mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 14:28:52 +09:00
![Sascha Laue](/assets/img/avatar_default.png)
This patch brings the lwmon5 board support up-to-date. Here a summary of the changes: lwmon5 board port related: - GPIO's changed to control the LSB transmitter - Reset USB PHY's upon power-up - Enable CAN upon power-up - USB init error workaround (errata CHIP_6) - EBC: Enable burstmode and modify the timings for the GDC memory - EBC: Speed up NOR flash timings lwmon5 board POST related: - Add FPGA memory test - Add GDC memory test - DSP POST reworked - SYSMON POST: Fix handling of negative temperatures - Add output for sysmon1 POST - HW-watchdog min. time test reworked Additionally some coding-style changes were done. Signed-off-by: Sascha Laue <sascha.laue@liebherr.com> Signed-off-by: Stefan Roese <sr@denx.de>
497 lines
13 KiB
C
497 lines
13 KiB
C
/*
|
|
* (C) Copyright 2007-2010
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <asm/ppc440.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/ppc4xx-gpio.h>
|
|
#include <asm/io.h>
|
|
#include <post.h>
|
|
#include <flash.h>
|
|
#include <mtd/cfi_flash.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static phys_addr_t lwmon5_cfi_flash_bank_addr[2] = CONFIG_SYS_FLASH_BANKS_LIST;
|
|
|
|
ulong flash_get_size(ulong base, int banknum);
|
|
int misc_init_r_kbd(void);
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
u32 sdr0_pfc1, sdr0_pfc2;
|
|
u32 reg;
|
|
|
|
/* PLB Write pipelining disabled. Denali Core workaround */
|
|
mtdcr(PLB4A0_ACR, 0xDE000000);
|
|
mtdcr(PLB4A1_ACR, 0xDE000000);
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup the interrupt controller polarities, triggers, etc.
|
|
*-------------------------------------------------------------------*/
|
|
mtdcr(UIC0SR, 0xffffffff); /* clear all. if write with 1 then the status is cleared */
|
|
mtdcr(UIC0ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC0CR, 0x00000000); /* we have not critical interrupts at the moment */
|
|
mtdcr(UIC0PR, 0xFFBFF1EF); /* Adjustment of the polarity */
|
|
mtdcr(UIC0TR, 0x00000900); /* per ref-board manual */
|
|
mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
|
|
mtdcr(UIC0SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC1ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC1CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC1PR, 0xFFFFC6A5); /* Adjustment of the polarity */
|
|
mtdcr(UIC1TR, 0x60000040); /* per ref-board manual */
|
|
mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
|
|
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC2SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC2ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC2CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC2PR, 0x27C00000); /* Adjustment of the polarity */
|
|
mtdcr(UIC2TR, 0x3C000000); /* per ref-board manual */
|
|
mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
|
|
mtdcr(UIC2SR, 0xffffffff); /* clear all */
|
|
|
|
/* Trace Pins are disabled. SDR0_PFC0 Register */
|
|
mtsdr(SDR0_PFC0, 0x0);
|
|
|
|
/* select Ethernet pins */
|
|
mfsdr(SDR0_PFC1, sdr0_pfc1);
|
|
/* SMII via ZMII */
|
|
sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
|
|
SDR0_PFC1_SELECT_CONFIG_6;
|
|
mfsdr(SDR0_PFC2, sdr0_pfc2);
|
|
sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
|
|
SDR0_PFC2_SELECT_CONFIG_6;
|
|
|
|
/* enable SPI (SCP) */
|
|
sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_SCP_SEL;
|
|
|
|
mtsdr(SDR0_PFC2, sdr0_pfc2);
|
|
mtsdr(SDR0_PFC1, sdr0_pfc1);
|
|
|
|
mtsdr(SDR0_PFC4, 0x80000000);
|
|
|
|
/* PCI arbiter disabled */
|
|
/* PCI Host Configuration disbaled */
|
|
mfsdr(SDR0_PCI0, reg);
|
|
reg = 0;
|
|
mtsdr(SDR0_PCI0, 0x00000000 | reg);
|
|
|
|
gpio_write_bit(CONFIG_SYS_GPIO_FLASH_WP, 1);
|
|
|
|
#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
|
|
/* enable the LSB transmitter */
|
|
gpio_write_bit(CONFIG_SYS_GPIO_LSB_ENABLE, 1);
|
|
/* enable the CAN transmitter */
|
|
gpio_write_bit(CONFIG_SYS_GPIO_CAN_ENABLE, 1);
|
|
|
|
reg = 0; /* reuse as counter */
|
|
out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
|
|
in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR)
|
|
& ~CONFIG_SYS_DSPIC_TEST_MASK);
|
|
while (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY) && reg++ < 1000) {
|
|
udelay(1000);
|
|
}
|
|
if (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY)) {
|
|
/* set "boot error" flag */
|
|
out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
|
|
in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) |
|
|
CONFIG_SYS_DSPIC_TEST_MASK);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Reset PHY's:
|
|
* The PHY's need a 2nd reset pulse, since the MDIO address is latched
|
|
* upon reset, and with the first reset upon powerup, the addresses are
|
|
* not latched reliable, since the IRQ line is multiplexed with an
|
|
* MDIO address. A 2nd reset at this time will make sure, that the
|
|
* correct address is latched.
