mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-23 02:18:51 +09:00
![Wolfgang Denk](/assets/img/avatar_default.png)
which makes the environment compatible with the hush shell. WARNING: Support for the old '$(...)' syntax will be discontinued in a later version.
347 lines
10 KiB
Plaintext
347 lines
10 KiB
Plaintext
|
|
U-Boot for MOUSSE/MPC8240 (KAHLUA)
|
|
----------------------------------
|
|
James Dougherty (jfd@broadcom.com), 09/10/01
|
|
|
|
The Broadcom/Vooha Mousse board is a 3U Compact PCI system board
|
|
which uses the MPC8240, a 64MB SDRAM SIMM, and has onboard
|
|
DEC 21143, NS16550 UART, an SGS M48T59Y TOD, and 4MB FLASH.
|
|
See also: http://www.vooha.com/
|
|
|
|
* NVRAM setenv/printenv/savenv supported.
|
|
* Date Command
|
|
* Serial Console support
|
|
* Network support
|
|
* FLASH of kernel images is supported.
|
|
* FLASH of U-Boot to onboard and PLCC boot region.
|
|
* Kernel command line options from NVRAM is supported.
|
|
* IP PNP options supported.
|
|
|
|
U-Boot Loading...
|
|
|
|
|
|
U-Boot 1.0.5 (Sep 10 2001 - 00:22:25)
|
|
|
|
CPU: MPC8240 Revision 1.1 at 198 MHz: 16 kB I-Cache 16 kB D-Cache
|
|
Board: MOUSSE MPC8240/KAHLUA - CHRP (MAP B)
|
|
Built: Sep 10 2001 at 01:01:50
|
|
MPLD: Revision 127
|
|
Local Bus: 33 MHz
|
|
RTC: M48T589 TOD/NVRAM (8176) bytes
|
|
Current date/time: 9/10/2001 0:18:52
|
|
DRAM: 64 MB
|
|
FLASH: 1.960 MB
|
|
PCI: scanning bus0 ...
|
|
bus dev fn venID devID class rev MBAR0 MBAR1 IPIN ILINE
|
|
00 00 00 1057 0003 060000 11 00000008 00000000 01 00
|
|
00 0d 00 1011 0019 020000 41 80000001 80000000 01 01
|
|
00 0e 00 105a 4d38 018000 01 a0000001 a0001001 01 03
|
|
In: serial
|
|
Out: serial
|
|
Err: serial
|
|
|
|
Hit any key to stop autoboot: 0
|
|
=>
|
|
|
|
I. Root FileSystem/IP Configuration
|
|
|
|
bootcmd=tftp 100000 vmlinux.img;bootm
|
|
bootdelay=3
|
|
baudrate=9600
|
|
ipaddr=<IP ADDRESS>
|
|
netmask=<NETMASK>
|
|
hostname=<NAME>
|
|
serverip=<NFS SERVER IP ADDRESS>
|
|
ethaddr=00:00:10:20:30:44
|
|
nfsroot=<NFS SERVER IP ADDRESS>:/boot/root-fs
|
|
gateway=<IP ADDRESS>
|
|
root=/dev/nfs
|
|
stdin=serial
|
|
stdout=serial
|
|
stderr=serial
|
|
|
|
NVRAM environment variables.
|
|
|
|
use the command:
|
|
|
|
setenv <attribute> <value>
|
|
|
|
type "saveenv" to write to NVRAM.
