u-boot-brain/drivers/serial/serial_sh.c
Tetsuyuki Kobayashi 7c791b3f0a serial: serial_sh: bugfix: autoboot fails if serial console is not connected
On kzm9g board (rmobile SoC), autoboot fails if serial console cable is not
connected.  When serial cable is not connected, serial error occurs and
some garbage comes in data register.
sh_serial_tstc() in serial_sh.c does not check error status and misunderstand
there is some input data.  It is the reason that autoboot fails.
This patch adds checking error status in sh_serial_tstc().

This patch is based on v2013.01-rc1 tag of u-boot master git.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-11-30 15:06:05 +09:00

212 lines
4.7 KiB
C

/*
* SuperH SCIF device driver.
* Copyright (C) 2007,2008,2010 Nobuhiro Iwamatsu
* Copyright (C) 2002 - 2008 Paul Mundt
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/processor.h>
#include "serial_sh.h"
#include <serial.h>
#include <linux/compiler.h>
#if defined(CONFIG_CONS_SCIF0)
# define SCIF_BASE SCIF0_BASE
#elif defined(CONFIG_CONS_SCIF1)
# define SCIF_BASE SCIF1_BASE
#elif defined(CONFIG_CONS_SCIF2)
# define SCIF_BASE SCIF2_BASE
#elif defined(CONFIG_CONS_SCIF3)
# define SCIF_BASE SCIF3_BASE
#elif defined(CONFIG_CONS_SCIF4)
# define SCIF_BASE SCIF4_BASE
#elif defined(CONFIG_CONS_SCIF5)
# define SCIF_BASE SCIF5_BASE
#elif defined(CONFIG_CONS_SCIF6)
# define SCIF_BASE SCIF6_BASE
#elif defined(CONFIG_CONS_SCIF7)
# define SCIF_BASE SCIF7_BASE
#else
# error "Default SCIF doesn't set....."
#endif
#if defined(CONFIG_SCIF_A)
#define SCIF_BASE_PORT PORT_SCIFA
#else
#define SCIF_BASE_PORT PORT_SCIF
#endif
static struct uart_port sh_sci = {
.membase = (unsigned char*)SCIF_BASE,
.mapbase = SCIF_BASE,
.type = SCIF_BASE_PORT,
};
static void sh_serial_setbrg(void)
{
DECLARE_GLOBAL_DATA_PTR;
sci_out(&sh_sci, SCBRR, SCBRR_VALUE(gd->baudrate, CONFIG_SYS_CLK_FREQ));
}
static int sh_serial_init(void)
{
sci_out(&sh_sci, SCSCR , SCSCR_INIT(&sh_sci));
sci_out(&sh_sci, SCSCR , SCSCR_INIT(&sh_sci));
sci_out(&sh_sci, SCSMR, 0);
sci_out(&sh_sci, SCSMR, 0);
sci_out(&sh_sci, SCFCR, SCFCR_RFRST|SCFCR_TFRST);
sci_in(&sh_sci, SCFCR);
sci_out(&sh_sci, SCFCR, 0);
serial_setbrg();
return 0;
}
#if defined(CONFIG_CPU_SH7760) || \
defined(CONFIG_CPU_SH7780) || \
defined(CONFIG_CPU_SH7785) || \
defined(CONFIG_CPU_SH7786)
static int scif_rxfill(struct uart_port *port)
{
return sci_in(port, SCRFDR) & 0xff;
}
#elif defined(CONFIG_CPU_SH7763)
static int scif_rxfill(struct uart_port *port)
{
if ((port->mapbase == 0xffe00000) ||
(port->mapbase == 0xffe08000)) {
/* SCIF0/1*/
return sci_in(port, SCRFDR) & 0xff;
} else {
/* SCIF2 */
return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
}
}
#elif defined(CONFIG_ARCH_SH7372)
static int scif_rxfill(struct uart_port *port)
{
if (port->type == PORT_SCIFA)
return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
else
return sci_in(port, SCRFDR);
}
#else
static int scif_rxfill(struct uart_port *port)
{
return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
}
#endif
static int serial_rx_fifo_level(void)
{
return scif_rxfill(&sh_sci);
}
static void handle_error(void)
{
sci_in(&sh_sci, SCxSR);
sci_out(&sh_sci, SCxSR, SCxSR_ERROR_CLEAR(&sh_sci));
sci_in(&sh_sci, SCLSR);
sci_out(&sh_sci, SCLSR, 0x00);
}
void serial_raw_putc(const char c)
{
while (1) {
/* Tx fifo is empty */
if (sci_in(&sh_sci, SCxSR) & SCxSR_TEND(&sh_sci))
break;
}
sci_out(&sh_sci, SCxTDR, c);
sci_out(&sh_sci, SCxSR, sci_in(&sh_sci, SCxSR) & ~SCxSR_TEND(&sh_sci));
}
static void sh_serial_putc(const char c)
{
if (c == '\n')
serial_raw_putc('\r');
serial_raw_putc(c);
}
static int sh_serial_tstc(void)
{
if (sci_in(&sh_sci, SCxSR) & SCIF_ERRORS) {
handle_error();
return 0;
}
return serial_rx_fifo_level() ? 1 : 0;
}
int serial_getc_check(void)
{
unsigned short status;
status = sci_in(&sh_sci, SCxSR);
if (status & SCIF_ERRORS)
handle_error();
if (sci_in(&sh_sci, SCLSR) & SCxSR_ORER(&sh_sci))
handle_error();
return status & (SCIF_DR | SCxSR_RDxF(&sh_sci));
}
static int sh_serial_getc(void)
{
unsigned short status;
char ch;
while (!serial_getc_check())
;
ch = sci_in(&sh_sci, SCxRDR);
status = sci_in(&sh_sci, SCxSR);
sci_out(&sh_sci, SCxSR, SCxSR_RDxF_CLEAR(&sh_sci));
if (status & SCIF_ERRORS)
handle_error();
if (sci_in(&sh_sci, SCLSR) & SCxSR_ORER(&sh_sci))
handle_error();
return ch;
}
static struct serial_device sh_serial_drv = {
.name = "sh_serial",
.start = sh_serial_init,
.stop = NULL,
.setbrg = sh_serial_setbrg,
.putc = sh_serial_putc,
.puts = default_serial_puts,
.getc = sh_serial_getc,
.tstc = sh_serial_tstc,
};
void sh_serial_initialize(void)
{
serial_register(&sh_serial_drv);
}
__weak struct serial_device *default_serial_console(void)
{
return &sh_serial_drv;
}