mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 01:18:52 +09:00
![wdenk](/assets/img/avatar_default.png)
- Added I2C support for ML300. - Added support for ML300 to read out its environment information stored on the EEPROM. - Added support to use board specific parameters as part of U-Boot's environment information. - Updated MLD files to support configuration for new features above. * Patches by Travis Sawyer, 5 Aug 2004: - Remove incorrect bridge settings for eth group 6 - Add call to setup bridge in ppc_440x_eth_initialize - Fix ppc_440x_eth_init to reset the phy only if its the first time through, otherwise, just check the phy for the autonegotiated speed/duplex. This allows the use of netconsole - only print the speed/duplex the first time the phy is reset.
151 lines
6.0 KiB
C
151 lines
6.0 KiB
C
/* $Id: xiic_l.h,v 1.2 2002/12/05 19:32:40 meinelte Exp $ */
|
|
/*****************************************************************************
|
|
*
|
|
* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
|
|
* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
|
|
* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
|
|
* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
|
|
* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
|
|
* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
|
|
* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
|
|
* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
|
|
* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
|
|
* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
|
|
* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
|
|
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE.
|
|
*
|
|
* (c) Copyright 2002 Xilinx Inc.
|
|
* All rights reserved.
|
|
*
|
|
*****************************************************************************/
|
|
/****************************************************************************/
|
|
/**
|
|
*
|
|
* @file xiic_l.h
|
|
*
|
|
* This header file contains identifiers and low-level driver functions (or
|
|
* macros) that can be used to access the device. High-level driver functions
|
|
* are defined in xiic.h.
|
|
*
|
|
* <pre>
|
|
* MODIFICATION HISTORY:
|
|
*
|
|
* Ver Who Date Changes
|
|
* ----- ---- -------- -----------------------------------------------
|
|
* 1.00b jhl 05/07/02 First release
|
|
* 1.01c ecm 12/05/02 new rev
|
|
* </pre>
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#ifndef XIIC_L_H /* prevent circular inclusions */
|
|
#define XIIC_L_H /* by using protection macros */
|
|
|
|
/***************************** Include Files ********************************/
|
|
|
|
#include "xbasic_types.h"
|
|
|
|
/************************** Constant Definitions ****************************/
|
|
|
|
#define XIIC_MSB_OFFSET 3
|
|
|
|
#define XIIC_REG_OFFSET 0x100 + XIIC_MSB_OFFSET
|
|
|
|
/*
|
|
* Register offsets in bytes from RegisterBase. Three is added to the
|
|
* base offset to access LSB (IBM style) of the word
|
|
*/
|
|
#define XIIC_CR_REG_OFFSET 0x00+XIIC_REG_OFFSET /* Control Register */
|
|
#define XIIC_SR_REG_OFFSET 0x04+XIIC_REG_OFFSET /* Status Register */
|
|
#define XIIC_DTR_REG_OFFSET 0x08+XIIC_REG_OFFSET /* Data Tx Register */
|
|
#define XIIC_DRR_REG_OFFSET 0x0C+XIIC_REG_OFFSET /* Data Rx Register */
|
|
#define XIIC_ADR_REG_OFFSET 0x10+XIIC_REG_OFFSET /* Address Register */
|
|
#define XIIC_TFO_REG_OFFSET 0x14+XIIC_REG_OFFSET /* Tx FIFO Occupancy */
|
|
#define XIIC_RFO_REG_OFFSET 0x18+XIIC_REG_OFFSET /* Rx FIFO Occupancy */
|
|
#define XIIC_TBA_REG_OFFSET 0x1C+XIIC_REG_OFFSET /* 10 Bit Address reg */
