 1999
|
|
* (C) Copyright Gregory P. Smith 1999
|
|
* (C) Copyright Deti Fliegl 1999 (new USB architecture)
|
|
* (C) Copyright Randy Dunlap 2000
|
|
* (C) Copyright David Brownell 2000 (kernel hotplug, usb_device_id)
|
|
* (C) Copyright Yggdrasil Computing, Inc. 2000
|
|
* (usb_device_id matching changes by Adam J. Richter)
|
|
*
|
|
* Adapted for U-Boot:
|
|
* (C) Copyright 2001 Denis Peter, MPL AG Switzerland
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/****************************************************************************
|
|
* HUB "Driver"
|
|
* Probes device for being a hub and configurate it
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/unaligned.h>
|
|
#include <linux/ctype.h>
|
|
#include <asm/byteorder.h>
|
|
#include <asm/unaligned.h>
|
|
#include <dm/root.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#include <usb.h>
|
|
#ifdef CONFIG_4xx
|
|
#include <asm/4xx_pci.h>
|
|
#endif
|
|
|
|
#define USB_BUFSIZ 512
|
|
|
|
/* TODO(sjg@chromium.org): Remove this when CONFIG_DM_USB is defined */
|
|
static struct usb_hub_device hub_dev[USB_MAX_HUB];
|
|
static int usb_hub_index;
|
|
|
|
__weak void usb_hub_reset_devices(int port)
|
|
{
|
|
return;
|
|
}
|
|
|
|
static int usb_get_hub_descriptor(struct usb_device *dev, void *data, int size)
|
|
{
|
|
return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
|
|
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
|
|
USB_DT_HUB << 8, 0, data, size, USB_CNTL_TIMEOUT);
|
|
}
|
|
|
|
static int usb_clear_port_feature(struct usb_device *dev, int port, int feature)
|
|
{
|
|
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
|
|
USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature,
|
|
port, NULL, 0, USB_CNTL_TIMEOUT);
|
|
}
|
|
|
|
static int usb_set_port_feature(struct usb_device *dev, int port, int feature)
|
|
{
|
|
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
|
|
USB_REQ_SET_FEATURE, USB_RT_PORT, feature,
|
|
port, NULL, 0, USB_CNTL_TIMEOUT);
|
|
}
|
|
|
|
static int usb_get_hub_status(struct usb_device *dev, void *data)
|
|
{
|
|
return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
|
|
USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
|
|
data, sizeof(struct usb_hub_status), USB_CNTL_TIMEOUT);
|
|
}
|
|
|
|
int usb_get_port_status(struct usb_device *dev, int port, void *data)
|
|
{
|
|
return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
|
|
USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port,
|
|
data, sizeof(struct usb_hub_status), USB_CNTL_TIMEOUT);
|
|
}
|
|
|
|
|
|
static void usb_hub_power_on(struct usb_hub_device *hub)
|
|
{
|
|
int i;
|
|
struct usb_device *dev;
|
|
unsigned pgood_delay = hub->desc.bPwrOn2PwrGood * 2;
|
|
const char *env;
|
|
|
|
dev = hub->pusb_dev;
|
|
|
|
debug("enabling power on all ports\n");
|
|
for (i = 0; i < dev->maxchild; i++) {
|
|
usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER);
|
|
debug("port %d returns %lX\n", i + 1, dev->status);
|
|
}
|
|
|
|
/*
|
|
* Wait for power to become stable,
|
|
