u-boot-brain/arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts
David Woodhouse 3fad1ca28d board: mediatek: Add support for UniElec U7623 board
This is an MT7623A-based board, very similar to the Banana Pi R2.

http://www.unielecinc.com/q/news/cn/p/product/detail.html?qd_guid=OjXwKCaRlN

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-07-29 08:43:40 -04:00

212 lines
3.5 KiB
Plaintext

/*
* Copyright (C) 2018 MediaTek Inc.
* Author: Ryder Lee <ryder.lee@mediatek.com>
*
* SPDX-License-Identifier: (GPL-2.0 OR MIT)
*/
/dts-v1/;
#include "mt7623.dtsi"
#include "mt7623-u-boot.dtsi"
/ {
model = "UniElec U7623-02 eMMC";
compatible = "unielec,u7623-02-emmc", "mediatek,mt7623";
memory@80000000 {
device_type = "memory";
reg = <0 0x80000000 0 0x20000000>;
};
chosen {
stdout-path = &uart2;
tick-timer = &timer0;
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_5v: regulator-5v {
compatible = "regulator-fixed";
regulator-name = "fixed-5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
};
leds {
compatible = "gpio-leds";
led3 {
label = "u7623-01:green:led3";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led4 {
label = "u7623-01:green:led4";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
};
&eth {
status = "okay";
mediatek,gmac-id = <0>;
phy-mode = "rgmii";
mediatek,switch = "mt7530";
mediatek,mcm;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_default>;
status = "okay";
bus-width = <8>;
max-frequency = <50000000>;
cap-mmc-highspeed;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
non-removable;
};
&pinctrl {
ephy_default: ephy_default {
mux {
function = "eth";
groups = "mdc_mdio", "ephy";
};
conf {
pins = "G2_TXEN", "G2_TXD0", "G2_TXD1", "G2_TXD2",
"G2_TXD3", "G2_TXC", "G2_RXC", "G2_RXD0",
"G2_RXD1", "G2_RXD2", "G2_RXD3", "G2_RXDV",
"MDC", "MDIO";
drive-strength = <12>;
mediatek,tdsel = <5>;
};
};
mmc0_pins_default: mmc0default {
mux {
function = "msdc";
groups = "msdc0";
};
conf-cmd-data {
pins = "MSDC0_CMD", "MSDC0_DAT0", "MSDC0_DAT1",
"MSDC0_DAT2", "MSDC0_DAT3", "MSDC0_DAT4",
"MSDC0_DAT5", "MSDC0_DAT6", "MSDC0_DAT7";
input-enable;
bias-pull-up;
};
conf-clk {
pins = "MSDC0_CLK";
bias-pull-down;
};
conf-rst {
pins = "MSDC0_RSTB";
bias-pull-up;
};
};
pcie_default: pcie-default {
mux {
function = "pcie";
groups = "pcie0_0_perst", "pcie1_0_perst";
};
};
uart0_pins_a: uart0-default {
mux {
function = "uart";
groups = "uart0_0_txd_rxd";
};
};
uart1_pins_a: uart1-default {
mux {
function = "uart";
groups = "uart1_0_txd_rxd";
};
};
uart2_pins_a: uart2-default {
mux {
function = "uart";
groups = "uart2_0_txd_rxd";
};
};
uart2_pins_b: uart2-alt {
mux {
function = "uart";
groups = "uart2_1_txd_rxd";
};
};
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pcie_default>;
status = "okay";
pcie@0,0 {
status = "okay";
};
pcie@1,0 {
status = "okay";
};
};
&pcie0_phy {
status = "okay";
};
&pcie1_phy {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_a>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins_b>;
status = "okay";
};