u-boot-brain/board/keymile/scripts
Gerlando Falauto 7b2268b88f arm/km: enable FDT for km_kirwkood
This consists of:
a) Defining the addresses, enabling fdtsupport [arm]
b) Defining "cramfsloadfdt"  [arm,powerpc => common]
c) Adding the FDT address to bootm [arm,powerpc => common]
d) Defining "tftpfdt" in ramfs-,develop- [arm,powerpc >= common]

This should work with 3.10 kernels, whether loaded through TFTP
(with rootfs either through NFS or TFTP-ramfs) or from the NAND.

The machid was left unchanged, this should keep compatibility with both
older and newer kernels.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Acked-by: Valentin Longchamp <valentin.longchamp@keymile.com>
2014-02-13 16:17:54 +01:00
..
develop-arm.txt arm/km: enable FDT for km_kirwkood 2014-02-13 16:17:54 +01:00
develop-common.txt arm/km: enable FDT for km_kirwkood 2014-02-13 16:17:54 +01:00
develop-ppc_8xx.txt arm/km: enable FDT for km_kirwkood 2014-02-13 16:17:54 +01:00
develop-ppc_82xx.txt arm/km: enable FDT for km_kirwkood 2014-02-13 16:17:54 +01:00
ramfs-arm.txt arm/km: enable FDT for km_kirwkood 2014-02-13 16:17:54 +01:00
ramfs-common.txt arm/km: enable FDT for km_kirwkood 2014-02-13 16:17:54 +01:00
ramfs-ppc_8xx.txt arm/km: enable FDT for km_kirwkood 2014-02-13 16:17:54 +01:00
ramfs-ppc_82xx.txt arm/km: enable FDT for km_kirwkood 2014-02-13 16:17:54 +01:00
README km/common: add toolchain variable 2011-12-20 23:43:45 +01:00

These scripts are needed for our development usecases. Copy this directory
into your tftp root directory to be able to use this scripts.
cp -r <u-boot-repo>/board/keymile/scripts <your_tftp_root>/

To load and configure these usecase, two environment variables in the u-boot
default environment must be parsed:
run develop : setup environment to configure for rootfs via nfs
run ramfs   : setup environment to configure for rootfs in ram

Last change: 24.11.2011

develop-common.txt
============================
This file defines variables for working with rootfs via nfs for powerpc and
arm.

develop-<arch>.txt
============================
This file defines architecture specific variables for working with rootfs via
nfs arm.


ramfs-common.txt
============================
This file defines variables for working with rootfs inside the ram for powerpc
and arm.

ramfs-<arch>.txt
============================
This file defines architecture specific variables for working with rootfs inside
ram.