|
|
#define XIIC_RFD_REG_OFFSET 0x20+XIIC_REG_OFFSET /* Rx FIFO Depth reg */
|
|
|
|
/* Control Register masks */
|
|
|
|
#define XIIC_CR_ENABLE_DEVICE_MASK 0x01 /* Device enable = 1 */
|
|
#define XIIC_CR_TX_FIFO_RESET_MASK 0x02 /* Transmit FIFO reset=1 */
|
|
#define XIIC_CR_MSMS_MASK 0x04 /* Master starts Txing=1 */
|
|
#define XIIC_CR_DIR_IS_TX_MASK 0x08 /* Dir of tx. Txing=1 */
|
|
#define XIIC_CR_NO_ACK_MASK 0x10 /* Tx Ack. NO ack = 1 */
|
|
#define XIIC_CR_REPEATED_START_MASK 0x20 /* Repeated start = 1 */
|
|
#define XIIC_CR_GENERAL_CALL_MASK 0x40 /* Gen Call enabled = 1 */
|
|
|
|
/* Status Register masks */
|
|
|
|
#define XIIC_SR_GEN_CALL_MASK 0x01 /* 1=a mstr issued a GC */
|
|
#define XIIC_SR_ADDR_AS_SLAVE_MASK 0x02 /* 1=when addr as slave */
|
|
#define XIIC_SR_BUS_BUSY_MASK 0x04 /* 1 = bus is busy */
|
|
#define XIIC_SR_MSTR_RDING_SLAVE_MASK 0x08 /* 1=Dir: mstr <-- slave */
|
|
#define XIIC_SR_TX_FIFO_FULL_MASK 0x10 /* 1 = Tx FIFO full */
|
|
#define XIIC_SR_RX_FIFO_FULL_MASK 0x20 /* 1 = Rx FIFO full */
|
|
#define XIIC_SR_RX_FIFO_EMPTY_MASK 0x40 /* 1 = Rx FIFO empty */
|
|
|
|
/* IPIF Interrupt Status Register masks Interrupt occurs when... */
|
|
|
|
#define XIIC_INTR_ARB_LOST_MASK 0x01 /* 1 = arbitration lost */
|
|
#define XIIC_INTR_TX_ERROR_MASK 0x02 /* 1=Tx error/msg complete*/
|
|
#define XIIC_INTR_TX_EMPTY_MASK 0x04 /* 1 = Tx FIFO/reg empty */
|
|
#define XIIC_INTR_RX_FULL_MASK 0x08 /* 1=Rx FIFO/reg=OCY level*/
|
|
#define XIIC_INTR_BNB_MASK 0x10 /* 1 = Bus not busy */
|
|
#define XIIC_INTR_AAS_MASK 0x20 /* 1 = when addr as slave */
|
|
#define XIIC_INTR_NAAS_MASK 0x40 /* 1 = not addr as slave */
|
|
#define XIIC_INTR_TX_HALF_MASK 0x80 /* 1 = TX FIFO half empty */
|
|
|
|
/* IPIF Device Interrupt Register masks */
|
|
|
|
#define XIIC_IPIF_IIC_MASK 0x00000004UL /* 1=inter enabled */
|
|
#define XIIC_IPIF_ERROR_MASK 0x00000001UL /* 1=inter enabled */
|
|
#define XIIC_IPIF_INTER_ENABLE_MASK (XIIC_IPIF_IIC_MASK | \
|
|
XIIC_IPIF_ERROR_MASK)
|
|
|
|
#define XIIC_TX_ADDR_SENT 0x00
|
|
#define XIIC_TX_ADDR_MSTR_RECV_MASK 0x02
|
|
|
|
/* The following constants specify the depth of the FIFOs */
|
|
|
|
#define IIC_RX_FIFO_DEPTH 16 /* Rx fifo capacity */
|
|
#define IIC_TX_FIFO_DEPTH 16 /* Tx fifo capacity */
|
|
|
|
/* The following constants specify groups of interrupts that are typically
|
|
* enabled or disables at the same time
|
|
*/
|
|
#define XIIC_TX_INTERRUPTS \
|
|
(XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_TX_EMPTY_MASK | \
|
|
XIIC_INTR_TX_HALF_MASK)
|
|
|
|
#define XIIC_TX_RX_INTERRUPTS (XIIC_INTR_RX_FULL_MASK | XIIC_TX_INTERRUPTS)
|
|
|
|
/* The following constants are used with the following macros to specify the
|
|
* operation, a read or write operation.
|
|
*/
|
|
#define XIIC_READ_OPERATION 1
|
|
#define XIIC_WRITE_OPERATION 0
|
|
|
|
/* The following constants are used with the transmit FIFO fill function to
|
|
* specify the role which the IIC device is acting as, a master or a slave.
|
|
*/
|
|
#define XIIC_MASTER_ROLE 1
|
|
#define XIIC_SLAVE_ROLE 0
|
|
|
|
/**************************** Type Definitions ******************************/
|
|
|
|
|
|
/***************** Macros (Inline Functions) Definitions ********************/
|
|
|
|
|
|
/************************** Function Prototypes *****************************/
|
|
|
|
unsigned XIic_Recv(u32 BaseAddress, u8 Address,
|
|
u8 *BufferPtr, unsigned ByteCount);
|
|
|
|
unsigned XIic_Send(u32 BaseAddress, u8 Address,
|
|
u8 *BufferPtr, unsigned ByteCount);
|
|
|
|
#endif /* end of protection macro */
|