u-boot-brain/drivers/usb/eth/usb_ether.c
Simon Glass 7616e78508 Add Ethernet hardware MAC address framework to usbnet
Built-in Ethernet adapters support setting the mac address by means of a
ethaddr environment variable for each interface (ethaddr, eth1addr, eth2addr).

This adds similar support to the USB network side, using the names
usbethaddr, usbeth1addr, etc. They are kept separate since we don't want
a USB device taking the MAC address of a built-in device or vice versa.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Eric Bénard <eric@eukrea.com>
2011-08-08 21:05:23 +02:00

162 lines
4.3 KiB
C

/*
* Copyright (c) 2011 The Chromium OS Authors.
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <usb.h>
#include "usb_ether.h"
typedef void (*usb_eth_before_probe)(void);
typedef int (*usb_eth_probe)(struct usb_device *dev, unsigned int ifnum,
struct ueth_data *ss);
typedef int (*usb_eth_get_info)(struct usb_device *dev, struct ueth_data *ss,
struct eth_device *dev_desc);
struct usb_eth_prob_dev {
usb_eth_before_probe before_probe; /* optional */
usb_eth_probe probe;
usb_eth_get_info get_info;
};
/* driver functions go here, each bracketed by #ifdef CONFIG_USB_ETHER_xxx */
static const struct usb_eth_prob_dev prob_dev[] = {
#ifdef CONFIG_USB_ETHER_ASIX
{
.before_probe = asix_eth_before_probe,
.probe = asix_eth_probe,
.get_info = asix_eth_get_info,
},
#endif
#ifdef CONFIG_USB_ETHER_SMSC95XX
{
.before_probe = smsc95xx_eth_before_probe,
.probe = smsc95xx_eth_probe,
.get_info = smsc95xx_eth_get_info,
},
#endif
{ }, /* END */
};
static int usb_max_eth_dev; /* number of highest available usb eth device */
static struct ueth_data usb_eth[USB_MAX_ETH_DEV];
/*******************************************************************************
* tell if current ethernet device is a usb dongle
*/
int is_eth_dev_on_usb_host(void)
{
int i;
struct eth_device *dev = eth_get_dev();
if (dev) {
for (i = 0; i < usb_max_eth_dev; i++)
if (&usb_eth[i].eth_dev == dev)
return 1;
}
return 0;
}
/*
* Given a USB device, ask each driver if it can support it, and attach it
* to the first driver that says 'yes'
*/
static void probe_valid_drivers(struct usb_device *dev)
{
struct eth_device *eth;
int j;
for (j = 0; prob_dev[j].probe && prob_dev[j].get_info; j++) {
if (!prob_dev[j].probe(dev, 0, &usb_eth[usb_max_eth_dev]))
continue;
/*
* ok, it is a supported eth device. Get info and fill it in
*/
eth = &usb_eth[usb_max_eth_dev].eth_dev;
if (prob_dev[j].get_info(dev,
&usb_eth[usb_max_eth_dev],
eth)) {
/* found proper driver */
/* register with networking stack */
usb_max_eth_dev++;
/*
* usb_max_eth_dev must be incremented prior to this
* call since eth_current_changed (internally called)
* relies on it
*/
eth_register(eth);
if (eth_write_hwaddr(eth, "usbeth",
usb_max_eth_dev - 1))
puts("Warning: failed to set MAC address\n");
break;
}
}
}
/*******************************************************************************
* scan the usb and reports device info
* to the user if mode = 1
* returns current device or -1 if no
*/
int usb_host_eth_scan(int mode)
{
int i, old_async;
struct usb_device *dev;
if (mode == 1)
printf(" scanning bus for ethernet devices... ");
old_async = usb_disable_asynch(1); /* asynch transfer not allowed */
for (i = 0; i < USB_MAX_ETH_DEV; i++)
memset(&usb_eth[i], 0, sizeof(usb_eth[i]));
for (i = 0; prob_dev[i].probe; i++) {
if (prob_dev[i].before_probe)
prob_dev[i].before_probe();
}
usb_max_eth_dev = 0;
for (i = 0; i < USB_MAX_DEVICE; i++) {
dev = usb_get_dev_index(i); /* get device */
debug("i=%d\n", i);
if (dev == NULL)
break; /* no more devices avaiable */
/* find valid usb_ether driver for this device, if any */
probe_valid_drivers(dev);
/* check limit */
if (usb_max_eth_dev == USB_MAX_ETH_DEV) {
printf("max USB Ethernet Device reached: %d stopping\n",
usb_max_eth_dev);
break;
}
} /* for */
usb_disable_asynch(old_async); /* restore asynch value */
printf("%d Ethernet Device(s) found\n", usb_max_eth_dev);
if (usb_max_eth_dev > 0)
return 0;
return -1;
}