Stefan Roese d4cb2d1794 ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode ... This patch adds support for dynamic configuration of PCIe ports for the AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe boards Yucca & Katmai and the 405EX board Kilauea. This dynamic configuration is done via the "pcie_mode" environement variable. This variable can be set to "EP" or "RP" for endpoint or rootpoint mode. Multiple values can be joined via the ":" delimiter. Here an example: pcie_mode=RP:EP:EP This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2 as endpoint. Per default Yucca will be configured as: pcie_mode=RP:EP:EP Per default Katmai will be configured as: pcie_mode=RP:RP:REP Per default Kilauea will be configured as: pcie_mode=RP:RP Signed-off-by: Tirumala R Marri <tmarri@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>		2007-10-31 21:20:50 +01:00
..
cmd_yucca.c	Add support for TB5200 board	2006-07-19 13:50:38 +02:00
config.mk	Add support for AMCC 440SPe CPU based eval board (Yucca).	2006-06-30 16:30:46 +02:00
flash.c	Add support for TB5200 board	2006-07-19 13:50:38 +02:00
init.S	[PPC440SPe] Improve PCIe configuration space access	2007-09-07 18:20:23 +02:00
Makefile	Move "ar" flags to config.mk to allow for silent "make -s"	2006-10-09 01:02:05 +02:00
u-boot.lds	Add support for AMCC 440SPe CPU based eval board (Yucca).	2006-06-30 16:30:46 +02:00
u-boot.lds.debug	Add support for AMCC 440SPe CPU based eval board (Yucca).	2006-06-30 16:30:46 +02:00
yucca.c	ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode	2007-10-31 21:20:50 +01:00
yucca.h	Improve DIMM detection for AMCC Yucca 440SPe board	2006-08-29 08:04:32 +02:00