u-boot-brain/drivers/misc/ns87308.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

101 lines
2.7 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2000
* Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
*/
#include <config.h>
#include <ns87308.h>
void initialise_ns87308 (void)
{
#ifdef CONFIG_SYS_NS87308_PS2MOD
unsigned char data;
/*
* Switch floppy drive to PS/2 mode.
*/
read_pnp_config(SUPOERIO_CONF1, &data);
data &= 0xFB;
write_pnp_config(SUPOERIO_CONF1, data);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_KBC1)
PNP_SET_DEVICE_BASE(LDEV_KBC1, CONFIG_SYS_NS87308_KBC1_BASE);
write_pnp_config(LUN_CONFIG_REG, 0);
write_pnp_config(CBASE_HIGH, 0x00);
write_pnp_config(CBASE_LOW, 0x64);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_MOUSE)
PNP_ACTIVATE_DEVICE(LDEV_MOUSE);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_RTC_APC)
PNP_SET_DEVICE_BASE(LDEV_RTC_APC, CONFIG_SYS_NS87308_RTC_BASE);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_FDC)
PNP_SET_DEVICE_BASE(LDEV_FDC, CONFIG_SYS_NS87308_FDC_BASE);
write_pnp_config(LUN_CONFIG_REG, 0x40);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_RARP)
PNP_SET_DEVICE_BASE(LDEV_PARP, CONFIG_SYS_NS87308_LPT_BASE);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_UART1)
PNP_SET_DEVICE_BASE(LDEV_UART1, CONFIG_SYS_NS87308_UART1_BASE);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_UART2)
PNP_SET_DEVICE_BASE(LDEV_UART2, CONFIG_SYS_NS87308_UART2_BASE);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_GPIO)
PNP_SET_DEVICE_BASE(LDEV_GPIO, CONFIG_SYS_NS87308_GPIO_BASE);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_POWRMAN)
#ifndef CONFIG_SYS_NS87308_PWMAN_BASE
PNP_ACTIVATE_DEVICE(LDEV_POWRMAN);
#else
PNP_SET_DEVICE_BASE(LDEV_POWRMAN, CONFIG_SYS_NS87308_PWMAN_BASE);
/*
* Enable all units
*/
write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_FER1, 0x7d);
write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_FER2, 0x87);
#ifdef CONFIG_SYS_NS87308_PMC1
write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC1, CONFIG_SYS_NS87308_PMC1);
#endif
#ifdef CONFIG_SYS_NS87308_PMC2
write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC2, CONFIG_SYS_NS87308_PMC2);
#endif
#ifdef CONFIG_SYS_NS87308_PMC3
write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC3, CONFIG_SYS_NS87308_PMC3);
#endif
#endif
#endif
#ifdef CONFIG_SYS_NS87308_CS0_BASE
PNP_PGCS_CSLINE_BASE(0, CONFIG_SYS_NS87308_CS0_BASE);
PNP_PGCS_CSLINE_CONF(0, CONFIG_SYS_NS87308_CS0_CONF);
#endif
#ifdef CONFIG_SYS_NS87308_CS1_BASE
PNP_PGCS_CSLINE_BASE(1, CONFIG_SYS_NS87308_CS1_BASE);
PNP_PGCS_CSLINE_CONF(1, CONFIG_SYS_NS87308_CS1_CONF);
#endif
#ifdef CONFIG_SYS_NS87308_CS2_BASE
PNP_PGCS_CSLINE_BASE(2, CONFIG_SYS_NS87308_CS2_BASE);
PNP_PGCS_CSLINE_CONF(2, CONFIG_SYS_NS87308_CS2_CONF);
#endif
}