mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Nikita Kiryanov](/assets/img/avatar_default.png)
Add option to set shell prompt string from menuconfig and migrate boards globally. The migration is done as follows: - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the entry moved to their defconfig files. - Boards that defined some kind of #ifdef logic which selects the CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT right before the #ifdef logic and were left alone. - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h files. This results in a streamlined default value across platforms, and includes the following files: spear-common, sunxi-common, mv-common, ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common. - Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were not updated in their respective defconfig files under the assumption that since they did not explicitly define a value, they're fine with whatever the default is. - On the other hand, boards that relied on a value defined in some <boards>_common.h file such as woodburn_common, rpi-common, bur_am335x_common, ls2085a_common, siemens_am33x_common, and omap3_evm_common, had their values moved to the respective defconfig files. - The define V_PROMPT was removed, since it is not used anywhere except for assigning a value for CONFIG_SYS_PROMPT. Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> [trini: Add spring, sniper, smartweb to conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
430 lines
12 KiB
C
430 lines
12 KiB
C
/*
|
|
* (C) Copyright 2009-2012
|
|
* Jens Scharsig <esw@bus-elekronik.de>
|
|
* BuS Elektronik GmbH & Co. KG
|
|
*
|
|
* Configuation settings for the VL_MA2SC board.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
#define CONFIG_AT91SAM9263 /* It's an Atmel AT91SAM9263 SoC*/
|
|
#define CONFIG_VL_MA2SC /* on an VL_MA2SC Board */
|
|
#define CONFIG_ARCH_CPU_INIT
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
#include <asm/hardware.h>
|
|
|
|
#define MACH_TYPE_VL_MA2SC 2412
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_VL_MA2SC
|
|
|
|
#define CONFIG_SYS_DCACHE_OFF
|
|
|
|
#ifdef CONFIG_RAMLOAD
|
|
#define CONFIG_SYS_TEXT_BASE 0x21000000
|
|
#else
|
|
#define CONFIG_SYS_TEXT_BASE 0x00000000
|
|
#endif
|
|
#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
|
|
|
|
#define CONFIG_IDENT_STRING " on MiS Activ 2"
|
|
#define CONFIG_VERSION_VARIABLE
|
|
#define CONFIG_AT91_GPIO
|
|
|
|
#if !defined(CONFIG_SYS_USE_NANDFLASH) && !defined(CONFIG_RAMLOAD)
|
|
#define CONFIG_SYS_USE_NORFLASH
|
|
#define CONFIG_SYS_USE_BOOT_NORFLASH
|
|
#endif
|
|
|
|
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
|
|
#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#endif
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
|
|
#define CONFIG_WATCHDOG
|
|
|
|
#define CONFIG_ATMEL_USART
|
|
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
|
#define CONFIG_USART_ID ATMEL_ID_SYS
|
|
|
|
/* LCD */
|
|
#define CONFIG_LCD
|
|
#define CONFIG_ATMEL_LCD
|
|
#define CONFIG_SPLASH_SCREEN
|
|
#define CONFIG_SYS_BLACK_ON_WHITE
|
|
#define LCD_BPP LCD_COLOR8
|
|
#define CONFIG_ATMEL_LCD_BGR555
|
|
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
|
#define CONFIG_BOOTDELAY 3
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#define CONFIG_CMD_BMP
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_MD5SUM
|
|
#define CONFIG_CMD_SHA1SUM
|
|
/*
|
|
#define CONFIG_CMD_SPI