|
|
*/
|
|
gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1);
|
|
gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1);
|
|
udelay(1000);
|
|
gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 0);
|
|
gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 0);
|
|
udelay(1000);
|
|
gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1);
|
|
gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Override weak default with board specific version
|
|
*/
|
|
phys_addr_t cfi_flash_bank_addr(int bank)
|
|
{
|
|
return lwmon5_cfi_flash_bank_addr[bank];
|
|
}
|
|
|
|
/*
|
|
* Override the weak default mapping function with a board specific one
|
|
*/
|
|
u32 flash_get_bank_size(int cs, int idx)
|
|
{
|
|
return flash_info[idx].size;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
u32 val0, val1;
|
|
|
|
/*
|
|
* lwmon5 is manufactured in 2 different board versions:
|
|
* The lwmon5a board has 64MiB NOR flash instead of the
|
|
* 128MiB of the original lwmon5. Unfortunately the CFI driver
|
|
* will report 2 banks of 64MiB even for the smaller flash
|
|
* chip, since the bank is mirrored. To fix this, we bring
|
|
* one bank into CFI query mode and read its response. This
|
|
* enables us to detect the real number of flash devices/
|
|
* banks which will be used later on by the common CFI driver.
|
|
*/
|
|
|
|
/* Put bank 0 into CFI command mode and read */
|
|
out_be32((void *)CONFIG_SYS_FLASH0, 0x00980098);
|
|
val0 = in_be32((void *)CONFIG_SYS_FLASH0 + FLASH_OFFSET_CFI_RESP);
|
|
val1 = in_be32((void *)CONFIG_SYS_FLASH1 + FLASH_OFFSET_CFI_RESP);
|
|
|
|
/* Reset flash again out of query mode */
|
|
out_be32((void *)CONFIG_SYS_FLASH0, 0x00f000f0);
|
|
|
|
/* When not identical, we have 2 different flash devices/banks */
|
|
if (val0 != val1)
|
|
return 0;
|
|
|
|
/*
|
|
* Now we're sure that we're running on a LWMON5a board with
|
|
* only 64MiB NOR flash in one bank:
|
|
*
|
|
* Set flash base address and bank count for CFI driver probing.
|
|
*/
|
|
cfi_flash_num_flash_banks = 1;
|
|
lwmon5_cfi_flash_bank_addr[0] = CONFIG_SYS_FLASH0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
u32 pbcr;
|
|
int size_val = 0;
|
|
u32 reg;
|
|
unsigned long usb2d0cr = 0;
|
|
unsigned long usb2phy0cr, usb2h0cr = 0;
|
|
unsigned long sdr0_pfc1, sdr0_srst;
|
|
|
|
/*
|
|
* FLASH stuff...
|
|
*/
|
|
|
|
/* Re-do sizing to get full correct info */
|
|
|
|
/* adjust flash start and offset */
|
|
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
|
|
gd->bd->bi_flashoffset = 0;
|
|
|
|
mfebc(PB0CR, pbcr);
|
|
size_val = ffs(gd->bd->bi_flashsize) - 21;
|
|
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
|
|
mtebc(PB0CR, pbcr);
|
|
|
|
/*
|
|
* Re-check to get correct base address
|
|
*/
|
|
flash_get_size(gd->bd->bi_flashstart, 0);
|
|
|
|
/* Monitor protection ON by default */
|
|
flash_protect(FLAG_PROTECT_SET, -CONFIG_SYS_MONITOR_LEN, 0xffffffff,
|
|
&flash_info[cfi_flash_num_flash_banks - 1]);
|
|
|
|
/* Env protection ON by default */
|
|
flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
|
|
CONFIG_ENV_ADDR_REDUND + 2 * CONFIG_ENV_SECT_SIZE - 1,
|
|
&flash_info[cfi_flash_num_flash_banks - 1]);
|
|
|
|
/*
|
|
* USB suff...
