mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 09:58:52 +09:00
![]() This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
||
---|---|---|
.. | ||
a3000.c | ||
config.mk | ||
flash.c | ||
Makefile | ||
README |
U-Boot for Artis SBC-A3000 --------------------------- Artis SBC-A3000 has one flash socket that the user uses Intel 28F128J3A (16MB) or 28F064J3A (8MB) chips. In board's notation, bank 0 is the one at the address of 0xFF000000. bank 1 is the one at the address of 0xFF800000 On power-up the processor jumps to the address of 0xFFF00100, the last megabyte of the bank 0 of flash. Thus, U-Boot is configured to reside in flash starting at the address of 0xFFF00000. The environment space is located in flash separately from U-Boot, at the address of 0xFFFE0000. There is a National ns83815 10/100M ethernet controller on-board.