mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Rasmus Villemoes](/assets/img/avatar_default.png)
Prepare for supporting setting different speeds in mpc8xxx_spi.c. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
362 lines
8.2 KiB
Plaintext
362 lines
8.2 KiB
Plaintext
/*
|
|
* Basic platform for gdsys mpc8308 based devices
|
|
*
|
|
* (C) Copyright 2014
|
|
* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
|
|
*
|
|
* based on mpc8308rdb
|
|
* Copyright 2009 Freescale Semiconductor Inc.
|
|
* Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/memory/mpc83xx-sdram.h>
|
|
#include <dt-bindings/clk/mpc83xx-clk.h>
|
|
|
|
/ {
|
|
compatible = "fsl,mpc8308rdb";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,8308@0 {
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
d-cache-line-size = <32>;
|
|
i-cache-line-size = <32>;
|
|
d-cache-size = <16384>;
|
|
i-cache-size = <16384>;
|
|
timebase-frequency = <0>; // from bootloader
|
|
bus-frequency = <0>; // from bootloader
|
|
clock-frequency = <0>; // from bootloader
|
|
};
|
|
};
|
|
|
|
socclocks: clocks {
|
|
compatible = "fsl,mpc8308-clk";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
board_lbc: localbus@e0005000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
|
|
reg = <0xe0005000 0x1000>;
|
|
interrupts = <77 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
board_soc: immr@e0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
compatible = "fsl,mpc8308-immr", "simple-bus";
|
|
ranges = <0 0xe0000000 0x00100000>;
|
|
reg = <0xe0000000 0x00000200>;
|
|
bus-frequency = <0>;
|
|
|
|
wdt@200 {
|
|
device_type = "watchdog";
|
|
compatible = "mpc83xx_wdt";
|
|
reg = <0x200 0x100>;
|
|
};
|
|
|
|
memory@2000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc83xx-mem-controller";
|
|
reg = <0x2000 0x1000>;
|
|
device_type = "memory";
|
|
|
|
driver_software_override = <DSO_ENABLE>;
|
|
p_impedance_override = <DSO_P_IMPEDANCE_NOMINAL>;
|
|
n_impedance_override = <DSO_N_IMPEDANCE_NOMINAL>;
|
|
odt_termination_value = <ODT_TERMINATION_150_OHM>;
|
|
ddr_type = <DDR_TYPE_DDR2_1_8_VOLT>;
|
|
|
|
clock_adjust = <CLOCK_ADJUST_05>;
|
|
|
|
read_to_write = <0>;
|
|
write_to_read = <0>;
|
|
read_to_read = <0>;
|
|
write_to_write = <0>;
|
|
active_powerdown_exit = <2>;
|
|
precharge_powerdown_exit = <6>;
|
|
odt_powerdown_exit = <8>;
|
|
mode_reg_set_cycle = <2>;
|
|
|
|
precharge_to_activate = <2>;
|
|
activate_to_precharge = <6>;
|
|
activate_to_readwrite = <2>;
|
|
mcas_latency = <CASLAT_40>;
|
|
refresh_recovery = <17>;
|
|
last_data_to_precharge = <2>;
|
|
activate_to_activate = <2>;
|
|
last_write_data_to_read = <2>;
|
|
|
|
additive_latency = <0>;
|
|
mcas_to_preamble_override = <READ_LAT_PLUS_1_2>;
|
|
write_latency = <3>;
|
|
read_to_precharge = <2>;
|
|
write_cmd_to_write_data = <CLOCK_DELAY_1_2>;
|
|
minimum_cke_pulse_width = <3>;
|
|
four_activates_window = <5>;
|
|
|
|
self_refresh = <SREN_ENABLE>;
|
|
sdram_type = <TYPE_DDR2>;
|
|
databus_width = <DATA_BUS_WIDTH_32>;
|
|
|
|
force_self_refresh = <MODE_NORMAL>;
|
|
dll_reset = <DLL_RESET_ENABLE>;
|
|
dqs_config = <DQS_TRUE>;
|
|
odt_config = <ODT_ASSERT_READS>;
|
|
posted_refreshes = <1>;
|
|
|
|
refresh_interval = <2084>;
|
|
precharge_interval = <256>;
|
|
|
|
sdmode = <0x0242>;
|
|
esdmode = <0x0440>;
|
|
|
|
ram@0 {
|
|
reg = <0x0 0x0 0x8000000>;
|
|
compatible = "nanya,nt5tu64m16hg";
|
|
|
|
odt_rd_cfg = <ODT_RD_NEVER>;
|
|
odt_wr_cfg = <ODT_WR_ONLY_CURRENT>;
|
|
bank_bits = <3>;
|
|
row_bits = <13>;
|
|
col_bits = <10>;
|
|
};
|
|
};
|
|
|
|
IIC:i2c@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3000 0x100>;
|
|
interrupts = <14 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
dfsrr;
|
|
};
|
|
|
|
IIC2: i2c@3100 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3100 0x100>;
|
|
interrupts = <15 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
dfsrr;
|
|
status = "disabled";
|
|
};
|
|
|
|
SPI:spi@7000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl,spi";
|
|
reg = <0x7000 0x1000>;
|
|
interrupts = <16 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