|
|
|
|
|
|
II. To boot from a hard drive:
|
|
|
|
setenv root /dev/hda1
|
|
|
|
|
|
III. IP options which configure the network:
|
|
|
|
ipaddr=<IP ADDRESS OF MACHINE>
|
|
netmask=<NETMASK>
|
|
hostname=mousse
|
|
ethaddr=00:00:10:20:30:44
|
|
gateway=<IP ADDRESS OF GATEWAY/ROUTER>
|
|
|
|
|
|
IV. IP Options which configure NFS Root/Boot Support
|
|
|
|
root=/dev/nfs
|
|
serverip=<NFS SERVER IP ADDRESS>
|
|
nfsroot=<NFS SERVER IP ADDRESS>:/boot/root-fs
|
|
|
|
V. U-Boot Image Support
|
|
|
|
The U-Boot boot loader assumes that after you build
|
|
your kernel (vmlinux), you will create a U-Boot image
|
|
using the following commands or script:
|
|
|
|
#!/bin/csh
|
|
/bin/touch vmlinux.img
|
|
/bin/rm vmlinux.img
|
|
set path=($TOOLBASE/bin $path)
|
|
set path=($U_BOOT/tools $path)
|
|
powerpc-linux-objcopy -S -O binary vmlinux vmlinux.bin
|
|
gzip -vf vmlinux.bin
|
|
mkimage -A ppc -O linux -T kernel -C gzip -a 0 -e 0 -n vmlinux.bin.gz -d vmlinux.bin.gz vmlinux.img
|
|
ls -l vmlinux.img
|
|
|
|
|
|
VI. ONBOARD FLASH Support
|
|
|
|
FLASH support is provided for the onboard FLASH chip Bootrom area.
|
|
U-Boot is loaded into either the ROM boot region of the FLASH chip,
|
|
after first being boot-strapped from a pre-progammed AMD29F040 PLCC
|
|
bootrom. The PLCC needs to be programmed with a ROM burner using
|
|
AMD 29F040 ROM parts and the u-boot.bin or u-boot.hex (S-Record)
|
|
images.
|
|
|
|
The PLCC overlays this same region of flash as the onboard FLASH,
|
|
the jumper J100 is a chip-select for which flash chip you want to
|
|
progam. When jumper J100 is connected to pins 2-3, you boot from
|
|
PLCC FLASH.
|
|
|
|
To bringup a system, simply flash a flash an AMD29F040 PLCC
|
|
bootrom, and put this in the PLCC socket. Move jumper J100 to
|
|
pins 2-3 and boot from the PLCC.
|
|
|
|
|
|
Now, while the system is running, move Jumper J100 to
|
|
pins 1-2 and follow the procedure below to FLASH a bootrom
|
|
(u-boot.bin) image into the onboard bootrom region (AMD29LV160DB):
|
|
|
|
tftp 100000 u-boot.bin
|
|
protect off FFF00000 FFF7FFFF
|
|
erase FFF00000 FFF7FFFF
|
|
cp.b 100000 FFF00000 \${filesize}\
|
|
|
|
|
|
Here is an example:
|
|
|
|
=>tftp 100000 u-boot.bin
|
|
eth_halt
|
|
eth0: DC21143 Ethernet adapter(bus=0, device=13, func=0)
|
|
DEC Ethernet iobase=0x80000000
|
|
ARP broadcast 1
|
|
Filename 'u-boot.bin'.
|
|
Load address: 0x100000
|
|
Loading: #########################
|
|
done
|
|
Bytes transferred = 123220 (1e154 hex)
|
|
eth_halt
|
|
=>protect off FFF00000 FFF7FFFF
|
|
Un-Protected 8 sectors
|
|
=>erase FFF00000 FFF7FFFF
|
|
Erase Flash from 0xfff00000 to 0xfff7ffff
|
|
Erase FLASH[PLCC_BOOT] -8 sectors:........ done
|
|
Erased 8 sectors
|
|
=>cp.b 100000 FFF00000 1e154
|
|
Copy to Flash... FLASH[PLCC_BOOT]:..done
|
|
=>
|
|
|
|
|
|
B. FLASH RAMDISK REGION
|
|
|
|
FLASH support is provided for an Onboard 512K RAMDISK region.
|
|
|
|
TThe following commands will FLASH a bootrom (u-boot.bin) image
|
|
into the onboard FLASH region (AMD29LV160DB 2MB FLASH):
|
|
|
|
tftp 100000 u-boot.bin
|
|
protect off FFF80000 FFFFFFFF
|
|
erase FFF80000 FFFFFFFF
|
|
cp.b 100000 FFF80000 \${filesize}\
|
|
|
|
|
|
C. FLASH KERNEL REGION (960KB)
|
|
|
|
FLASH support is provided for the 960KB onboard FLASH1 segment.
