u-boot-brain/common/cmd_ubi.c
Paul Burton cc734f5ab2 cmd_ubi: add write.part command, to write a volume in multiple parts
This allows you to write data to an UBI volume when the amount of memory
available to write that data from is less than the total size of the
data. For example, you may split a root filesystem UBIFS image into
parts, provide the total size of the image to the first write.part
command and then use multiple write.part commands to write the
subsequent parts of the volume. This results in a sequence of commands
akin to:

  ext4load mmc 0:1 0x80000000 rootfs.ubifs.0
  ubi write.part 0x80000000 root 0x08000000 0x18000000
  ext4load mmc 0:1 0x80000000 rootfs.ubifs.1
  ubi write.part 0x80000000 root 0x08000000
  ext4load mmc 0:1 0x80000000 rootfs.ubifs.2
  ubi write.part 0x80000000 root 0x08000000

This would write 384MiB of data to the UBI volume 'root' whilst only
requiring 128MiB of said data to be held in memory at a time.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Stefan Roese <sr@denx.de>
2013-10-09 12:52:22 -05:00

681 lines
15 KiB
C

/*
* Unsorted Block Image commands
*
* Copyright (C) 2008 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
* Copyright 2008-2009 Stefan Roese <sr@denx.de>, DENX Software Engineering
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <common.h>
#include <command.h>
#include <exports.h>
#include <nand.h>
#include <onenand_uboot.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <ubi_uboot.h>
#include <asm/errno.h>
#include <jffs2/load_kernel.h>
#undef ubi_msg
#define ubi_msg(fmt, ...) printf("UBI: " fmt "\n", ##__VA_ARGS__)
#define DEV_TYPE_NONE 0
#define DEV_TYPE_NAND 1
#define DEV_TYPE_ONENAND 2
#define DEV_TYPE_NOR 3
/* Private own data */
static struct ubi_device *ubi;
static char buffer[80];
static int ubi_initialized;
struct selected_dev {
char part_name[80];
int selected;
int nr;
struct mtd_info *mtd_info;
};
static struct selected_dev ubi_dev;
#ifdef CONFIG_CMD_UBIFS
int ubifs_is_mounted(void);
void cmd_ubifs_umount(void);
#endif
static void ubi_dump_vol_info(const struct ubi_volume *vol)
{
ubi_msg("volume information dump:");
ubi_msg("vol_id %d", vol->vol_id);
ubi_msg("reserved_pebs %d", vol->reserved_pebs);
ubi_msg("alignment %d", vol->alignment);
ubi_msg("data_pad %d", vol->data_pad);
ubi_msg("vol_type %d", vol->vol_type);
ubi_msg("name_len %d", vol->name_len);
ubi_msg("usable_leb_size %d", vol->usable_leb_size);
ubi_msg("used_ebs %d", vol->used_ebs);
ubi_msg("used_bytes %lld", vol->used_bytes);
ubi_msg("last_eb_bytes %d", vol->last_eb_bytes);
ubi_msg("corrupted %d", vol->corrupted);
ubi_msg("upd_marker %d", vol->upd_marker);
if (vol->name_len <= UBI_VOL_NAME_MAX &&
strnlen(vol->name, vol->name_len + 1) == vol->name_len) {
ubi_msg("name %s", vol->name);
} else {
ubi_msg("the 1st 5 characters of the name: %c%c%c%c%c",
vol->name[0], vol->name[1], vol->name[2],
vol->name[3], vol->name[4]);
}
printf("\n");
}
static void display_volume_info(struct ubi_device *ubi)
{
int i;
for (i = 0; i < (ubi->vtbl_slots + 1); i++) {
if (!ubi->volumes[i])
