mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
349 lines
9.8 KiB
C
349 lines
9.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2013
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <log.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/ahb.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/flow.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/arch/tegra.h>
|
|
#include <asm/arch-tegra/clk_rst.h>
|
|
#include <asm/arch-tegra/pmc.h>
|
|
#include <asm/arch-tegra/ap.h>
|
|
#include <linux/delay.h>
|
|
#include "../cpu.h"
|
|
|
|
/* Tegra124-specific CPU init code */
|
|
|
|
static void enable_cpu_power_rail(void)
|
|
{
|
|
struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
|
|
|
|
debug("%s entry\n", __func__);
|
|
|
|
/* un-tristate PWR_I2C SCL/SDA, rest of the defaults are correct */
|
|
pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SCL_PZ6);
|
|
pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SDA_PZ7);
|
|
|
|
pmic_enable_cpu_vdd();
|
|
|
|
/*
|
|
* Set CPUPWRGOOD_TIMER - APB clock is 1/2 of SCLK (102MHz),
|
|
* set it for 5ms as per SysEng (102MHz*5ms = 510000 (7C830h).
|
|
*/
|
|
writel(0x7C830, &pmc->pmc_cpupwrgood_timer);
|
|
|
|
/* Set polarity to 0 (normal) and enable CPUPWRREQ_OE */
|
|
clrbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_POL);
|
|
setbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_OE);
|
|
}
|
|
|
|
static void enable_cpu_clocks(void)
|
|
{
|
|
struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
struct clk_pll_info *pllinfo = &tegra_pll_info_table[CLOCK_ID_XCPU];
|
|
u32 reg;
|
|
|
|
debug("%s entry\n", __func__);
|
|
|
|
/* Wait for PLL-X to lock */
|
|
do {
|
|
reg = readl(&clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
|
|
debug("%s: PLLX base = 0x%08X\n", __func__, reg);
|
|
} while ((reg & (1 << pllinfo->lock_det)) == 0);
|
|
|
|
debug("%s: PLLX locked, delay for stable clocks\n", __func__);
|
|
/* Wait until all clocks are stable */
|
|
udelay(PLL_STABILIZATION_DELAY);
|
|
|
|
debug("%s: Setting CCLK_BURST and DIVIDER\n", __func__);
|
|
writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
|
|
writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div);
|
|
|
|
debug("%s: Enabling clock to all CPUs\n", __func__);
|
|
/* Enable the clock to all CPUs */
|
|
reg = CLR_CPU3_CLK_STP | CLR_CPU2_CLK_STP | CLR_CPU1_CLK_STP |
|
|
CLR_CPU0_CLK_STP;
|
|
writel(reg, &clkrst->crc_clk_cpu_cmplx_clr);
|
|
|
|
debug("%s: Enabling main CPU complex clocks\n", __func__);
|
|
/* Always enable the main CPU complex clocks */
|
|
clock_enable(PERIPH_ID_CPU);
|
|
clock_enable(PERIPH_ID_CPULP);
|
|
clock_enable(PERIPH_ID_CPUG);
|
|
|
|
debug("%s: Done\n", __func__);
|
|
}
|
|
|
|
static void remove_cpu_resets(void)
|
|
{
|
|
struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
u32 reg;
|
|
|
|
debug("%s entry\n", __func__);
|
|
|
|
/* Take the slow and fast partitions out of reset */
|
|
reg = CLR_NONCPURESET;
|
|
writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr);
|
|
writel(reg, &clkrst->crc_rst_cpug_cmplx_clr);
|
|
|
|
/* Clear the SW-controlled reset of the slow cluster */
|
|
reg = CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 |
|
|
CLR_L2RESET | CLR_PRESETDBG;
|
|
writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr);
|
|
|
|
/* Clear the SW-controlled reset of the fast cluster */
|
|
reg = CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 |
|
|
CLR_CPURESET1 | CLR_DBGRESET1 | CLR_CORERESET1 | CLR_CXRESET1 |
|
|
CLR_CPURESET2 | CLR_DBGRESET2 | CLR_CORERESET2 | CLR_CXRESET2 |
|
|
CLR_CPURESET3 | CLR_DBGRESET3 | CLR_CORERESET3 | CLR_CXRESET3 |
|
|
CLR_L2RESET | CLR_PRESETDBG;
|
|
writel(reg, &clkrst->crc_rst_cpug_cmplx_clr);
|
|
}
|
|
|
|
static void tegra124_ram_repair(void)
|
|
{
|
|
struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
|
|
u32 ram_repair_timeout; /*usec*/
|
|
u32 val;
|
|
|
|
/*
|
|
* Request the Flow Controller perform RAM repair whenever it turns on
|
|
* a power rail that requires RAM repair.