|
|
This allows flashing of kernel images which U-Boot can load
|
|
and run (standalone) from the onboard FLASH chip. It also assumes
|
|
|
|
The following commands will FLASH a kernel image to 0xffe10000
|
|
|
|
tftp 100000 vmlinux.img
|
|
protect off FFE10000 FFEFFFFF
|
|
erase FFE10000 FFEFFFFF
|
|
cp.b 100000 FFE10000 \${filesize}\
|
|
reset
|
|
|
|
Here is an example:
|
|
|
|
|
|
=>tftp 100000 vmlinux.img
|
|
eth_halt
|
|
eth0: DC21143 Ethernet adapter(bus=0, device=13, func=0)
|
|
DEC Ethernet iobase=0x80000000
|
|
ARP broadcast 1
|
|
TFTP from server 209.128.93.133; our IP address is 209.128.93.138
|
|
Filename 'vmlinux.img'.
|
|
Load address: 0x100000
|
|
Loading: #####################################################################################################################################################
|
|
done
|
|
Bytes transferred = 760231 (b99a7 hex)
|
|
eth_halt
|
|
=>protect off FFE10000 FFEFFFFF
|
|
Un-Protected 15 sectors
|
|
=>erase FFE10000 FFEFFFFF
|
|
Erase Flash from 0xffe10000 to 0xffefffff
|
|
Erase FLASH[F0_SA3(KERNEL)] -15 sectors:............... done
|
|
Erased 15 sectors
|
|
=>cp.b 100000 FFE10000 b99a7
|
|
Copy to Flash... FLASH[F0_SA3(KERNEL)]:............done
|
|
=>
|
|
|
|
|
|
When finished, use the command:
|
|
|
|
bootm ffe10000
|
|
|
|
to start the kernel.
|
|
|
|
Finally, to make this the default boot command, use
|
|
the following commands:
|
|
|
|
setenv bootcmd bootm ffe10000
|
|
savenv
|
|
|
|
to make it automatically boot the kernel from FLASH.
|
|
|
|
|
|
To go back to development mode (NFS boot)
|
|
|
|
setenv bootcmd tftp 100000 vmlinux.img\;bootm
|
|
savenv
|
|
|
|
|
|
=>tftp 100000 vmlinux.img
|
|
eth0: DC21143 Ethernet adapter(bus=0, device=13, func=0)
|
|
DEC Ethernet iobase=0x80000000
|
|
ARP broadcast 1
|
|
Filename 'vmlinux.img'.
|
|
Load address: 0x100000
|
|
Loading: ####################################################################################################################################################
|
|
done
|
|
Bytes transferred = 752717 (b7c4d hex)
|
|
eth_halt
|
|
=>protect off FFE10000 FFEFFFFF
|
|
Un-Protected 15 sectors
|
|
=>erase FFE10000 FFEFFFFF
|
|
Erase Flash from 0xffe10000 to 0xffefffff
|
|
Erase FLASH[F0_SA3(KERNEL)] -15 sectors:............... done
|
|
Erased 15 sectors
|
|
=>cp.b 100000 FFE10000 b7c4d
|
|
Copy to Flash... FLASH[F0_SA3(KERNEL)]:............done
|
|
=>bootm ffe10000
|
|
## Booting image at ffe10000 ...
|
|
Image Name: vmlinux.bin.gz
|
|
Image Type: PowerPC Linux Kernel Image (gzip compressed)
|
|
Data Size: 752653 Bytes = 735 kB = 0 MB
|
|
Load Address: 00000000
|
|
Entry Point: 00000000
|
|
Verifying Checksum ... OK
|
|
Uncompressing Kernel Image ... OK
|
|
Total memory = 64MB; using 0kB for hash table (at 00000000)
|
|
Linux version 2.4.2_hhl20 (jfd@atlantis) (gcc version 2.95.2 19991024 (release)) #597 Wed Sep 5 23:23:23 PDT 2001
|
|
cpu0: MPC8240/KAHLUA : MOUSSE Platform : 64MB RAM: MPLD Rev. 7f
|
|
Sandpoint port (C) 2000, 2001 MontaVista Software, Inc. (source@mvista.com)
|
|
IP PNP: 802.3 Ethernet Address=<0:0:10:20:30:44>
|
|
NOTICE: mounting root file system via NFS
|
|
On node 0 totalpages: 16384
|
|
zone(0): 16384 pages.