continue; /* Empty record */
ubi_dump_vol_info(ubi->volumes[i]);
}
}
static void display_ubi_info(struct ubi_device *ubi)
{
ubi_msg("MTD device name: \"%s\"", ubi->mtd->name);
ubi_msg("MTD device size: %llu MiB", ubi->flash_size >> 20);
ubi_msg("physical eraseblock size: %d bytes (%d KiB)",
ubi->peb_size, ubi->peb_size >> 10);
ubi_msg("logical eraseblock size: %d bytes", ubi->leb_size);
ubi_msg("number of good PEBs: %d", ubi->good_peb_count);
ubi_msg("number of bad PEBs: %d", ubi->bad_peb_count);
ubi_msg("smallest flash I/O unit: %d", ubi->min_io_size);
ubi_msg("VID header offset: %d (aligned %d)",
ubi->vid_hdr_offset, ubi->vid_hdr_aloffset);
ubi_msg("data offset: %d", ubi->leb_start);
ubi_msg("max. allowed volumes: %d", ubi->vtbl_slots);
ubi_msg("wear-leveling threshold: %d", CONFIG_MTD_UBI_WL_THRESHOLD);
ubi_msg("number of internal volumes: %d", UBI_INT_VOL_COUNT);
ubi_msg("number of user volumes: %d",
ubi->vol_count - UBI_INT_VOL_COUNT);
ubi_msg("available PEBs: %d", ubi->avail_pebs);
ubi_msg("total number of reserved PEBs: %d", ubi->rsvd_pebs);
ubi_msg("number of PEBs reserved for bad PEB handling: %d",
ubi->beb_rsvd_pebs);
ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
}
static int ubi_info(int layout)
{
if (layout)
display_volume_info(ubi);
else
display_ubi_info(ubi);
return 0;
}
static int verify_mkvol_req(const struct ubi_device *ubi,
const struct ubi_mkvol_req *req)
{
int n, err = EINVAL;
if (req->bytes < 0 || req->alignment < 0 || req->vol_type < 0 ||
req->name_len < 0)
goto bad;
if ((req->vol_id < 0 || req->vol_id >= ubi->vtbl_slots) &&
req->vol_id != UBI_VOL_NUM_AUTO)
goto bad;
if (req->alignment == 0)
goto bad;
if (req->bytes == 0) {
printf("No space left in UBI device!\n");
err = ENOMEM;
goto bad;
}
if (req->vol_type != UBI_DYNAMIC_VOLUME &&
req->vol_type != UBI_STATIC_VOLUME)
goto bad;
if (req->alignment > ubi->leb_size)
goto bad;
n = req->alignment % ubi->min_io_size;
if (req->alignment != 1 && n)
goto bad;
if (req->name_len > UBI_VOL_NAME_MAX) {
printf("Name too long!\n");
err = ENAMETOOLONG;
goto bad;
}
return 0;
bad:
return err;
}
static int ubi_create_vol(char *volume, int64_t size, int dynamic)
{
struct ubi_mkvol_req req;
int err;
if (dynamic)
req.vol_type = UBI_DYNAMIC_VOLUME;
else
req.vol_type = UBI_STATIC_VOLUME;
req.vol_id = UBI_VOL_NUM_AUTO;
req.alignment = 1;
req.bytes = size;
strcpy(req.name, volume);
req.name_len = strlen(volume);
req.name[req.name_len] = '\0';
req.padding1 = 0;
/* It's duplicated at drivers/mtd/ubi/cdev.c */
err = verify_mkvol_req(ubi, &req);
if (err) {
printf("verify_mkvol_req failed %d\n", err);
return err;
}
printf("Creating %s volume %s of size %lld\n",
dynamic ? "dynamic" : "static", volume, size);
/* Call real ubi create volume */
return ubi_create_volume(ubi, &req);
}
static struct ubi_volume *ubi_find_volume(char *volume)
{
struct ubi_volume *vol = NULL;
int i;
for (i = 0; i < ubi->vtbl_slots; i++) {
vol = ubi->volumes[i];
if (vol && !strcmp(vol->name, volume))
return vol;
}
printf("Volume %s not found!\n", volume);
return NULL;
}
static int ubi_remove_vol(char *volume)
{
