mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-23 10:28:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
307 lines
9.5 KiB
C
307 lines
9.5 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian@popies.net>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
* Ilko Iliev <www.ronetix.at>
|
|
*
|
|
* Configuation settings for the RONETIX PM9263 board.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* SoC must be defined first, before hardware.h is included.
|
|
* In this case SoC is defined in boards.cfg.
|
|
*/
|
|
#include <asm/hardware.h>
|
|
|
|
/* ARM asynchronous clock */
|
|
|
|
#define MASTER_PLL_DIV 6
|
|
#define MASTER_PLL_MUL 65
|
|
#define MAIN_PLL_DIV 2 /* 2 or 4 */
|
|
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
|
|
|
|
#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9263"
|
|
#define CONFIG_ARCH_CPU_INIT
|
|
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_PM9263
|
|
|
|
/* clocks */
|
|
#define CONFIG_SYS_MOR_VAL \
|
|
(AT91_PMC_MOR_MOSCEN | \
|
|
(255 << 8)) /* Main Oscillator Start-up Time */
|
|
#define CONFIG_SYS_PLLAR_VAL \
|
|
(AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \
|
|
AT91_PMC_PLLXR_OUT(3) | \
|
|
AT91_PMC_PLLXR_PLLCOUNT(0x3f) | /* PLL Counter */\
|
|
(2 << 28) | /* PLL Clock Frequency Range */ \
|
|
((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
|
|
|
|
#if (MAIN_PLL_DIV == 2)
|
|
/* PCK/2 = MCK Master Clock from PLLA */
|
|
#define CONFIG_SYS_MCKR1_VAL \
|
|
(AT91_PMC_MCKR_CSS_SLOW | \
|
|
AT91_PMC_MCKR_PRES_1 | \
|
|
AT91_PMC_MCKR_MDIV_2)
|
|
/* PCK/2 = MCK Master Clock from PLLA */
|
|
#define CONFIG_SYS_MCKR2_VAL \
|
|
(AT91_PMC_MCKR_CSS_PLLA | \
|
|
AT91_PMC_MCKR_PRES_1 | \
|
|
AT91_PMC_MCKR_MDIV_2)
|
|
#else
|
|
/* PCK/4 = MCK Master Clock from PLLA */
|
|
#define CONFIG_SYS_MCKR1_VAL \
|
|
(AT91_PMC_MCKR_CSS_SLOW | \
|
|
AT91_PMC_MCKR_PRES_1 | \
|
|
AT91_PMC_MCKR_MDIV_4)
|
|
/* PCK/4 = MCK Master Clock from PLLA */
|
|
#define CONFIG_SYS_MCKR2_VAL \
|
|
(AT91_PMC_MCKR_CSS_PLLA | \
|
|
AT91_PMC_MCKR_PRES_1 | \
|
|
AT91_PMC_MCKR_MDIV_4)
|
|
#endif
|
|
/* define PDC[31:16] as DATA[31:16] */
|
|
#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000
|
|
/* no pull-up for D[31:16] */
|
|
#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000
|
|
/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
|
|
#define CONFIG_SYS_MATRIX_EBI0CSA_VAL \
|
|
(AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \
|
|
AT91_MATRIX_CSA_EBI_CS1A)
|
|
|
|
/* SDRAM */
|
|
/* SDRAMC_MR Mode register */
|
|
#define CONFIG_SYS_SDRC_MR_VAL1 0
|
|
/* SDRAMC_TR - Refresh Timer register */
|
|
#define CONFIG_SYS_SDRC_TR_VAL1 0x3AA
|
|
/* SDRAMC_CR - Configuration register*/
|
|
#define CONFIG_SYS_SDRC_CR_VAL \
|
|
(AT91_SDRAMC_NC_9 | \
|
|
AT91_SDRAMC_NR_13 | \
|
|
AT91_SDRAMC_NB_4 | \
|
|
AT91_SDRAMC_CAS_2 | \
|
|
AT91_SDRAMC_DBW_32 | \
|
|
(2 << 8) | /* tWR - Write Recovery Delay */ \
|
|
(7 << 12) | /* tRC - Row Cycle Delay */ \
|
|
(2 << 16) | /* tRP - Row Precharge Delay */ \
|
|
(2 << 20) | /* tRCD - Row to Column Delay */ \
|
|
(5 << 24) | /* tRAS - Active to Precharge Delay */ \
|
|
(8 << 28)) /* tXSR - Exit Self Refresh to Active Delay */
|
|
|
|
/* Memory Device Register -> SDRAM */
|
|
#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM
|
|
#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE
|
|
#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH
|
|
#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR
|
|
#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL
|
|
#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */
|
|
#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */
|
|
|
|
/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
|
|
#define CONFIG_SYS_SMC0_SETUP0_VAL \
|
|
(AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \
|
|
AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
|
|
#define CONFIG_SYS_SMC0_PULSE0_VAL \
|
|
(AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \
|
|
AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
|
|
#define CONFIG_SYS_SMC0_CYCLE0_VAL \
|
|
(AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
|
|
#define CONFIG_SYS_SMC0_MODE0_VAL \
|
|
(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \
|
|
AT91_SMC_MODE_DBW_16 | \
|
|
AT91_SMC_MODE_TDF | \
|
|
AT91_SMC_MODE_TDF_CYCLE(6))
|
|
|
|
/* user reset enable */
|
|
#define CONFIG_SYS_RSTC_RMR_VAL \
|
|
(AT91_RSTC_KEY | \
|
|
AT91_RSTC_CR_PROCRST | \
|
|
AT91_RSTC_MR_ERSTL(1) | \
|
|
AT91_RSTC_MR_ERSTL(2))
|
|
|
|
/* Disable Watchdog */
|
|
#define CONFIG_SYS_WDTC_WDMR_VAL \
|
|
(AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \
|
|
AT91_WDT_MR_WDV(0xfff) | \
|
|
AT91_WDT_MR_WDDIS | \
|
|
AT91_WDT_MR_WDD(0xfff))
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
#undef CONFIG_SKIP_LOWLEVEL_INIT
|
|
#define CONFIG_USER_LOWLEVEL_INIT 1
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
/* LCD */
|
|
#define LCD_BPP LCD_COLOR8
|
|
#define CONFIG_LCD_LOGO 1
|
|
#undef LCD_TEST_PATTERN
|
|
#define CONFIG_LCD_INFO 1
|
|
#define CONFIG_LCD_INFO_BELOW_LOGO 1
|
|
#define CONFIG_ATMEL_LCD 1
|
|
#define CONFIG_ATMEL_LCD_BGR555 1
|
|
|
|
#define CONFIG_LCD_IN_PSRAM 1
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE 1
|
|
|
|
/* SDRAM */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM 0x20000000
|
|
#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
|
|
|
|
/* NOR flash, if populated */
|
|
#define CONFIG_SYS_FLASH_CFI 1
|
|
#define CONFIG_FLASH_CFI_DRIVER 1
|
|
#define PHYS_FLASH_1 0x10000000
|
|
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 256
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
|
|
/* NAND flash */
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_NAND_ATMEL
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_DBW_8 1
|
|
/* our ALE is AD21 */
|
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
|
/* our CLE is AD22 */
|
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
|
|
#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PB(30)
|
|
|
|
#endif
|
|
|
|
#define CONFIG_JFFS2_CMDLINE 1
|
|
#define CONFIG_JFFS2_NAND 1
|
|
#define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */
|
|
#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */
|
|
#define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition size*/
|
|
|
|
/* PSRAM */
|
|
#define PHYS_PSRAM 0x70000000
|
|
#define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */
|
|
/* Slave EBI1, PSRAM connected */
|
|
#define CONFIG_PSRAM_SCFG (AT91_MATRIX_SCFG_ARBT_FIXED_PRIORITY | \
|
|
AT91_MATRIX_SCFG_FIXED_DEFMSTR(5) | \
|
|
AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED | \
|
|
AT91_MATRIX_SCFG_SLOT_CYCLE(255))
|
|
|
|
/* Ethernet */
|
|
#define CONFIG_MACB 1
|
|
#define CONFIG_RMII 1
|
|
#define CONFIG_NET_RETRY_COUNT 20
|
|
#define CONFIG_RESET_PHY_R 1
|
|
|
|
/* USB */
|
|
#define CONFIG_USB_ATMEL
|
|
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
|
|
#define CONFIG_USB_OHCI_NEW 1
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
|
|
#define CONFIG_SYS_MEMTEST_END 0x23e00000
|
|
|
|
#define CONFIG_SYS_USE_FLASH 1
|
|
#undef CONFIG_SYS_USE_DATAFLASH
|
|
#undef CONFIG_SYS_USE_NANDFLASH
|
|
|
|
#ifdef CONFIG_SYS_USE_DATAFLASH
|
|
|
|
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
|
|
#define CONFIG_ENV_OFFSET 0x4200
|
|
#define CONFIG_ENV_SIZE 0x4200
|
|
#define CONFIG_ENV_SECT_SIZE 0x210
|
|
#define CONFIG_ENV_SPI_MAX_HZ 15000000
|
|
#define CONFIG_BOOTCOMMAND "sf probe 0; " \
|
|
"sf read 0x22000000 0x84000 0x294000; " \
|
|
"bootm 0x22000000"
|
|
|
|
#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */
|
|
|
|
/* bootstrap + u-boot + env + linux in nandflash */
|
|
#define CONFIG_ENV_OFFSET 0x60000
|
|
#define CONFIG_ENV_OFFSET_REDUND 0x80000
|
|
#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
|
|
#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
|
|
|
|
#elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */
|
|
|
|
#define CONFIG_ENV_OFFSET 0x40000
|
|
#define CONFIG_ENV_SECT_SIZE 0x10000
|
|
#define CONFIG_ENV_SIZE 0x10000
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
|
|
/* JFFS Partition offset set */
|
|
#define CONFIG_SYS_JFFS2_FIRST_BANK 0
|
|
#define CONFIG_SYS_JFFS2_NUM_BANKS 1
|
|
|
|
/* 512k reserved for u-boot */
|
|
#define CONFIG_SYS_JFFS2_FIRST_SECTOR 11
|
|
|
|
#define CONFIG_BOOTCOMMAND "run flashboot"
|
|
#define CONFIG_ROOTPATH "/ronetix/rootfs"
|
|
|
|
#define CONFIG_CON_ROT "fbcon=rotate:3 "
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
|
|
"partition=nand0,0\0" \
|
|
"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
CONFIG_CON_ROT \
|
|
"nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \
|
|
"addip=setenv bootargs $(bootargs) " \
|
|
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
|
|
":$(hostname):eth0:off\0" \
|
|
"ramboot=tftpboot 0x22000000 vmImage;" \
|
|
"run ramargs;run addip;bootm 22000000\0" \
|
|
"nfsboot=tftpboot 0x22000000 vmImage;" \
|
|
"run nfsargs;run addip;bootm 22000000\0" \
|
|
"flashboot=run ramargs;run addip;bootm 0x10050000\0" \
|
|
""
|
|
|
|
#else
|
|
#error "Undefined memory device"
|
|
#endif
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
|
|
#endif
|