|
|
*/
|
|
clrbits_le32(&flow->ram_repair, RAM_REPAIR_BYPASS_EN);
|
|
|
|
/* Request SW trigerred RAM repair by setting req bit */
|
|
/* cluster 0 */
|
|
setbits_le32(&flow->ram_repair, RAM_REPAIR_REQ);
|
|
/* Wait for completion (status == 0) */
|
|
ram_repair_timeout = 500;
|
|
do {
|
|
udelay(1);
|
|
val = readl(&flow->ram_repair);
|
|
} while (!(val & RAM_REPAIR_STS) && ram_repair_timeout--);
|
|
if (!ram_repair_timeout)
|
|
debug("Ram Repair cluster0 failed\n");
|
|
|
|
/* cluster 1 */
|
|
setbits_le32(&flow->ram_repair_cluster1, RAM_REPAIR_REQ);
|
|
/* Wait for completion (status == 0) */
|
|
ram_repair_timeout = 500;
|
|
do {
|
|
udelay(1);
|
|
val = readl(&flow->ram_repair_cluster1);
|
|
} while (!(val & RAM_REPAIR_STS) && ram_repair_timeout--);
|
|
|
|
if (!ram_repair_timeout)
|
|
debug("Ram Repair cluster1 failed\n");
|
|
}
|
|
|
|
/**
|
|
* Tegra124 requires some special clock initialization, including setting up
|
|
* the DVC I2C, turning on MSELECT and selecting the G CPU cluster
|
|
*/
|
|
void tegra124_init_clocks(void)
|
|
{
|
|
struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
|
|
struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
|
|
struct clk_rst_ctlr *clkrst =
|
|
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
u32 val;
|
|
|
|
debug("%s entry\n", __func__);
|
|
|
|
/* Set active CPU cluster to G */
|
|
clrbits_le32(&flow->cluster_control, 1);
|
|
|
|
/* Change the oscillator drive strength */
|
|
val = readl(&clkrst->crc_osc_ctrl);
|
|
val &= ~OSC_XOFS_MASK;
|
|
val |= (OSC_DRIVE_STRENGTH << OSC_XOFS_SHIFT);
|
|
writel(val, &clkrst->crc_osc_ctrl);
|
|
|
|
/* Update same value in PMC_OSC_EDPD_OVER XOFS field for warmboot */
|
|
val = readl(&pmc->pmc_osc_edpd_over);
|
|
val &= ~PMC_XOFS_MASK;
|
|
val |= (OSC_DRIVE_STRENGTH << PMC_XOFS_SHIFT);
|
|
writel(val, &pmc->pmc_osc_edpd_over);
|
|
|
|
/* Set HOLD_CKE_LOW_EN to 1 */
|
|
setbits_le32(&pmc->pmc_cntrl2, HOLD_CKE_LOW_EN);
|
|
|
|
debug("Setting up PLLX\n");
|
|
init_pllx();
|
|
|
|
val = (1 << CLK_SYS_RATE_AHB_RATE_SHIFT);
|
|
writel(val, &clkrst->crc_clk_sys_rate);
|
|
|
|
/* Enable clocks to required peripherals. TBD - minimize this list */
|
|
debug("Enabling clocks\n");
|
|
|
|
clock_set_enable(PERIPH_ID_CACHE2, 1);
|
|
clock_set_enable(PERIPH_ID_GPIO, 1);
|
|
clock_set_enable(PERIPH_ID_TMR, 1);
|
|
clock_set_enable(PERIPH_ID_CPU, 1);
|
|
clock_set_enable(PERIPH_ID_EMC, 1);
|
|
clock_set_enable(PERIPH_ID_I2C5, 1);
|
|
clock_set_enable(PERIPH_ID_APBDMA, 1);
|
|
clock_set_enable(PERIPH_ID_MEM, 1);
|
|
clock_set_enable(PERIPH_ID_CORESIGHT, 1);
|
|
clock_set_enable(PERIPH_ID_MSELECT, 1);
|
|
clock_set_enable(PERIPH_ID_DVFS, 1);
|
|
|
|
/*
|
|
* Set MSELECT clock source as PLLP (00), and ask for a clock
|
|
* divider that would set the MSELECT clock at 102MHz for a
|
|
* PLLP base of 408MHz.
