mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Nobuhiro Iwamatsu](/assets/img/avatar_default.png)
AP325RXA is SH7723's reference board. This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other. In this patch, support SCIF, NOR Flash, and Ethernet. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
207 lines
5.1 KiB
C
207 lines
5.1 KiB
C
/***************************************************************
|
|
* Project:
|
|
* CPLD SlaveSerial Configuration via embedded microprocessor.
|
|
*
|
|
* Copyright info:
|
|
*
|
|
* This is free software; you can redistribute it and/or modify
|
|
* it as you like.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
*
|
|
* Description:
|
|
*
|
|
* This is the main source file that will allow a microprocessor
|
|
* to configure Xilinx Virtex, Virtex-E, Virtex-EM, Virtex-II,
|
|
* and Spartan-II devices via the SlaveSerial Configuration Mode.
|
|
* This code is discussed in Xilinx Application Note, XAPP502.
|
|
*
|
|
* History:
|
|
* 3-October-2001 MN/MP - Created
|
|
* 20-August-2008 Renesas Solutions - Modified to SH7723
|
|
****************************************************************/
|
|
|
|
#include <common.h>
|
|
|
|
/* Serial */
|
|
#define SCIF_BASE 0xffe00000 /* SCIF0 */
|
|
#define SCSMR (vu_short *)(SCIF_BASE + 0x00)
|
|
#define SCBRR (vu_char *)(SCIF_BASE + 0x04)
|
|
#define SCSCR (vu_short *)(SCIF_BASE + 0x08)
|
|
#define SC_TDR (vu_char *)(SCIF_BASE + 0x0C)
|
|
#define SC_SR (vu_short *)(SCIF_BASE + 0x10)
|
|
#define SCFCR (vu_short *)(SCIF_BASE + 0x18)
|
|
#define RFCR (vu_long *)0xFE400020
|
|
|
|
#define SCSCR_INIT 0x0038
|
|
#define SCSCR_CLR 0x0000
|
|
#define SCFCR_INIT 0x0006
|
|
#define SCSMR_INIT 0x0080
|
|
#define RFCR_CLR 0xA400
|
|
#define SCI_TD_E 0x0020
|
|
#define SCI_TDRE_CLEAR 0x00df
|
|
|
|
#define BPS_SETTING_VALUE 1 /* 12.5MHz */
|
|
#define WAIT_RFCR_COUNTER 500
|
|
|
|
/* CPLD data size */
|
|
#define CPLD_DATA_SIZE 169216
|
|
|
|
/* out */
|
|
#define CPLD_PFC_ADR ((vu_short *)0xA4050112)
|
|
|
|
#define CPLD_PROG_ADR ((vu_char *)0xA4050132)
|
|
#define CPLD_PROG_DAT 0x80
|
|
|
|
/* in */
|
|
#define CPLD_INIT_ADR ((vu_char *)0xA4050132)
|
|
#define CPLD_INIT_DAT 0x40
|
|
#define CPLD_DONE_ADR ((vu_char *)0xA4050132)
|
|
#define CPLD_DONE_DAT 0x20
|
|
|
|
#define HIZCRB ((vu_short *)0xA405015A)
|
|
|
|
/* data */
|
|
#define CPLD_NOMAL_START 0xA0A80000
|
|
#define CPLD_SAFE_START 0xA0AC0000
|
|
#define MODE_SW (vu_char *)0xA405012A
|
|
|
|
static void init_cpld_loader(void)
|
|
{
|
|
|
|
*SCSCR = SCSCR_CLR;
|
|
*SCFCR = SCFCR_INIT;
|
|
*SCSMR = SCSMR_INIT;
|
|
|
|
*SCBRR = BPS_SETTING_VALUE;
|
|
|
|
*RFCR = RFCR_CLR; /* Refresh counter clear */
|
|
|
|
while (*RFCR < WAIT_RFCR_COUNTER)
|
|
;
|
|
|
|
*SCFCR = 0x0; /* RTRG=00, TTRG=00 */
|
|
/* MCE=0,TFRST=0,RFRST=0,LOOP=0 */
|
|
*SCSCR = SCSCR_INIT;
|
|
}
|
|
|
|
static int check_write_ready(void)
|
|
{
|
|
u16 status = *SC_SR;
|
|
return status & SCI_TD_E;
|
|
}
|
|
|
|
static void write_cpld_data(char ch)
|
|
{
|
|
while (!check_write_ready())
|
|
;
|
|
|
|
*SC_TDR = ch;
|
|
*SC_SR;
|
|
*SC_SR = SCI_TDRE_CLEAR;
|
|
}
|
|
|
|
static int delay(void)
|
|
{
|
|
int i;
|
|
int c = 0;
|
|
for (i = 0; i < 200; i++) {
|
|
c = *(volatile int *)0xa0000000;
|
|
}
|
|
return c;
|
|
}
|
|
|
|
/***********************************************************************
|
|
*
|
|
* Function: slave_serial
|
|
*
|
|
* Description: Initiates SlaveSerial Configuration.