* plus spec-defined max time for device to connect
|
|
* but allow this time to be increased via env variable as some
|
|
* devices break the spec and require longer warm-up times
|
|
*/
|
|
env = getenv("usb_pgood_delay");
|
|
if (env)
|
|
pgood_delay = max(pgood_delay,
|
|
(unsigned)simple_strtol(env, NULL, 0));
|
|
debug("pgood_delay=%dms\n", pgood_delay);
|
|
mdelay(pgood_delay + 1000);
|
|
}
|
|
|
|
void usb_hub_reset(void)
|
|
{
|
|
usb_hub_index = 0;
|
|
}
|
|
|
|
static struct usb_hub_device *usb_hub_allocate(void)
|
|
{
|
|
if (usb_hub_index < USB_MAX_HUB)
|
|
return &hub_dev[usb_hub_index++];
|
|
|
|
printf("ERROR: USB_MAX_HUB (%d) reached\n", USB_MAX_HUB);
|
|
return NULL;
|
|
}
|
|
|
|
#define MAX_TRIES 5
|
|
|
|
static inline char *portspeed(int portstatus)
|
|
{
|
|
char *speed_str;
|
|
|
|
switch (portstatus & USB_PORT_STAT_SPEED_MASK) {
|
|
case USB_PORT_STAT_SUPER_SPEED:
|
|
speed_str = "5 Gb/s";
|
|
break;
|
|
case USB_PORT_STAT_HIGH_SPEED:
|
|
speed_str = "480 Mb/s";
|
|
break;
|
|
case USB_PORT_STAT_LOW_SPEED:
|
|
speed_str = "1.5 Mb/s";
|
|
break;
|
|
default:
|
|
speed_str = "12 Mb/s";
|
|
break;
|
|
}
|
|
|
|
return speed_str;
|
|
}
|
|
|
|
int legacy_hub_port_reset(struct usb_device *dev, int port,
|
|
unsigned short *portstat)
|
|
{
|
|
int err, tries;
|
|
ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
|
|
unsigned short portstatus, portchange;
|
|
|
|
#ifdef CONFIG_DM_USB
|
|
debug("%s: resetting '%s' port %d...\n", __func__, dev->dev->name,
|
|
port + 1);
|
|
#else
|
|
debug("%s: resetting port %d...\n", __func__, port + 1);
|
|
#endif
|
|
for (tries = 0; tries < MAX_TRIES; tries++) {
|
|
err = usb_set_port_feature(dev, port + 1, USB_PORT_FEAT_RESET);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
mdelay(200);
|
|
|
|
if (usb_get_port_status(dev, port + 1, portsts) < 0) {
|
|
debug("get_port_status failed status %lX\n",
|
|
dev->status);
|
|
return -1;
|
|
}
|
|
portstatus = le16_to_cpu(portsts->wPortStatus);
|
|
portchange = le16_to_cpu(portsts->wPortChange);
|
|
|
|
debug("portstatus %x, change %x, %s\n", portstatus, portchange,
|
|
portspeed(portstatus));
|
|
|
|
debug("STAT_C_CONNECTION = %d STAT_CONNECTION = %d" \
|
|
" USB_PORT_STAT_ENABLE %d\n",
|
|
(portchange & USB_PORT_STAT_C_CONNECTION) ? 1 : 0,
|
|
(portstatus & USB_PORT_STAT_CONNECTION) ? 1 : 0,
|
|
(portstatus & USB_PORT_STAT_ENABLE) ? 1 : 0);
|
|
|
|
/*
|
|
* Perhaps we should check for the following here:
|
|
* - C_CONNECTION hasn't been set.
|
|
* - CONNECTION is still set.
|
|
*
|
|
* Doing so would ensure that the device is still connected
|
|
* to the bus, and hasn't been unplugged or replaced while the
|
|
* USB bus reset was going on.
|
|
*
|
|
* However, if we do that, then (at least) a San Disk Ultra
|
|
* USB 3.0 16GB device fails to reset on (at least) an NVIDIA
|
|
* Tegra Jetson TK1 board. For some reason, the device appears
|
|
* to briefly drop off the bus when this second bus reset is
|
|
* executed, yet if we retry this loop, it'll eventually come
|
|
* back after another reset or two.