clocks = <&socclocks MPC83XX_CLK_CSB>;
|
|
mode = "cpu";
|
|
};
|
|
|
|
sdhc@2e000 {
|
|
compatible = "fsl,esdhc", "fsl,mpc8308-esdhc";
|
|
reg = <0x2e000 0x1000>;
|
|
interrupts = <42 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
sdhci,auto-cmd12;
|
|
/* Filled in by U-Boot */
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
serial0: serial@4500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "fsl,ns16550", "ns16550";
|
|
reg = <0x4500 0x100>;
|
|
clock-frequency = <133333333>;
|
|
interrupts = <9 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
serial1: serial@4600 {
|
|
cell-index = <1>;
|
|
device_type = "serial";
|
|
compatible = "fsl,ns16550", "ns16550";
|
|
reg = <0x4600 0x100>;
|
|
clock-frequency = <133333333>;
|
|
interrupts = <10 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
gpio0: gpio@c00 {
|
|
#gpio-cells = <2>;
|
|
device_type = "gpio";
|
|
compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
|
|
reg = <0xc00 0x18>;
|
|
interrupts = <74 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
gpio-controller;
|
|
};
|
|
|
|
/* IPIC
|
|
* interrupts cell = <intr #, sense>
|
|
* sense values match linux IORESOURCE_IRQ_* defines:
|
|
* sense == 8: Level, low assertion
|
|
* sense == 2: Edge, high-to-low change
|
|
*/
|
|
ipic: interrupt-controller@700 {
|
|
compatible = "fsl,ipic";
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x700 0x100>;
|
|
device_type = "ipic";
|
|
};
|
|
|
|
ipic-msi@7c0 {
|
|
compatible = "fsl,ipic-msi";
|
|
reg = <0x7c0 0x40>;
|
|
msi-available-ranges = <0x0 0x100>;
|
|
interrupts = < 0x43 0x8
|
|
0x4 0x8
|
|
0x51 0x8
|
|
0x52 0x8
|
|
0x56 0x8
|
|
0x57 0x8
|
|
0x58 0x8
|
|
0x59 0x8 >;
|
|
interrupt-parent = < &ipic >;
|
|
};
|
|
|
|
dma@2c000 {
|
|
compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma";
|
|
reg = <0x2c000 0x1800>;
|
|
interrupts = <3 0x8
|
|
94 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
};
|
|
|
|
enet0: ethernet@24000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x24000 0x1000>;
|
|
|
|
cell-index = <0>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "gianfar", "fsl,tsec";
|
|
reg = <0x24000 0x1000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <32 0x8 33 0x8 34 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
tbi-handle = < &tbi0 >;
|
|
phy-handle = < &phy1 >;
|
|
fsl,magic-packet;
|
|
|
|
mdio@520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,gianfar-mdio";
|
|
reg = <0x520 0x20>;
|
|
phy1: ethernet-phy@1 {
|
|
reg = <0x1>;
|
|
};
|
|
phy2: ethernet-phy@0 {
|
|
reg = <0x0>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
tbi0: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
};
|
|
|
|
enet1: ethernet@25000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cell-index = <1>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "gianfar", "fsl,tsec";
|
|
reg = <0x25000 0x1000>;
|
|
ranges = <0x0 0x25000 0x1000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <35 0x8 36 0x8 37 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
phy-handle = < &phy2 >;
|
|
status = "disabled";
|
|
|
|
mdio@520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,gianfar-tbi";
|
|
reg = <0x520 0x20>;
|
|
tbi1: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
pci0: pcie@e0009000 {
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
device_type = "pci";
|
|
compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
|
|
reg = <0xe0009000 0x00001000
|
|
0xb0000000 0x01000000>;
|
|
ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
|
|
0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
|
|
bus-range = <0 0>;
|
|
interrupt-map-mask = <0xf800 0 0 7>;
|
|
interrupt-map = <0 0 0 1 &ipic 1 8
|
|
0 0 0 2 &ipic 1 8
|
|
0 0 0 3 &ipic 1 8
|
|
0 0 0 4 &ipic 1 8>;
|
|
interrupts = <0x1 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
clock-frequency = <0>;
|
|
|
|
pcie@0 {
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
reg = <0 0 0 0 0>;
|
|
ranges = <0x02000000 0 0xa0000000
|
|
0x02000000 0 0xa0000000
|
|
0 0x10000000
|
|
0x01000000 0 0x00000000
|
|
0x01000000 0 0x00000000
|
|
0 0x00800000>;
|
|
};
|
|
};
|
|
};
|