brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-07-05 18:56:15 +09:00
Code Issues Projects Releases Wiki Activity
7a946961c7
u-boot-brain/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
York Sun 4108508a96 powerpc/85xx: Add workaround for erratum A-003474 
Erratum A-003474: Internal DDR calibration circuit is not supported

Impact:
Experience shows no significant benefit to device operation with
auto-calibration enabled versus it disabled. To ensure consistent timing
results, Freescale recommends this feature be disabled in future customer
products. There should be no impact to parts that are already operating
in the field.

Workaround:
Prior to setting DDR_SDRAM_CFG[MEM_EN]=1, do the following:
1. Write a value of 0x0000_0015 to the register at offset
	CCSRBAR + DDR OFFSET + 0xf30
2. Write a value of 0x2400_0000 to the register at offset
	CCSRBAR + DDR OFFSET + 0xf54

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-29 08:48:06 -06:00

359 lines
11 KiB
C
Raw Blame History

/*
* Copyright 2008-2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* Version 2 as published by the Free Software Foundation.
*/
#include <common.h>
#include <asm/io.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/processor.h>
#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
#endif
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num)
{
unsigned int i;
volatile ccsr_ddr_t *ddr;
u32 temp_sdram_cfg;
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR;
u32 total_gb_size_per_controller;
unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t;
int csn = -1;
#endif
switch (ctrl_num) {
case 0:
ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
break;
case 1:
ddr = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
break;
default:
printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
return;
}
out_be32(&ddr->eor, regs->ddr_eor);
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
cs_sa = (regs->cs[i].bnds >> 16) & 0xfff;
cs_ea = regs->cs[i].bnds & 0xfff;
if ((cs_sa <= 0xff) && (cs_ea >= 0xff)) {
csn = i;
csn_bnds_backup = regs->cs[i].bnds;
csn_bnds_t = (unsigned int *) &regs->cs[i].bnds;
*csn_bnds_t = regs->cs[i].bnds ^ 0x0F000F00;
debug("Found cs%d_bns (0x%08x) covering 0xff000000, "
"change it to 0x%x\n",
csn, csn_bnds_backup, regs->cs[i].bnds);
break;
}
}
#endif
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
if (i == 0) {
out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
out_be32(&ddr->cs0_config, regs->cs[i].config);
out_be32(&ddr->cs0_config_2, regs->cs[i].config_2);
} else if (i == 1) {
out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
out_be32(&ddr->cs1_config, regs->cs[i].config);
out_be32(&ddr->cs1_config_2, regs->cs[i].config_2);
} else if (i == 2) {
out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
out_be32(&ddr->cs2_config, regs->cs[i].config);
out_be32(&ddr->cs2_config_2, regs->cs[i].config_2);
} else if (i == 3) {
out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
out_be32(&ddr->cs3_config, regs->cs[i].config);
out_be32(&ddr->cs3_config_2, regs->cs[i].config_2);
}
}
out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
out_be32(&ddr->sdram_mode_4, regs->ddr_sdram_mode_4);
out_be32(&ddr->sdram_mode_5, regs->ddr_sdram_mode_5);
out_be32(&ddr->sdram_mode_6, regs->ddr_sdram_mode_6);
out_be32(&ddr->sdram_mode_7, regs->ddr_sdram_mode_7);
out_be32(&ddr->sdram_mode_8, regs->ddr_sdram_mode_8);
out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
out_be32(&ddr->init_addr, regs->ddr_init_addr);
out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1);
