brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-07-22 19:09:43 +09:00
Code Issues Projects Releases Wiki Activity
7bb75023a7
u-boot-brain/drivers/mtd/nand/raw
History
Christophe Kerello 7bb75023a7 mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver 
The driver adds the support for the STMicroelectronics FMC2 NAND
Controller found on STM32MP SOCs.

This patch adds the polling mode, a basic mode that do not need
any DMA channels.

Only NAND_ECC_HW mode is actually supported.
The driver supports a maximum 8k page size.
The following ECC strength and step size are currently supported:
 - nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8)
 - nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4)
 - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Extended ECC
   based on Hamming)

This patch has been tested on Micron MT29F8G08ABACAH4.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
2019-04-12 16:09:13 +02:00
..
am335x_spl_bch.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
arasan_nfc.c mtd: nand: arasan_nfc: Add support for nand multi chip select 2019-01-24 10:03:42 +01:00
atmel_nand_ecc.h mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
atmel_nand.c nand: atmel: Initialize pmecc smu with correct size 2018-10-22 09:18:49 -04:00
davinci_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
denali_dt.c mtd: rawnand: denali: optimize timing parameters for data interface 2018-12-29 11:38:37 +09:00
denali_spl.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
denali.c mtd: rawnand: denali: fix a race condition when DMA is kicked 2018-12-29 11:38:37 +09:00
denali.h mtd: rawnand: denali: optimize timing parameters for data interface 2018-12-29 11:38:37 +09:00
fsl_elbc_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
fsl_elbc_spl.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
fsl_ifc_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
fsl_ifc_spl.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
fsl_upm.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
fsmc_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
kb9202_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
Kconfig mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver 2019-04-12 16:09:13 +02:00
kirkwood_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
kmeter1_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
lpc32xx_nand_mlc.c mtd: nand: lpc32xx mlc: predefine number of NAND chips to support 2018-11-16 13:34:36 -05:00
lpc32xx_nand_slc.c mtd: nand: lpc32xx slc: disable DMA support in SPL builds 2018-11-16 13:34:37 -05:00
Makefile mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver 2019-04-12 16:09:13 +02:00
mxc_nand_spl.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
mxc_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
mxc_nand.h mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
mxs_nand_dt.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
mxs_nand_spl.c MTD: mxs_nand_spl: Redo the way nand_init initializes 2019-03-13 09:14:35 +01:00
mxs_nand.c MTD: nand: mxs_nand: Allow driver to auto setup ECC in SPL 2019-02-15 12:42:13 +01:00
mxs_nand.h mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_base.c mtd: nand: raw: allow to disable unneeded ECC layouts 2019-01-16 16:14:45 -05:00
nand_bbt.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_bch.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_ecc.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_ids.c mtd: nand: raw: Add Hynix H27UBG8T2BTR id table 2019-01-02 00:58:16 +05:30
nand_plat.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_spl_load.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_spl_loaders.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_spl_simple.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_timings.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_util.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
omap_elm.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
omap_gpmc.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
pxa3xx_nand.c mtd: rawnand: pxa3xx: fix 2kiB pages with 8b strength chips layout 2018-11-22 11:38:13 +05:30
pxa3xx_nand.h mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
stm32_fmc2_nand.c mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver 2019-04-12 16:09:13 +02:00
sunxi_nand_spl.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
sunxi_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
tegra_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
tegra_nand.h mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
vf610_nfc.c nand: vybrid: Extend the vf610 NFC NAND driver to support device tree (and DM) 2019-01-01 14:12:18 +01:00
zynq_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30