|
|
*/
|
|
|
|
/* Reset USB */
|
|
/* Reset of USB2PHY0 must be active at least 10 us */
|
|
mtsdr(SDR0_SRST0, SDR0_SRST0_USB2H | SDR0_SRST0_USB2D);
|
|
udelay(2000);
|
|
|
|
mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY | SDR0_SRST1_USB2HUTMI |
|
|
SDR0_SRST1_USB2HPHY | SDR0_SRST1_OPBA2 |
|
|
SDR0_SRST1_PLB42OPB1 | SDR0_SRST1_OPB2PLB40);
|
|
udelay(2000);
|
|
|
|
/* Errata CHIP_6 */
|
|
|
|
/* 1. Set internal PHY configuration */
|
|
/* SDR Setting */
|
|
mfsdr(SDR0_PFC1, sdr0_pfc1);
|
|
mfsdr(SDR0_USB0, usb2d0cr);
|
|
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
|
mfsdr(SDR0_USB2H0CR, usb2h0cr);
|
|
|
|
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
|
|
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_WDINT_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/
|
|
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/
|
|
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
|
|
usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
|
|
|
|
/*
|
|
* An 8-bit/60MHz interface is the only possible alternative
|
|
* when connecting the Device to the PHY
|
|
*/
|
|
usb2h0cr = usb2h0cr & ~SDR0_USB2H0CR_WDINT_MASK;
|
|
usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/
|
|
|
|
mtsdr(SDR0_PFC1, sdr0_pfc1);
|
|
mtsdr(SDR0_USB0, usb2d0cr);
|
|
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
|
mtsdr(SDR0_USB2H0CR, usb2h0cr);
|
|
|
|
/* 2. De-assert internal PHY reset */
|
|
mfsdr(SDR0_SRST1, sdr0_srst);
|
|
sdr0_srst = sdr0_srst & ~SDR0_SRST1_USB20PHY;
|
|
mtsdr(SDR0_SRST1, sdr0_srst);
|
|
|
|
/* 3. Wait for more than 1 ms */
|
|
udelay(2000);
|
|
|
|
/* 4. De-assert USB 2.0 Host main reset */
|
|
mfsdr(SDR0_SRST0, sdr0_srst);
|
|
sdr0_srst = sdr0_srst &~ SDR0_SRST0_USB2H;
|
|
mtsdr(SDR0_SRST0, sdr0_srst);
|
|
udelay(1000);
|
|
|
|
/* 5. De-assert reset of OPB2 cores */
|
|
mfsdr(SDR0_SRST1, sdr0_srst);
|
|
sdr0_srst = sdr0_srst &~ SDR0_SRST1_PLB42OPB1;
|
|
sdr0_srst = sdr0_srst &~ SDR0_SRST1_OPB2PLB40;
|
|
sdr0_srst = sdr0_srst &~ SDR0_SRST1_OPBA2;
|
|
mtsdr(SDR0_SRST1, sdr0_srst);
|
|
udelay(1000);
|
|
|
|
/* 6. Set EHCI Configure FLAG */
|
|
|
|
/* 7. Reassert internal PHY reset: */
|
|
mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY);
|
|
udelay(1000);
|
|
|
|
/*
|
|
* Clear resets
|
|
*/
|
|
mtsdr(SDR0_SRST1, 0x00000000);
|
|
mtsdr(SDR0_SRST0, 0x00000000);
|
|
|
|
printf("USB: Host(int phy) Device(ext phy)\n");
|
|
|
|
/*
|
|
* Clear PLB4A0_ACR[WRP]
|
|
* This fix will make the MAL burst disabling patch for the Linux
|
|
* EMAC driver obsolete.
|
|
*/
|
|
reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK;
|
|
mtdcr(PLB4A0_ACR, reg);
|
|
|
|
/*
|
|
* Init matrix keyboard
|
|
*/
|
|
misc_init_r_kbd();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
char *s = getenv("serial#");
|
|
|
|
puts("Board: lwmon5");
|
|
|
|
if (s != NULL) {
|
|
puts(", serial# ");
|
|
puts(s);
|
|
}
|
|
putc('\n');
|
|
|
|
return (0);
|
|
}
|
|
|
|
void hw_watchdog_reset(void)
|
|
{
|
|
int val;
|
|
#if defined(CONFIG_WD_MAX_RATE)
|
|
unsigned long long ct = get_ticks();
|
|
|
|
/*
|
|
* Don't allow watch-dog triggering more frequently than
|
|
* the predefined value CONFIG_WD_MAX_RATE [ticks].