out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
out_be32(&ddr->err_disable, regs->err_disable);
out_be32(&ddr->err_int_en, regs->err_int_en);
for (i = 0; i < 32; i++)
out_be32(&ddr->debug[i], regs->debug[i]);
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474
out_be32(&ddr->debug[12], 0x00000015);
out_be32(&ddr->debug[21], 0x24000000);
#endif /* CONFIG_SYS_FSL_ERRATUM_DDR_A003474 */
/* Set, but do not enable the memory */
temp_sdram_cfg = regs->ddr_sdram_cfg;
temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003
if (regs->ddr_sdram_rcw_2 & 0x00f00000) {
out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2 & 0xf07fffff);
out_be32(&ddr->debug[2], 0x00000400);
out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl & 0x7fffffff);
out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl & 0x7fffffff);
out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2 & 0xffffffeb);
out_be32(&ddr->mtcr, 0);
out_be32(&ddr->debug[12], 0x00000015);
out_be32(&ddr->debug[21], 0x24000000);
out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval & 0xffff);
out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_BI | SDRAM_CFG_MEM_EN);
asm volatile("sync;isync");
while (!(in_be32(&ddr->debug[1]) & 0x2))
;
switch (regs->ddr_sdram_rcw_2 & 0x00f00000) {
case 0x00000000:
out_be32(&ddr->sdram_md_cntl,
MD_CNTL_MD_EN |
MD_CNTL_CS_SEL_CS0_CS1 |
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x02));
break;
case 0x00100000:
out_be32(&ddr->sdram_md_cntl,
MD_CNTL_MD_EN |
MD_CNTL_CS_SEL_CS0_CS1 |
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x0a));
break;
case 0x00200000:
out_be32(&ddr->sdram_md_cntl,
MD_CNTL_MD_EN |
MD_CNTL_CS_SEL_CS0_CS1 |
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x12));
break;
case 0x00300000:
out_be32(&ddr->sdram_md_cntl,
MD_CNTL_MD_EN |
MD_CNTL_CS_SEL_CS0_CS1 |
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x1a));
break;
default:
out_be32(&ddr->sdram_md_cntl,
MD_CNTL_MD_EN |
MD_CNTL_CS_SEL_CS0_CS1 |
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x02));
printf("Unsupported RC10\n");
break;
}
while (in_be32(&ddr->sdram_md_cntl) & 0x80000000)
;
udelay(6);
out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
out_be32(&ddr->debug[2], 0x0);
out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
out_be32(&ddr->debug[12], 0x0);
out_be32(&ddr->debug[21], 0x0);
out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
}
#endif
/*
* For 8572 DDR1 erratum - DDR controller may enter illegal state
* when operatiing in 32-bit bus mode with 4-beat bursts,
* This erratum does not affect DDR3 mode, only for DDR2 mode.
*/
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_115
if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2)
&& in_be32(&ddr->sdram_cfg) & 0x80000) {
/* set DEBUG_1[31] */
setbits_be32(&ddr->debug[0], 1);
}
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
/*
* This is the combined workaround for DDR111 and DDR134
* following the published errata for MPC8572
*/
/* 1. Set EEBACR[3] */
setbits_be32(&ecm->eebacr, 0x10000000);
debug("Setting EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
/* 2. Set DINIT in SDRAM_CFG_2*/
setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_D_INIT);
debug("Setting sdram_cfg_2[D_INIT] to 0x%08x\n",
in_be32(&ddr->sdram_cfg_2));
/* 3. Set DEBUG_3[21] */
setbits_be32(&ddr->debug[2], 0x400);
debug("Setting DEBUG_3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
#endif /* part 1 of the workaound */
/*
* 500 painful micro-seconds must elapse between
* the DDR clock setup and the DDR config enable.
* DDR2 need 200 us, and DDR3 need 500 us from spec,