|
|
*/
|
|
|
|
if (portstatus & USB_PORT_STAT_ENABLE)
|
|
break;
|
|
|
|
mdelay(200);
|
|
}
|
|
|
|
if (tries == MAX_TRIES) {
|
|
debug("Cannot enable port %i after %i retries, " \
|
|
"disabling port.\n", port + 1, MAX_TRIES);
|
|
debug("Maybe the USB cable is bad?\n");
|
|
return -1;
|
|
}
|
|
|
|
usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_RESET);
|
|
*portstat = portstatus;
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DM_USB
|
|
int hub_port_reset(struct udevice *dev, int port, unsigned short *portstat)
|
|
{
|
|
struct usb_device *udev = dev_get_parentdata(dev);
|
|
|
|
return legacy_hub_port_reset(udev, port, portstat);
|
|
}
|
|
#endif
|
|
|
|
int usb_hub_port_connect_change(struct usb_device *dev, int port)
|
|
{
|
|
ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
|
|
unsigned short portstatus;
|
|
int ret, speed;
|
|
|
|
/* Check status */
|
|
ret = usb_get_port_status(dev, port + 1, portsts);
|
|
if (ret < 0) {
|
|
debug("get_port_status failed\n");
|
|
return ret;
|
|
}
|
|
|
|
portstatus = le16_to_cpu(portsts->wPortStatus);
|
|
debug("portstatus %x, change %x, %s\n",
|
|
portstatus,
|
|
le16_to_cpu(portsts->wPortChange),
|
|
portspeed(portstatus));
|
|
|
|
/* Clear the connection change status */
|
|
usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_CONNECTION);
|
|
|
|
/* Disconnect any existing devices under this port */
|
|
if (((!(portstatus & USB_PORT_STAT_CONNECTION)) &&
|
|
(!(portstatus & USB_PORT_STAT_ENABLE))) ||
|
|
usb_device_has_child_on_port(dev, port)) {
|
|
debug("usb_disconnect(&hub->children[port]);\n");
|
|
/* Return now if nothing is connected */
|
|
if (!(portstatus & USB_PORT_STAT_CONNECTION))
|
|
return -ENOTCONN;
|
|
}
|
|
mdelay(200);
|
|
|
|
/* Reset the port */
|
|
ret = legacy_hub_port_reset(dev, port, &portstatus);
|
|
if (ret < 0) {
|
|
if (ret != -ENXIO)
|
|
printf("cannot reset port %i!?\n", port + 1);
|
|
return ret;
|
|
}
|
|
|
|
mdelay(200);
|
|
|
|
switch (portstatus & USB_PORT_STAT_SPEED_MASK) {
|
|
case USB_PORT_STAT_SUPER_SPEED:
|
|
speed = USB_SPEED_SUPER;
|
|
break;
|
|
case USB_PORT_STAT_HIGH_SPEED:
|
|
speed = USB_SPEED_HIGH;
|
|
break;
|
|
case USB_PORT_STAT_LOW_SPEED:
|
|
speed = USB_SPEED_LOW;
|
|
break;
|
|
default:
|
|
speed = USB_SPEED_FULL;
|
|
break;
|
|
}
|
|
|
|
#ifdef CONFIG_DM_USB
|
|
struct udevice *child;
|
|
|
|
ret = usb_scan_device(dev->dev, port + 1, speed, &child);
|
|
#else
|
|
struct usb_device *usb;
|
|
|
|
ret = usb_alloc_new_device(dev->controller, &usb);
|
|
if (ret) {
|
|
printf("cannot create new device: ret=%d", ret);
|
|
return ret;
|
|
}
|
|
|
|
dev->children[port] = usb;
|
|
usb->speed = speed;
|
|
usb->parent = dev;
|
|
usb->portnr = port + 1;
|
|
/* Run it through the hoops (find a driver, etc) */
|
|
ret = usb_new_device(usb);
|
|
if (ret < 0) {
|
|
/* Woops, disable the port */
|
|
usb_free_device(dev->controller);
|
|
dev->children[port] = NULL;
|
|
}
|
|
#endif
|
|
if (ret < 0) {
|
|
debug("hub: disabling port %d\n", port + 1);
|
|
usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_ENABLE);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int usb_hub_configure(struct usb_device *dev)
|
|
{
|
|
int i, length;
|
|
ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, USB_BUFSIZ);
|
|
unsigned char *bitmap;
|
|
short hubCharacteristics;
|
|
struct usb_hub_descriptor *descriptor;
|
|
struct usb_hub_device *hub;
|
|
__maybe_unused struct usb_hub_status *hubsts;
|
|
int ret;
|
|
|
|
/* "allocate" Hub device */
|
|
hub = usb_hub_allocate();
|
|
if (hub == NULL)
|
|
return -ENOMEM;
|
|
hub->pusb_dev = dev;
|
|
/* Get the the hub descriptor */
|
|
ret = usb_get_hub_descriptor(dev, buffer, 4);
