mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-23 10:28:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
106 lines
2.7 KiB
C
106 lines
2.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
|
|
*
|
|
* Based on dockstar.h originally written by
|
|
* Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
|
|
*
|
|
* Based on sheevaplug.h originally written by
|
|
* Prafulla Wadaskar <prafulla@marvell.com>
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
*/
|
|
|
|
#ifndef _CONFIG_GOFLEXHOME_H
|
|
#define _CONFIG_GOFLEXHOME_H
|
|
|
|
/*
|
|
* High Level Configuration Options (easy to change)
|
|
*/
|
|
#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
|
|
#define CONFIG_KW88F6281 1 /* SOC Name */
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
|
|
|
|
/*
|
|
* Default GPIO configuration and LED status
|
|
*/
|
|
#define GOFLEXHOME_OE_LOW (~(0))
|
|
#define GOFLEXHOME_OE_HIGH (~(0))
|
|
#define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */
|
|
#define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */
|
|
|
|
/* PHY related */
|
|
#define MV88E1116_LED_FCTRL_REG 10
|
|
#define MV88E1116_CPRSP_CR3_REG 21
|
|
#define MV88E1116_MAC_CTRL_REG 21
|
|
#define MV88E1116_PGADR_REG 22
|
|
#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
|
|
#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
|
|
|
|
/*
|
|
* Commands configuration
|
|
*/
|
|
|
|
#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */
|
|
|
|
/*
|
|
* mv-common.h should be defined after CMD configs since it used them
|
|
* to enable certain macros
|
|
*/
|
|
#include "mv-common.h"
|
|
|
|
/*
|
|
* Environment variables configurations
|
|
*/
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
|
|
#endif
|
|
/*
|
|
* max 4k env size is enough, but in case of nand
|
|
* it has to be rounded to sector size
|
|
*/
|
|
#define CONFIG_ENV_SIZE 0x20000 /* 128k */
|
|
#define CONFIG_ENV_ADDR 0xC0000
|
|
#define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */
|
|
|
|
/*
|
|
* Default environment variables
|
|
*/
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
|
|
"ubi part root; " \
|
|
"ubifsmount ubi:root; " \
|
|
"ubifsload 0x800000 ${kernel}; " \
|
|
"bootm 0x800000"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"console=console=ttyS0,115200\0" \
|
|
"mtdids=nand0=orion_nand\0" \
|
|
"mtdparts="CONFIG_MTDPARTS_DEFAULT \
|
|
"kernel=/boot/uImage\0" \
|
|
"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
|
|
|
|
/*
|
|
* Ethernet Driver configuration
|
|
*/
|
|
#ifdef CONFIG_CMD_NET
|
|
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
|
|
#define CONFIG_PHY_BASE_ADR 0
|
|
#endif /* CONFIG_CMD_NET */
|
|
|
|
/*
|
|
* * SATA Driver configuration
|
|
* */
|
|
#ifdef CONFIG_MVSATA_IDE
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
|
|
#endif /*CONFIG_MVSATA_IDE*/
|
|
|
|
/*
|
|
* * RTC driver configuration
|
|
* */
|
|
#ifdef CONFIG_CMD_DATE
|
|
#define CONFIG_RTC_MV
|
|
#endif /* CONFIG_CMD_DATE */
|
|
|
|
#endif /* _CONFIG_GOFLEXHOME_H */
|