int err, reserved_pebs, i;
struct ubi_volume *vol;
vol = ubi_find_volume(volume);
if (vol == NULL)
return ENODEV;
printf("Remove UBI volume %s (id %d)\n", vol->name, vol->vol_id);
if (ubi->ro_mode) {
printf("It's read-only mode\n");
err = EROFS;
goto out_err;
}
err = ubi_change_vtbl_record(ubi, vol->vol_id, NULL);
if (err) {
printf("Error changing Vol tabel record err=%x\n", err);
goto out_err;
}
reserved_pebs = vol->reserved_pebs;
for (i = 0; i < vol->reserved_pebs; i++) {
err = ubi_eba_unmap_leb(ubi, vol, i);
if (err)
goto out_err;
}
kfree(vol->eba_tbl);
ubi->volumes[vol->vol_id]->eba_tbl = NULL;
ubi->volumes[vol->vol_id] = NULL;
ubi->rsvd_pebs -= reserved_pebs;
ubi->avail_pebs += reserved_pebs;
i = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
if (i > 0) {
i = ubi->avail_pebs >= i ? i : ubi->avail_pebs;
ubi->avail_pebs -= i;
ubi->rsvd_pebs += i;
ubi->beb_rsvd_pebs += i;
if (i > 0)
ubi_msg("reserve more %d PEBs", i);
}
ubi->vol_count -= 1;
return 0;
out_err:
ubi_err("cannot remove volume %s, error %d", volume, err);
if (err < 0)
err = -err;
return err;
}
int ubi_volume_continue_write(char *volume, void *buf, size_t size)
{
int err = 1;
struct ubi_volume *vol;
vol = ubi_find_volume(volume);
if (vol == NULL)
return ENODEV;
err = ubi_more_update_data(ubi, vol, buf, size);
if (err < 0) {
printf("Couldnt or partially wrote data\n");
return -err;
}
if (err) {
size = err;
err = ubi_check_volume(ubi, vol->vol_id);
if (err < 0)
return -err;
if (err) {
ubi_warn("volume %d on UBI device %d is corrupted",
vol->vol_id, ubi->ubi_num);
vol->corrupted = 1;
}
vol->checked = 1;
ubi_gluebi_updated(vol);
}
return 0;
}
int ubi_volume_begin_write(char *volume, void *buf, size_t size,
size_t full_size)
{
int err = 1;
int rsvd_bytes = 0;
struct ubi_volume *vol;
vol = ubi_find_volume(volume);
if (vol == NULL)
return ENODEV;
rsvd_bytes = vol->reserved_pebs * (ubi->leb_size - vol->data_pad);
if (size < 0 || size > rsvd_bytes) {
printf("size > volume size! Aborting!\n");
return EINVAL;
}
err = ubi_start_update(ubi, vol, full_size);
if (err < 0) {
printf("Cannot start volume update\n");
return -err;
}
return ubi_volume_continue_write(volume, buf, size);
}
int ubi_volume_write(char *volume, void *buf, size_t size)
{
return ubi_volume_begin_write(volume, buf, size, size);
}
int ubi_volume_read(char *volume, char *buf, size_t size)
{
int err, lnum, off, len, tbuf_size;
void *tbuf;
unsigned long long tmp;
struct ubi_volume *vol;
loff_t offp = 0;
vol = ubi_find_volume(volume);
if (vol == NULL)
return ENODEV;
if (vol->updating) {
printf("updating");
return EBUSY;
}
if (vol->upd_marker) {
printf("damaged volume, update marker is set");
return EBADF;
}
if (offp == vol->used_bytes)
return 0;
if (size == 0) {
printf("No size specified -> Using max size (%lld)\n", vol->used_bytes);
size = vol->used_bytes;
}
if (vol->corrupted)
printf("read from corrupted volume %d", vol->vol_id);
if (offp + size > vol->used_bytes)
size = vol->used_bytes - offp;
tbuf_size = vol->usable_leb_size;
if (size < tbuf_size)
tbuf_size = ALIGN(size, ubi->min_io_size);
tbuf = malloc(tbuf_size);