|
|
if (ret < 0) {
|
|
debug("usb_hub_configure: failed to get hub " \
|
|
"descriptor, giving up %lX\n", dev->status);
|
|
return ret;
|
|
}
|
|
descriptor = (struct usb_hub_descriptor *)buffer;
|
|
|
|
length = min_t(int, descriptor->bLength,
|
|
sizeof(struct usb_hub_descriptor));
|
|
|
|
ret = usb_get_hub_descriptor(dev, buffer, length);
|
|
if (ret < 0) {
|
|
debug("usb_hub_configure: failed to get hub " \
|
|
"descriptor 2nd giving up %lX\n", dev->status);
|
|
return ret;
|
|
}
|
|
memcpy((unsigned char *)&hub->desc, buffer, length);
|
|
/* adjust 16bit values */
|
|
put_unaligned(le16_to_cpu(get_unaligned(
|
|
&descriptor->wHubCharacteristics)),
|
|
&hub->desc.wHubCharacteristics);
|
|
/* set the bitmap */
|
|
bitmap = (unsigned char *)&hub->desc.DeviceRemovable[0];
|
|
/* devices not removable by default */
|
|
memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8);
|
|
bitmap = (unsigned char *)&hub->desc.PortPowerCtrlMask[0];
|
|
memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8); /* PowerMask = 1B */
|
|
|
|
for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++)
|
|
hub->desc.DeviceRemovable[i] = descriptor->DeviceRemovable[i];
|
|
|
|
for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++)
|
|
hub->desc.PortPowerCtrlMask[i] = descriptor->PortPowerCtrlMask[i];
|
|
|
|
dev->maxchild = descriptor->bNbrPorts;
|
|
debug("%d ports detected\n", dev->maxchild);
|
|
|
|
hubCharacteristics = get_unaligned(&hub->desc.wHubCharacteristics);
|
|
switch (hubCharacteristics & HUB_CHAR_LPSM) {
|
|
case 0x00:
|
|
debug("ganged power switching\n");
|
|
break;
|
|
case 0x01:
|
|
debug("individual port power switching\n");
|
|
break;
|
|
case 0x02:
|
|
case 0x03:
|
|
debug("unknown reserved power switching mode\n");
|
|
break;
|
|
}
|
|
|
|
if (hubCharacteristics & HUB_CHAR_COMPOUND)
|
|
debug("part of a compound device\n");
|
|
else
|
|
debug("standalone hub\n");
|
|
|
|
switch (hubCharacteristics & HUB_CHAR_OCPM) {
|
|
case 0x00:
|
|
debug("global over-current protection\n");
|
|
break;
|
|
case 0x08:
|
|
debug("individual port over-current protection\n");
|
|
break;
|
|
case 0x10:
|
|
case 0x18:
|
|
debug("no over-current protection\n");
|
|
break;
|
|
}
|
|
|
|
debug("power on to power good time: %dms\n",
|
|
descriptor->bPwrOn2PwrGood * 2);
|
|
debug("hub controller current requirement: %dmA\n",
|
|
descriptor->bHubContrCurrent);
|
|
|
|
for (i = 0; i < dev->maxchild; i++)
|
|
debug("port %d is%s removable\n", i + 1,
|
|
hub->desc.DeviceRemovable[(i + 1) / 8] & \
|
|
(1 << ((i + 1) % 8)) ? " not" : "");
|
|
|
|
if (sizeof(struct usb_hub_status) > USB_BUFSIZ) {
|
|
debug("usb_hub_configure: failed to get Status - " \
|
|
"too long: %d\n", descriptor->bLength);
|
|
return -EFBIG;
|
|
}
|
|
|
|
ret = usb_get_hub_status(dev, buffer);
|
|
if (ret < 0) {
|
|
debug("usb_hub_configure: failed to get Status %lX\n",
|
|
dev->status);
|
|
return ret;
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
hubsts = (struct usb_hub_status *)buffer;
|
|
#endif
|
|
|
|
debug("get_hub_status returned status %X, change %X\n",
|
|
le16_to_cpu(hubsts->wHubStatus),
|
|
le16_to_cpu(hubsts->wHubChange));
|
|
debug("local power source is %s\n",
|
|
(le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? \
|
|
"lost (inactive)" : "good");
|
|
debug("%sover-current condition exists\n",
|
|
(le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? \
|
|
"" : "no ");
|
|
usb_hub_power_on(hub);
|
|
|
|
/*
|
|
* Reset any devices that may be in a bad state when applying
|
|
* the power. This is a __weak function. Resetting of the devices
|
|
* should occur in the board file of the device.