|
|
*/
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_USB
|
|
|
|
#define CONFIG_SYS_LONGHELP
|
|
#define CONFIG_MD5
|
|
#define CONFIG_SHA1
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* Hardware confuguration
|
|
*---------------------------------------------------------------------------*/
|
|
|
|
/* USB */
|
|
#define CONFIG_USB_ATMEL
|
|
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
|
|
#define CONFIG_USB_OHCI_NEW
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* UHP_BASE */
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONFIG_AT91C_PQFP_UHPBUG
|
|
|
|
/* I2C-Bus */
|
|
|
|
#define CONFIG_SYS_I2C_SPEED 50000
|
|
#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
|
|
|
|
#ifndef CONFIG_HARD_I2C
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
|
|
#define CONFIG_SYS_I2C_SOFT_SPEED CONFIG_SYS_I2C_SPEED
|
|
#define CONFIG_SYS_I2C_SOFT_SLAVE CONFIG_SYS_I2C_SLAVE
|
|
|
|
/* Software I2C driver configuration */
|
|
#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SPEED)
|
|
|
|
#define AT91_PIN_SDA (1<<4) /* AT91C_PIO_PB4 */
|
|
#define AT91_PIN_SCL (1<<5) /* AT91C_PIO_PB5 */
|
|
|
|
#define I2C_INIT i2c_init_board();
|
|
#define I2C_ACTIVE writel(AT91_PIN_SDA, &pio->piob.mddr);
|
|
#define I2C_TRISTATE writel(AT91_PIN_SDA, &pio->piob.mder);
|
|
#define I2C_READ ((readl(&pio->piob.pdsr) & AT91_PIN_SDA) != 0)
|
|
#define I2C_SDA(bit) \
|
|
do { \
|
|
if (bit) \
|
|
writel(AT91_PIN_SDA, &pio->piob.sodr); \
|
|
else \
|
|
writel(AT91_PIN_SDA, &pio->piob.codr); \
|
|
} while (0);
|
|
#define I2C_SCL(bit) \
|
|
do { \
|
|
if (bit) \
|
|
writel(AT91_PIN_SCL, &pio->piob.sodr); \
|
|
else \
|
|
writel(AT91_PIN_SCL, &pio->piob.codr); \
|
|
} while (0);
|
|
#endif
|
|
|
|
/* I2C-RTC */
|
|
|
|
#ifdef CONFIG_CMD_DATE
|
|
#define CONFIG_RTC_DS1338
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
|
#endif
|
|
|
|
/* EEPROM */
|
|
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
|
|
|
/* define PDC[31:16] as DATA[31:16] */
|
|
#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000
|
|
#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000
|
|
|
|
/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
|
|
#define CONFIG_SYS_MATRIX_EBI0CSA_VAL \
|
|
(AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \
|
|
AT91_MATRIX_CSA_EBI_CS1A)
|
|
|
|
/* user reset enable */
|
|
#define CONFIG_SYS_RSTC_RMR_VAL \
|
|
(AT91_RSTC_KEY | \
|
|
AT91_RSTC_MR_URSTEN | \
|
|
AT91_RSTC_MR_ERSTL(15))
|
|
|
|
/* Disable Watchdog */
|
|
#define CONFIG_SYS_WDTC_WDMR_VAL \
|
|
(AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \
|
|
AT91_WDT_MR_WDV(0xFFF) | \
|
|
AT91_WDT_MR_WDDIS | \
|
|
AT91_WDT_MR_WDD(0xFFF))
|
|
|
|
/* clocks */
|
|
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */
|
|
|
|
#define MHZ180
|
|
#if defined(MHZ199)
|
|
/* 199,8994 MHZ */
|
|
#define MASTER_PLL_MUL 911
|
|
#define MASTER_PLL_DIV 56
|
|
#define MASTER_PLL_OUT 2
|
|
#elif defined(MHZ180)
|
|
/* 180 MHZ */
|
|
#define MASTER_PLL_MUL 1875
|
|
#define MASTER_PLL_DIV 128
|
|
#define MASTER_PLL_OUT 2
|
|
#elif defined(MHZTEST)
|
|
/* Test MHZ */
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
#define MASTER_PLL_MUL 8
|
|
#define MASTER_PLL_DIV 1
|
|
#define MASTER_PLL_OUT 2
|
|
#else
|
|
/* 176.9472 MHZ */
|
|
#define MASTER_PLL_MUL 72
|
|
#define MASTER_PLL_DIV 5
|
|
#define MASTER_PLL_OUT 2
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MOR_VAL \
|
|
(AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255))
|
|
|
|
#define CONFIG_SYS_PLLAR_VAL \
|
|
(AT91_PMC_PLLAR_29 | \
|
|
AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) | \
|
|
AT91_PMC_PLLXR_PLLCOUNT(63) | \
|
|
AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | \
|
|
AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV))
|
|
|
|
/* PCK/2 = MCK Master Clock from PLLA */
|
|
#define CONFIG_SYS_MCKR1_VAL \
|
|
(AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 | \
|
|
AT91_PMC_MCKR_MDIV_2)
|
|
|
|
/* PCK/2 = MCK Master Clock from PLLA */
|
|
#define CONFIG_SYS_MCKR2_VAL \
|
|
(AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \
|
|
AT91_PMC_MCKR_MDIV_2)
|
|
|
|
/* SDRAM */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define CONFIG_SYS_SDRAM_BASE 0x20000000
|
|
#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */
|
|
#define CONFIG_SYS_INIT_SP_ADDR 0x00504000 /* use internal SRAM0 */
|
|
|
|
#define CONFIG_SYS_SDRC_MR_VAL1 0
|
|
#define CONFIG_SYS_SDRC_TR_VAL1 700
|
|
#define CONFIG_SYS_SDRC_CR_VAL \
|
|
(AT91_SDRAMC_NC_9 | \
|
|
AT91_SDRAMC_NR_13 | \
|
|
AT91_SDRAMC_NB_4 | \
|
|
AT91_SDRAMC_CAS_3 | \
|
|
AT91_SDRAMC_DBW_32 | \
|
|
(2 << 8) | /* Write Recovery Delay */ \
|
|
(7 << 12) | /* Row Cycle Delay */ \
|
|
(2 << 16) | /* Row Precharge Delay */ \
|
|
(2 << 20) | /* Row to Column Delay */ \
|
|
(5 << 24) | /* Active to Precharge Delay */ \
|
|
(8 << 28)) /* Exit Self Refresh to Active Delay */
|
|
|
|
#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM
|
|
#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE
|
|
#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH
|
|
#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR
|
|
#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL
|
|
#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */
|
|
#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */
|
|
|
|
/* NOR flash */
|
|
|
|
#define CONFIG_FLASH_SHOW_PROGRESS 45
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#define PHYS_FLASH_1 0x10000000
|
|
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 256
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000)
|
|
|
|
/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
|
|
#define CONFIG_SYS_SMC0_SETUP0_VAL \
|
|
(AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \
|
|
AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
|
|
#define CONFIG_SYS_SMC0_PULSE0_VAL \
|
|
(AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \
|
|
AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
|
|
#define CONFIG_SYS_SMC0_CYCLE0_VAL \
|
|
(AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
|
|
#define CONFIG_SYS_SMC0_MODE0_VAL \
|
|
(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \
|
|
AT91_SMC_MODE_DBW_16 | \
|
|
AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6))
|
|
|
|
/* NAND flash */
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_NAND_ATMEL
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_DBW_8 1
|
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our ALE is AD21 */
|
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* our CLE is AD22 */
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
|
|
#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PB(0)
|
|
#endif
|
|
|
|
/* Ethernet */
|
|
#define CONFIG_MACB
|
|
#define CONFIG_RMII
|
|
#define CONFIG_NET_RETRY_COUNT 5
|
|
#define CONFIG_AT91_WANTS_COMMON_PHY
|
|
|
|
#define CONFIG_OVERWRITE_ETHADDR_ONCE
