u-boot-brain/doc/board/freescale/imx8mm_evk.rst
Peng Fan a505fd3cc6 doc: imx8mm_evk: update doc after using binman
Update doc after switch to binman to pack images

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 20:29:53 +02:00

58 lines
1.2 KiB
ReStructuredText

.. SPDX-License-Identifier: GPL-2.0+
imx8mm_evk
==========
U-Boot for the NXP i.MX8MM EVK board
Quick Start
-----------
- Build the ARM Trusted firmware binary
- Get ddr firmware
- Build U-Boot
- Boot
Get and Build the ARM Trusted firmware
--------------------------------------
Note: builddir is U-Boot build directory (source directory for in-tree builds)
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
branch: imx_5.4.47_2.2.0
.. code-block:: bash
$ make PLAT=imx8mm bl31
$ cp build/imx8mm/release/bl31.bin $(builddir)
Get the ddr firmware
--------------------
.. code-block:: bash
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
$ chmod +x firmware-imx-8.9.bin
$ ./firmware-imx-8.9
$ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
Build U-Boot
------------
.. code-block:: bash
$ export CROSS_COMPILE=aarch64-poky-linux-
$ make imx8mm_evk_defconfig
$ export ATF_LOAD_ADDR=0x920000
$ make
Burn the flash.bin to MicroSD card offset 33KB:
.. code-block:: bash
$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=notrunc
$sudo dd if=u-boot.itb of=/dev/sdc bs=1024 seek=384 conv=sync
Boot
----
Set Boot switch to SD boot