if (!tbuf) {
printf("NO MEM\n");
return ENOMEM;
}
len = size > tbuf_size ? tbuf_size : size;
tmp = offp;
off = do_div(tmp, vol->usable_leb_size);
lnum = tmp;
do {
if (off + len >= vol->usable_leb_size)
len = vol->usable_leb_size - off;
err = ubi_eba_read_leb(ubi, vol, lnum, tbuf, off, len, 0);
if (err) {
printf("read err %x\n", err);
err = -err;
break;
}
off += len;
if (off == vol->usable_leb_size) {
lnum += 1;
off -= vol->usable_leb_size;
}
size -= len;
offp += len;
memcpy(buf, tbuf, len);
buf += len;
len = size > tbuf_size ? tbuf_size : size;
} while (size);
free(tbuf);
return err;
}
static int ubi_dev_scan(struct mtd_info *info, char *ubidev,
const char *vid_header_offset)
{
struct mtd_device *dev;
struct part_info *part;
struct mtd_partition mtd_part;
char ubi_mtd_param_buffer[80];
u8 pnum;
int err;
if (find_dev_and_part(ubidev, &dev, &pnum, &part) != 0)
return 1;
sprintf(buffer, "mtd=%d", pnum);
memset(&mtd_part, 0, sizeof(mtd_part));
mtd_part.name = buffer;
mtd_part.size = part->size;
mtd_part.offset = part->offset;
add_mtd_partitions(info, &mtd_part, 1);
strcpy(ubi_mtd_param_buffer, buffer);
if (vid_header_offset)
sprintf(ubi_mtd_param_buffer, "mtd=%d,%s", pnum,
vid_header_offset);
err = ubi_mtd_param_parse(ubi_mtd_param_buffer, NULL);
if (err) {
del_mtd_partitions(info);
return -err;
}
err = ubi_init();
if (err) {
del_mtd_partitions(info);
return -err;
}
ubi_initialized = 1;
return 0;
}
int ubi_part(char *part_name, const char *vid_header_offset)
{
int err = 0;
char mtd_dev[16];
struct mtd_device *dev;
struct part_info *part;
u8 pnum;
if (mtdparts_init() != 0) {
printf("Error initializing mtdparts!\n");
return 1;
}
#ifdef CONFIG_CMD_UBIFS
/*
* Automatically unmount UBIFS partition when user
* changes the UBI device. Otherwise the following
* UBIFS commands will crash.
*/
if (ubifs_is_mounted())
cmd_ubifs_umount();
#endif
/* todo: get dev number for NAND... */
ubi_dev.nr = 0;
/*
* Call ubi_exit() before re-initializing the UBI subsystem
*/
if (ubi_initialized) {
ubi_exit();
del_mtd_partitions(ubi_dev.mtd_info);
}
/*
* Search the mtd device number where this partition
* is located
*/
if (find_dev_and_part(part_name, &dev, &pnum, &part)) {
printf("Partition %s not found!\n", part_name);
return 1;
}
sprintf(mtd_dev, "%s%d", MTD_DEV_TYPE(dev->id->type), dev->id->num);
ubi_dev.mtd_info = get_mtd_device_nm(mtd_dev);
if (IS_ERR(ubi_dev.mtd_info)) {
printf("Partition %s not found on device %s!\n", part_name,
mtd_dev);
return 1;
}
ubi_dev.selected = 1;
strcpy(ubi_dev.part_name, part_name);
err = ubi_dev_scan(ubi_dev.mtd_info, ubi_dev.part_name,
vid_header_offset);
if (err) {
printf("UBI init error %d\n", err);
ubi_dev.selected = 0;
return err;
}
ubi = ubi_devices[0];
return 0;
}
static int do_ubi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int64_t size = 0;
ulong addr = 0;
if (argc < 2)
return CMD_RET_USAGE;
if (strcmp(argv[1], "part") == 0) {
const char *vid_header_offset = NULL;
/* Print current partition */
if (argc == 2) {
if (!ubi_dev.selected) {
printf("Error, no UBI device/partition selected!\n");