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END 0x21e00000
|
|
|
|
/* Address and size of Primary Environment Sector */
|
|
#ifdef CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_ENV_SIZE 0x20000
|
|
#else
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#endif
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_SYS_BAUDRATE_TABLE {312500, 230400, 115200, 19200, \
|
|
38400, 57600, 9600 }
|
|
|
|
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
|
|
#define CONFIG_SYS_PBSIZE \
|
|
(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
#define CONFIG_CMDLINE_EDITING
|
|
#define CONFIG_AUTO_COMPLETE
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN \
|
|
ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
|
|
|
|
#ifndef CONFIG_RAMLOAD
|
|
#define CONFIG_BOOTCOMMAND "run nfsboot"
|
|
#endif
|
|
#define CONFIG_BOOT_RETRY_TIME -1
|
|
#define CONFIG_BOOT_RETRY_MIN 15
|
|
|
|
#define CONFIG_NFSBOOTCOMMAND \
|
|
"dhcp $(copy_addr) $(kernelname);" \
|
|
"run bootargsdefaults;" \
|
|
"set bootargs $(bootargs) boot=nfs " \
|
|
";echo $(bootargs)" \
|
|
";bootm"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"ubootaddr=10000000\0" \
|
|
"splashimage=10080000\0" \
|
|
"kerneladdr=100A0000\0" \
|
|
"kernelsize=00800000\0" \
|
|
"minifsaddr=108A0000\0" \
|
|
"minifssize=00060000\0" \
|
|
"rootfsaddr=10900000\0" \
|
|
"copy_addr=20200000\0" \
|
|
"rootfssize=01700000\0" \
|
|
"kernelname=uImage_vl_ma2sc\0" \
|
|
"bootargsdefaults=set bootargs " \
|
|
"console=ttyS0,115200 " \
|
|
"video=atmel_lcdfb " \
|
|
"mem=62M " \
|
|
"panic=10 " \
|
|
"boardrevison=\\\"${revision}\\\" " \
|
|
"uboot=\\\"${ver}\\\" " \
|
|
"\0" \
|
|
"update_all=run update_kernel;run update_root;" \
|
|
"run update_splash; run update_uboot\0" \
|
|
"update_kernel=protect off $(kerneladdr) +$(kernelsize);" \
|
|
"dhcp $(copy_addr) $(kernelname);" \
|
|
"erase $(kerneladdr) +$(kernelsize);" \
|
|
"cp.b $(fileaddr) $(kerneladdr) $(filesize);" \
|
|
"protect on $(kerneladdr) +$(kernelsize)" \
|
|
"\0" \
|
|
"update_root=protect off $(rootfsaddr) +$(rootfssize);" \
|
|
"dhcp $(copy_addr) vl_ma2sc.root;" \
|
|
"erase $(rootfsaddr) +$(rootfssize);" \
|
|
"cp.b $(fileaddr) $(rootfsaddr) $(filesize);" \
|
|
"\0" \
|
|
"update_splash=protect off $(splashimage) +20000;" \
|
|
"dhcp $(copy_addr) splash_vl_ma2sc.bmp;" \
|
|
"erase $(splashimage) +20000;" \
|
|
"cp.b $(fileaddr) 10080000 $(filesize);" \
|
|
"protect on $(splashimage) +20000\0" \
|
|
"update_uboot=protect off 10000000 1005FFFF;" \
|
|
"dhcp $(copy_addr) u-boot_vl_ma2sc;" \
|
|
"erase 10000000 1005FFFF;" \
|
|
"cp.b $(fileaddr) $(ubootaddr) $(filesize);" \
|
|
"protect on 10000000 1005FFFF;reset\0" \
|
|
"emergency=run bootargsdefaults;" \
|
|
"set bootargs $(bootargs) root=initramfs boot=emergency " \
|
|
";bootm $(kerneladdr)\0" \
|
|
"netemergency=run bootargsdefaults;" \
|
|
"dhcp $(copy_addr) $(kernelname);" \
|
|
"set bootargs $(bootargs) root=initramfs boot=emergency " \
|
|
";bootm $(copy_addr)\0" \
|
|
"norboot=run bootargsdefaults;" \
|
|
"set bootargs $(bootargs) root=initramfs boot=local quiet " \
|
|
";bootm $(kerneladdr)\0" \
|
|
"nandboot=run bootargsdefaults;" \
|
|
"set bootargs $(bootargs) root=initramfs boot=nand " \
|
|
";bootm $(kerneladdr)\0" \
|
|
"setnorboot=set bootcmd 'run norboot'; set bootdelay 1;save\0" \
|
|
"clearenv=protect off 10060000 1007FFFF;" \
|
|
"erase 10060000 1007FFFF;reset\0" \
|
|
" "
|
|
|
|
#endif
|