|
|
zone(1): 0 pages.
|
|
zone(2): 0 pages.
|
|
time_init: decrementer frequency = 16.665914 MHz
|
|
time_init: MPC8240 PCI Bus frequency = 33.331828 MHz
|
|
Calibrating delay loop... 133.12 BogoMIPS
|
|
Memory: 62436k available (1336k kernel code, 500k data, 88k init, 0k highmem)
|
|
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
|
|
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
|
|
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
|
|
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
|
|
POSIX conformance testing by UNIFIX
|
|
PCI: Probing PCI hardware
|
|
Linux NET4.0 for Linux 2.4
|
|
Based upon Swansea University Computer Society NET3.039
|
|
Initializing RT netlink socket
|
|
Starting kswapd v1.8
|
|
pty: 256 Unix98 ptys configured
|
|
block: queued sectors max/low 41394kB/13798kB, 128 slots per queue
|
|
Uniform Multi-Platform E-IDE driver Revision: 6.31
|
|
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
|
|
PDC20262: IDE controller on PCI bus 00 dev 70
|
|
PDC20262: chipset revision 1
|
|
PDC20262: not 100% native mode: will probe irqs later
|
|
PDC20262: ROM enabled at 0x000d0000
|
|
PDC20262: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
|
|
PDC20262: FORCING BURST BIT 0x00 -> 0x01 ACTIVE
|
|
PDC20262: irq=3 dev->irq=3
|
|
ide0: BM-DMA at 0xbfff00-0xbfff07, BIOS settings: hda:DMA, hdb:DMA
|
|
ide1: BM-DMA at 0xbfff08-0xbfff0f, BIOS settings: hdc:pio, hdd:pio
|
|
hda: WDC WD300AB-00BVA0, ATA DISK drive
|
|
hdc: SONY CD-RW CRX160E, ATAPI CD/DVD-ROM drive
|
|
ide0 at 0xbfff78-0xbfff7f,0xbfff76 on irq 3
|
|
ide1 at 0xbfff68-0xbfff6f,0xbfff66 on irq 3
|
|
hda: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(66)
|
|
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache
|
|
Uniform CD-ROM driver Revision: 3.12
|
|
Partition check:
|
|
/dev/ide/host0/bus0/target0/lun0: p1 p2
|
|
hd: unable to get major 3 for hard disk
|
|
udf: registering filesystem
|
|
loop: loaded (max 8 devices)
|
|
Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
|
|
ttyS00 at 0xffe08080 (irq = 4) is a ST16650
|
|
Linux Tulip driver version 0.9.13a (January 20, 2001)
|
|
eth0: Digital DS21143 Tulip rev 65 at 0xbfff80, EEPROM not present, 00:00:10:20:30:44, IRQ 1.
|
|
eth0: MII transceiver #0 config 3000 status 7829 advertising 01e1.
|
|
NET4: Linux TCP/IP 1.0 for NET4.0
|
|
IP Protocols: ICMP, UDP, TCP
|
|
IP: routing cache hash table of 512 buckets, 4Kbytes
|
|
TCP: Hash tables configured (established 4096 bind 4096)
|
|
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
|
|
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
|
|
devfs: boot_options: 0x0
|
|
VFS: Mounted root (nfs filesystem).
|
|
Mounted devfs on /dev
|
|
Freeing unused kernel memory: 88k init 4k openfirmware
|
|
eth0: Setting full-duplex based on MII#0 link partner capability of 45e1.
|
|
INIT: version 2.78 booting
|
|
INIT: Entering runlevel: 2
|
|
|
|
|
|
Welcome to Linux/PPC
|
|
MPC8240/MOUSSE
|
|
|
|
|
|
mousse login: root
|
|
Password:
|
|
PAM_unix[13]: (login) session opened for user root by LOGIN(uid=0)
|
|
Last login: Thu Sep 6 00:16:51 2001 on console
|
|
|
|
|
|
Welcome to Linux/PPC
|
|
MPC8240/MOUSSE
|
|
|
|
|
|
mousse#
|