return 1;
}
printf("Device %d: %s, partition %s\n",
ubi_dev.nr, ubi_dev.mtd_info->name, ubi_dev.part_name);
return 0;
}
if (argc < 3)
return CMD_RET_USAGE;
if (argc > 3)
vid_header_offset = argv[3];
return ubi_part(argv[2], vid_header_offset);
}
if ((strcmp(argv[1], "part") != 0) && (!ubi_dev.selected)) {
printf("Error, no UBI device/partition selected!\n");
return 1;
}
if (strcmp(argv[1], "info") == 0) {
int layout = 0;
if (argc > 2 && !strncmp(argv[2], "l", 1))
layout = 1;
return ubi_info(layout);
}
if (strncmp(argv[1], "create", 6) == 0) {
int dynamic = 1; /* default: dynamic volume */
/* Use maximum available size */
size = 0;
/* E.g., create volume size type */
if (argc == 5) {
if (strncmp(argv[4], "s", 1) == 0)
dynamic = 0;
else if (strncmp(argv[4], "d", 1) != 0) {
printf("Incorrect type\n");
return 1;
}
argc--;
}
/* E.g., create volume size */
if (argc == 4) {
size = simple_strtoull(argv[3], NULL, 16);
argc--;
}
/* Use maximum available size */
if (!size) {
size = (int64_t)ubi->avail_pebs * ubi->leb_size;
printf("No size specified -> Using max size (%lld)\n", size);
}
/* E.g., create volume */
if (argc == 3)
return ubi_create_vol(argv[2], size, dynamic);
}
if (strncmp(argv[1], "remove", 6) == 0) {
/* E.g., remove volume */
if (argc == 3)
return ubi_remove_vol(argv[2]);
}
if (strncmp(argv[1], "write", 5) == 0) {
int ret;
if (argc < 5) {
printf("Please see usage\n");
return 1;
}
addr = simple_strtoul(argv[2], NULL, 16);
size = simple_strtoul(argv[4], NULL, 16);
if (strlen(argv[1]) == 10 &&
strncmp(argv[1] + 5, ".part", 5) == 0) {
if (argc < 6) {
ret = ubi_volume_continue_write(argv[3],
(void *)addr, size);
} else {
size_t full_size;
full_size = simple_strtoul(argv[5], NULL, 16);
ret = ubi_volume_begin_write(argv[3],
(void *)addr, size, full_size);
}
} else {
ret = ubi_volume_write(argv[3], (void *)addr, size);
}
if (!ret) {
printf("%lld bytes written to volume %s\n", size,
argv[3]);
}
return ret;
}
if (strncmp(argv[1], "read", 4) == 0) {
size = 0;
/* E.g., read volume size */
if (argc == 5) {
size = simple_strtoul(argv[4], NULL, 16);
argc--;
}
/* E.g., read volume */
if (argc == 4) {
addr = simple_strtoul(argv[2], NULL, 16);
argc--;
}
if (argc == 3) {
printf("Read %lld bytes from volume %s to %lx\n", size,
argv[3], addr);
return ubi_volume_read(argv[3], (char *)addr, size);
}
}
printf("Please see usage\n");
return 1;
}
U_BOOT_CMD(
ubi, 6, 1, do_ubi,
"ubi commands",
"part [part] [offset]\n"
" - Show or set current partition (with optional VID"
" header offset)\n"
"ubi info [l[ayout]]"
" - Display volume and ubi layout information\n"
"ubi create[vol] volume [size] [type]"
" - create volume name with size\n"
"ubi write[vol] address volume size"
" - Write volume from address with size\n"
"ubi write.part address volume size [fullsize]\n"
" - Write part of a volume from address\n"
"ubi read[vol] address volume [size]"
" - Read volume to address with size\n"
"ubi remove[vol] volume"
" - Remove volume\n"
"[Legends]\n"
" volume: character name\n"
" size: specified in bytes\n"
" type: s[tatic] or d[ynamic] (default=dynamic)"
);