|
|
*/
|
|
for (i = 0; i < dev->maxchild; i++)
|
|
usb_hub_reset_devices(i + 1);
|
|
|
|
for (i = 0; i < dev->maxchild; i++) {
|
|
ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
|
|
unsigned short portstatus, portchange;
|
|
int ret;
|
|
ulong start = get_timer(0);
|
|
|
|
#ifdef CONFIG_DM_USB
|
|
debug("\n\nScanning '%s' port %d\n", dev->dev->name, i + 1);
|
|
#else
|
|
debug("\n\nScanning port %d\n", i + 1);
|
|
#endif
|
|
/*
|
|
* Wait for (whichever finishes first)
|
|
* - A maximum of 10 seconds
|
|
* This is a purely observational value driven by connecting
|
|
* a few broken pen drives and taking the max * 1.5 approach
|
|
* - connection_change and connection state to report same
|
|
* state
|
|
*/
|
|
do {
|
|
ret = usb_get_port_status(dev, i + 1, portsts);
|
|
if (ret < 0) {
|
|
debug("get_port_status failed\n");
|
|
break;
|
|
}
|
|
|
|
portstatus = le16_to_cpu(portsts->wPortStatus);
|
|
portchange = le16_to_cpu(portsts->wPortChange);
|
|
|
|
/* No connection change happened, wait a bit more. */
|
|
if (!(portchange & USB_PORT_STAT_C_CONNECTION))
|
|
continue;
|
|
|
|
/* Test if the connection came up, and if so, exit. */
|
|
if (portstatus & USB_PORT_STAT_CONNECTION)
|
|
break;
|
|
|
|
} while (get_timer(start) < CONFIG_SYS_HZ * 1);
|
|
|
|
if (ret < 0)
|
|
continue;
|
|
|
|
debug("Port %d Status %X Change %X\n",
|
|
i + 1, portstatus, portchange);
|
|
|
|
if (portchange & USB_PORT_STAT_C_CONNECTION) {
|
|
debug("port %d connection change\n", i + 1);
|
|
usb_hub_port_connect_change(dev, i);
|
|
}
|
|
if (portchange & USB_PORT_STAT_C_ENABLE) {
|
|
debug("port %d enable change, status %x\n",
|
|
i + 1, portstatus);
|
|
usb_clear_port_feature(dev, i + 1,
|
|
USB_PORT_FEAT_C_ENABLE);
|
|
/*
|
|
* The following hack causes a ghost device problem
|
|
* to Faraday EHCI
|
|
*/
|
|
#ifndef CONFIG_USB_EHCI_FARADAY
|
|
/* EM interference sometimes causes bad shielded USB
|
|
* devices to be shutdown by the hub, this hack enables
|
|
* them again. Works at least with mouse driver */
|
|
if (!(portstatus & USB_PORT_STAT_ENABLE) &&
|
|
(portstatus & USB_PORT_STAT_CONNECTION) &&
|
|
usb_device_has_child_on_port(dev, i)) {
|
|
debug("already running port %i " \
|
|
"disabled by hub (EMI?), " \
|
|
"re-enabling...\n", i + 1);
|
|
usb_hub_port_connect_change(dev, i);
|
|
}
|
|
#endif
|
|
}
|
|
if (portstatus & USB_PORT_STAT_SUSPEND) {
|
|
debug("port %d suspend change\n", i + 1);
|
|
usb_clear_port_feature(dev, i + 1,
|
|
USB_PORT_FEAT_SUSPEND);
|
|
}
|
|
|
|
if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
|
|
debug("port %d over-current change\n", i + 1);
|
|
usb_clear_port_feature(dev, i + 1,
|
|
USB_PORT_FEAT_C_OVER_CURRENT);
|
|
usb_hub_power_on(hub);
|
|
}
|
|
|
|
if (portchange & USB_PORT_STAT_C_RESET) {
|
|
debug("port %d reset change\n", i + 1);
|
|
usb_clear_port_feature(dev, i + 1,
|
|
USB_PORT_FEAT_C_RESET);
|
|
}
|
|