|
|
* Calls ShiftDataOut() to output serial data
|
|
*
|
|
***********************************************************************/
|
|
static void slave_serial(void)
|
|
{
|
|
int i;
|
|
unsigned char *flash;
|
|
|
|
*CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */
|
|
delay();
|
|
|
|
/*
|
|
* Toggle Program Pin by Toggling Program_OE bit
|
|
* This is accomplished by writing to the Program Register in the CPLD
|
|
*
|
|
* NOTE: The Program_OE bit should be driven high to bring the Virtex
|
|
* Program Pin low. Likewise, it should be driven low
|
|
* to bring the Virtex Program Pin to High-Z
|
|
*/
|
|
|
|
*CPLD_PROG_ADR &= ~CPLD_PROG_DAT; /* PROGRAM_OE LOW */
|
|
delay();
|
|
|
|
/*
|
|
* Bring Program High-Z
|
|
* (Drive Program_OE bit low to bring Virtex Program Pin to High-Z
|
|
*/
|
|
|
|
/* Program_OE bit Low brings the Virtex Program Pin to High Z: */
|
|
*CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */
|
|
|
|
while ((*CPLD_INIT_ADR & CPLD_INIT_DAT) == 0)
|
|
delay();
|
|
|
|
/* Begin Slave-Serial Configuration */
|
|
flash = (unsigned char *)CPLD_NOMAL_START;
|
|
|
|
for (i = 0; i < CPLD_DATA_SIZE; i++)
|
|
write_cpld_data(*flash++);
|
|
}
|
|
|
|
/***********************************************************************
|
|
*
|
|
* Function: check_done_bit
|
|
*
|
|
* Description: This function takes monitors the CPLD Input Register
|
|
* by checking the status of the DONE bit in that Register.
|
|
* By doing so, it monitors the Xilinx Virtex device's DONE
|
|
* Pin to see if configuration bitstream has been properly
|
|
* loaded
|
|
*
|
|
***********************************************************************/
|
|
static void check_done_bit(void)
|
|
{
|
|
while (!(*CPLD_DONE_ADR & CPLD_DONE_DAT))
|
|
;
|
|
}
|
|
|
|
/***********************************************************************
|
|
*
|
|
* Function: init_cpld
|
|
*
|
|
* Description: Begins Slave Serial configuration of Xilinx FPGA
|
|
*
|
|
***********************************************************************/
|
|
void init_cpld(void)
|
|
{
|
|
/* Init serial device */
|
|
init_cpld_loader();
|
|
|
|
if (*CPLD_DONE_ADR & CPLD_DONE_DAT) /* Already DONE */
|
|
return;
|
|
|
|
*HIZCRB = 0x0000;
|
|
*CPLD_PFC_ADR = 0x7c00; /* FPGA PROG = OUTPUT */
|
|
|
|
/* write CPLD data from NOR flash to device */
|
|
slave_serial();
|
|
|
|
/*
|
|
* Monitor the DONE bit in the CPLD Input Register to see if
|
|
* configuration successful
|
|
*/
|
|
|
|
check_done_bit();
|
|
}
|