|
|
*/
|
|
clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0,
|
|
CLK_DIVIDER(NVBL_PLLP_KHZ, 102000));
|
|
|
|
/* Give clock time to stabilize */
|
|
udelay(IO_STABILIZATION_DELAY);
|
|
|
|
/* I2C5 (DVC) gets CLK_M and a divisor of 17 */
|
|
clock_ll_set_source_divisor(PERIPH_ID_I2C5, 3, 16);
|
|
|
|
/* Give clock time to stabilize */
|
|
udelay(IO_STABILIZATION_DELAY);
|
|
|
|
/* Take required peripherals out of reset */
|
|
debug("Taking periphs out of reset\n");
|
|
reset_set_enable(PERIPH_ID_CACHE2, 0);
|
|
reset_set_enable(PERIPH_ID_GPIO, 0);
|
|
reset_set_enable(PERIPH_ID_TMR, 0);
|
|
reset_set_enable(PERIPH_ID_COP, 0);
|
|
reset_set_enable(PERIPH_ID_EMC, 0);
|
|
reset_set_enable(PERIPH_ID_I2C5, 0);
|
|
reset_set_enable(PERIPH_ID_APBDMA, 0);
|
|
reset_set_enable(PERIPH_ID_MEM, 0);
|
|
reset_set_enable(PERIPH_ID_CORESIGHT, 0);
|
|
reset_set_enable(PERIPH_ID_MSELECT, 0);
|
|
reset_set_enable(PERIPH_ID_DVFS, 0);
|
|
|
|
debug("%s exit\n", __func__);
|
|
}
|
|
|
|
static bool is_partition_powered(u32 partid)
|
|
{
|
|
struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
|
|
u32 reg;
|
|
|
|
/* Get power gate status */
|
|
reg = readl(&pmc->pmc_pwrgate_status);
|
|
return !!(reg & (1 << partid));
|
|
}
|
|
|
|
static void unpower_partition(u32 partid)
|
|
{
|
|
struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
|
|
|
|
debug("%s: part ID = %08X\n", __func__, partid);
|
|
/* Is the partition on? */
|
|
if (is_partition_powered(partid)) {
|
|
/* Yes, toggle the partition power state (ON -> OFF) */
|
|
debug("power_partition, toggling state\n");
|
|
writel(START_CP | partid, &pmc->pmc_pwrgate_toggle);
|
|
|
|
/* Wait for the power to come down */
|
|
while (is_partition_powered(partid))
|
|
;
|
|
|
|
/* Give I/O signals time to stabilize */
|
|
udelay(IO_STABILIZATION_DELAY);
|
|
}
|
|
}
|
|
|
|
void unpower_cpus(void)
|
|
{
|
|
debug("%s entry: G cluster\n", __func__);
|
|
|
|
/* Power down the fast cluster rail partition */
|
|
debug("%s: CRAIL\n", __func__);
|
|
unpower_partition(CRAIL);
|
|
|
|
/* Power down the fast cluster non-CPU partition */
|
|
debug("%s: C0NC\n", __func__);
|
|
unpower_partition(C0NC);
|
|
|
|
/* Power down the fast cluster CPU0 partition */
|
|
debug("%s: CE0\n", __func__);
|
|
unpower_partition(CE0);
|
|
|
|
debug("%s: done\n", __func__);
|
|
}
|
|
|
|
static void power_partition(u32 partid)
|
|
{
|
|
struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
|
|
|
|
debug("%s: part ID = %08X\n", __func__, partid);
|
|
/* Is the partition already on? */
|
|
if (!is_partition_powered(partid)) {
|
|
/* No, toggle the partition power state (OFF -> ON) */
|
|
debug("power_partition, toggling state\n");
|
|
writel(START_CP | partid, &pmc->pmc_pwrgate_toggle);
|
|
|
|
/* Wait for the power to come up */
|
|
while (!is_partition_powered(partid))
|
|
;
|
|
|
|
/* Give I/O signals time to stabilize */
|
|
udelay(IO_STABILIZATION_DELAY);
|
|
}
|
|
}
|
|
|
|
void powerup_cpus(void)
|
|
{
|
|
/* We boot to the fast cluster */
|
|
debug("%s entry: G cluster\n", __func__);
|
|
|
|
/* Power up the fast cluster rail partition */
|
|
debug("%s: CRAIL\n", __func__);
|
|
power_partition(CRAIL);
|
|
|
|
/* Power up the fast cluster non-CPU partition */
|
|
debug("%s: C0NC\n", __func__);
|
|
power_partition(C0NC);
|
|
|
|
/* Power up the fast cluster CPU0 partition */
|
|
debug("%s: CE0\n", __func__);
|
|
power_partition(CE0);
|
|
|
|
debug("%s: done\n", __func__);
|
|
}
|
|
|
|
void start_cpu(u32 reset_vector)
|
|
{
|
|
struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
|
|
|
|
debug("%s entry, reset_vector = %x\n", __func__, reset_vector);
|
|
|
|
/*
|
|
* High power clusters are on after software reset,
|
|
* it may interfere with tegra124_ram_repair.
|
|
* unpower them.
|
|
*/
|
|
unpower_cpus();
|
|
tegra124_init_clocks();
|
|
|
|
/* Set power-gating timer multiplier */
|
|
writel((MULT_8 << TIMER_MULT_SHIFT) | (MULT_8 << TIMER_MULT_CPU_SHIFT),
|
|
&pmc->pmc_pwrgate_timer_mult);
|
|
|
|
enable_cpu_power_rail();
|
|
powerup_cpus();
|
|
tegra124_ram_repair();
|
|
enable_cpu_clocks();
|
|
clock_enable_coresight(1);
|
|
writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
|
|
remove_cpu_resets();
|
|
debug("%s exit, should continue @ reset_vector\n", __func__);
|
|
}
|