* we choose the max, that is 500 us for all of case.
*/
udelay(500);
asm volatile("sync;isync");
/* Let the controller go */
temp_sdram_cfg = in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
asm volatile("sync;isync");
/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
udelay(10000); /* throttle polling rate */
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
/* continue this workaround */
/* 4. Clear DEBUG3[21] */
clrbits_be32(&ddr->debug[2], 0x400);
debug("Clearing D3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
/* DDR134 workaround starts */
/* A: Clear sdram_cfg_2[odt_cfg] */
clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_ODT_CFG_MASK);
debug("Clearing SDRAM_CFG2[ODT_CFG] to 0x%08x\n",
in_be32(&ddr->sdram_cfg_2));
/* B: Set DEBUG1[15] */
setbits_be32(&ddr->debug[0], 0x10000);
debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
/* C: Set timing_cfg_2[cpo] to 0b11111 */
setbits_be32(&ddr->timing_cfg_2, TIMING_CFG_2_CPO_MASK);
debug("Setting TMING_CFG_2[CPO] to 0x%08x\n",
in_be32(&ddr->timing_cfg_2));
/* D: Set D6 to 0x9f9f9f9f */
out_be32(&ddr->debug[5], 0x9f9f9f9f);
debug("Setting D6 to 0x%08x\n", in_be32(&ddr->debug[5]));
/* E: Set D7 to 0x9f9f9f9f */
out_be32(&ddr->debug[6], 0x9f9f9f9f);
debug("Setting D7 to 0x%08x\n", in_be32(&ddr->debug[6]));
/* F: Set D2[20] */
setbits_be32(&ddr->debug[1], 0x800);
debug("Setting D2[20] to 0x%08x\n", in_be32(&ddr->debug[1]));
/* G: Poll on D2[20] until cleared */
while (in_be32(&ddr->debug[1]) & 0x800)
udelay(10000); /* throttle polling rate */
/* H: Clear D1[15] */
clrbits_be32(&ddr->debug[0], 0x10000);
debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
/* I: Set sdram_cfg_2[odt_cfg] */
setbits_be32(&ddr->sdram_cfg_2,
regs->ddr_sdram_cfg_2 & SDRAM_CFG2_ODT_CFG_MASK);
debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
/* Continuing with the DDR111 workaround */
/* 5. Set D2[21] */
setbits_be32(&ddr->debug[1], 0x400);
debug("Setting D2[21] to 0x%08x\n", in_be32(&ddr->debug[1]));
/* 6. Poll D2[21] until its cleared */
while (in_be32(&ddr->debug[1]) & 0x400)
udelay(10000); /* throttle polling rate */
/* 7. Wait for 400ms/GB */
total_gb_size_per_controller = 0;
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
total_gb_size_per_controller +=
((regs->cs[i].bnds & 0xFFFF) >> 6)
- (regs->cs[i].bnds >> 22) + 1;
}
if (in_be32(&ddr->sdram_cfg) & 0x80000)
total_gb_size_per_controller <<= 1;
debug("Wait for %d ms\n", total_gb_size_per_controller * 400);
udelay(total_gb_size_per_controller * 400000);
/* 8. Set sdram_cfg_2[dinit] if options requires */
setbits_be32(&ddr->sdram_cfg_2,
regs->ddr_sdram_cfg_2 & SDRAM_CFG2_D_INIT);
debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
/* 9. Poll until dinit is cleared */
while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
udelay(10000);
/* 10. Clear EEBACR[3] */
clrbits_be32(&ecm->eebacr, 10000000);
debug("Clearing EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
if (csn != -1) {
csn_bnds_t = (unsigned int *) &regs->cs[csn].bnds;
*csn_bnds_t = csn_bnds_backup;
debug("Change cs%d_bnds back to 0x%08x\n",
csn, regs->cs[csn].bnds);
setbits_be32(&ddr->sdram_cfg, 0x2); /* MEM_HALT */
switch (csn) {
case 0:
out_be32(&ddr->cs0_bnds, regs->cs[csn].bnds);
break;
case 1:
out_be32(&ddr->cs1_bnds, regs->cs[csn].bnds);
break;
case 2:
out_be32(&ddr->cs2_bnds, regs->cs[csn].bnds);
break;
case 3:
out_be32(&ddr->cs3_bnds, regs->cs[csn].bnds);
break;
}
clrbits_be32(&ddr->sdram_cfg, 0x2);
}
#endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */
}
Reference in New Issue View Git Blame Copy Permalink