|
|
*/
|
|
if (ct >= gd->wdt_last) {
|
|
if ((ct - gd->wdt_last) < CONFIG_WD_MAX_RATE)
|
|
return;
|
|
} else {
|
|
/* Time base counter had been reset */
|
|
if (((unsigned long long)(-1) - gd->wdt_last + ct) <
|
|
CONFIG_WD_MAX_RATE)
|
|
return;
|
|
}
|
|
gd->wdt_last = get_ticks();
|
|
#endif
|
|
|
|
/*
|
|
* Toggle watchdog output
|
|
*/
|
|
val = gpio_read_out_bit(CONFIG_SYS_GPIO_WATCHDOG) == 0 ? 1 : 0;
|
|
gpio_write_bit(CONFIG_SYS_GPIO_WATCHDOG, val);
|
|
}
|
|
|
|
int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
if (argc < 2)
|
|
return cmd_usage(cmdtp);
|
|
|
|
if ((strcmp(argv[1], "on") == 0))
|
|
gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 1);
|
|
else if ((strcmp(argv[1], "off") == 0))
|
|
gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 0);
|
|
else
|
|
return cmd_usage(cmdtp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
eepromwp, 2, 0, do_eeprom_wp,
|
|
"eeprom write protect off/on",
|
|
"<on|off> - enable (on) or disable (off) I2C EEPROM write protect"
|
|
);
|
|
|
|
#if defined(CONFIG_VIDEO)
|
|
#include <video_fb.h>
|
|
#include <mb862xx.h>
|
|
|
|
extern GraphicDevice mb862xx;
|
|
|
|
static const gdc_regs init_regs [] = {
|
|
{ 0x0100, 0x00000f00 },
|
|
{ 0x0020, 0x801401df },
|
|
{ 0x0024, 0x00000000 },
|
|
{ 0x0028, 0x00000000 },
|
|
{ 0x002c, 0x00000000 },
|
|
{ 0x0110, 0x00000000 },
|
|
{ 0x0114, 0x00000000 },
|
|
{ 0x0118, 0x01df0280 },
|
|
{ 0x0004, 0x031f0000 },
|
|
{ 0x0008, 0x027f027f },
|
|
{ 0x000c, 0x015f028f },
|
|
{ 0x0010, 0x020c0000 },
|
|
{ 0x0014, 0x01df01ea },
|
|
{ 0x0018, 0x00000000 },
|
|
{ 0x001c, 0x01e00280 },
|
|
{ 0x0100, 0x80010f00 },
|
|
{ 0x0, 0x0 }
|
|
};
|
|
|
|
const gdc_regs *board_get_regs(void)
|
|
{
|
|
return init_regs;
|
|
}
|
|
|
|
/* Returns Lime base address */
|
|
unsigned int board_video_init(void)
|
|
{
|
|
/*
|
|
* Reset Lime controller
|
|
*/
|
|
gpio_write_bit(CONFIG_SYS_GPIO_LIME_S, 1);
|
|
udelay(500);
|
|
gpio_write_bit(CONFIG_SYS_GPIO_LIME_RST, 1);
|
|
|
|
mb862xx.winSizeX = 640;
|
|
mb862xx.winSizeY = 480;
|
|
mb862xx.gdfBytesPP = 2;
|
|
mb862xx.gdfIndex = GDF_15BIT_555RGB;
|
|
|
|
return CONFIG_SYS_LIME_BASE_0;
|
|
}
|
|
|
|
#define DEFAULT_BRIGHTNESS 0x64
|
|
|
|
static void board_backlight_brightness(int brightness)
|
|
{
|
|
if (brightness > 0) {
|
|
/* pwm duty, lamp on */
|
|
out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), brightness);
|
|
out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x701);
|
|
} else {
|
|
/* lamp off */
|
|
out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), 0x00);
|
|
out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x00);
|
|
}
|
|
}
|
|
|
|
void board_backlight_switch(int flag)
|
|
{
|
|
char * param;
|
|
int rc;
|
|
|
|
if (flag) {
|
|
param = getenv("brightness");
|
|
rc = param ? simple_strtol(param, NULL, 10) : -1;
|
|
if (rc < 0)
|
|
rc = DEFAULT_BRIGHTNESS;
|
|
} else {
|
|
rc = 0;
|
|
}
|
|
board_backlight_brightness(rc);
|
|
}
|
|
|
|
#if defined(CONFIG_CONSOLE_EXTRA_INFO)
|
|
/*
|
|
* Return text to be printed besides the logo.
|
|
*/
|
|
void video_get_info_str(int line_number, char *info)
|
|
{
|
|
if (line_number == 1)
|
|
strcpy(info, " Board: Lwmon5 (Liebherr Elektronik GmbH)");
|
|
else
|
|
info [0] = '\0';
|
|
}
|
|
#endif /* CONFIG_CONSOLE_EXTRA_INFO */
|
|
#endif /* CONFIG_VIDEO */
|
|
|
|
void board_reset(void)
|
|
{
|
|
gpio_write_bit(CONFIG_SYS_GPIO_BOARD_RESET, 1);
|
|
}
|