} /* end for i all ports */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int usb_hub_check(struct usb_device *dev, int ifnum)
|
|
{
|
|
struct usb_interface *iface;
|
|
struct usb_endpoint_descriptor *ep = NULL;
|
|
|
|
iface = &dev->config.if_desc[ifnum];
|
|
/* Is it a hub? */
|
|
if (iface->desc.bInterfaceClass != USB_CLASS_HUB)
|
|
goto err;
|
|
/* Some hubs have a subclass of 1, which AFAICT according to the */
|
|
/* specs is not defined, but it works */
|
|
if ((iface->desc.bInterfaceSubClass != 0) &&
|
|
(iface->desc.bInterfaceSubClass != 1))
|
|
goto err;
|
|
/* Multiple endpoints? What kind of mutant ninja-hub is this? */
|
|
if (iface->desc.bNumEndpoints != 1)
|
|
goto err;
|
|
ep = &iface->ep_desc[0];
|
|
/* Output endpoint? Curiousier and curiousier.. */
|
|
if (!(ep->bEndpointAddress & USB_DIR_IN))
|
|
goto err;
|
|
/* If it's not an interrupt endpoint, we'd better punt! */
|
|
if ((ep->bmAttributes & 3) != 3)
|
|
goto err;
|
|
/* We found a hub */
|
|
debug("USB hub found\n");
|
|
return 0;
|
|
|
|
err:
|
|
debug("USB hub not found: bInterfaceClass=%d, bInterfaceSubClass=%d, bNumEndpoints=%d\n",
|
|
iface->desc.bInterfaceClass, iface->desc.bInterfaceSubClass,
|
|
iface->desc.bNumEndpoints);
|
|
if (ep) {
|
|
debug(" bEndpointAddress=%#x, bmAttributes=%d",
|
|
ep->bEndpointAddress, ep->bmAttributes);
|
|
}
|
|
|
|
return -ENOENT;
|
|
}
|
|
|
|
int usb_hub_probe(struct usb_device *dev, int ifnum)
|
|
{
|
|
int ret;
|
|
|
|
ret = usb_hub_check(dev, ifnum);
|
|
if (ret)
|
|
return 0;
|
|
ret = usb_hub_configure(dev);
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_DM_USB
|
|
int usb_hub_scan(struct udevice *hub)
|
|
{
|
|
struct usb_device *udev = dev_get_parentdata(hub);
|
|
|
|
return usb_hub_configure(udev);
|
|
}
|
|
|
|
static int usb_hub_post_bind(struct udevice *dev)
|
|
{
|
|
/* Scan the bus for devices */
|
|
return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false);
|
|
}
|
|
|
|
static int usb_hub_post_probe(struct udevice *dev)
|
|
{
|
|
debug("%s\n", __func__);
|
|
return usb_hub_scan(dev);
|
|
}
|
|
|
|
static const struct udevice_id usb_hub_ids[] = {
|
|
{ .compatible = "usb-hub" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(usb_generic_hub) = {
|
|
.name = "usb_hub",
|
|
.id = UCLASS_USB_HUB,
|
|
.of_match = usb_hub_ids,
|
|
.flags = DM_FLAG_ALLOC_PRIV_DMA,
|
|
};
|
|
|
|
UCLASS_DRIVER(usb_hub) = {
|
|
.id = UCLASS_USB_HUB,
|
|
.name = "usb_hub",
|
|
.post_bind = usb_hub_post_bind,
|
|
.post_probe = usb_hub_post_probe,
|
|
.child_pre_probe = usb_child_pre_probe,
|
|
.per_child_auto_alloc_size = sizeof(struct usb_device),
|
|
.per_child_platdata_auto_alloc_size = sizeof(struct usb_dev_platdata),
|
|
};
|
|
|
|
static const struct usb_device_id hub_id_table[] = {
|
|
{
|
|
.match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
|
|
.bDeviceClass = USB_CLASS_HUB
|
|
},
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
U_BOOT_USB_DEVICE(usb_generic_hub, hub_id_table);
|
|
|
|
#endif
|