mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-30 22:08:52 +09:00
![Stefan Roese](/assets/img/avatar_default.png)
This patch starts a bit PPC4xx header cleanup. First patch mostly touches PPC440 files. A later patch will touch the PPC405 files as well. This cleanup is done by creating header files for all SoC versions and moving the SoC specific defines into these special headers. This way the common header ppc405.h and ppc440.h can be cleaned up finally. Signed-off-by: Stefan Roese <sr@denx.de>
645 lines
18 KiB
C
645 lines
18 KiB
C
/*
|
|
* (C) Copyright 2007-2010
|
|
* Larry Johnson, lrj@acm.org
|
|
*
|
|
* (C) Copyright 2006-2007
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* (C) Copyright 2006
|
|
* Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
|
|
* Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <fdt_support.h>
|
|
#include <i2c.h>
|
|
#include <libfdt.h>
|
|
#include <asm/ppc440.h>
|
|
#include <asm/bitops.h>
|
|
#include <asm/ppc4xx-gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/ppc4xx-uic.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/4xx_pci.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
|
|
|
ulong flash_get_size(ulong base, int banknum);
|
|
|
|
#if defined(CONFIG_KORAT_PERMANENT)
|
|
void korat_buzzer(int const on)
|
|
{
|
|
if (on) {
|
|
out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05,
|
|
in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05) | 0x80);
|
|
} else {
|
|
out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05,
|
|
in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05) & ~0x80);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
uint32_t sdr0_pfc1, sdr0_pfc2;
|
|
uint32_t reg;
|
|
int eth;
|
|
|
|
#if defined(CONFIG_KORAT_PERMANENT)
|
|
unsigned mscount;
|
|
|
|
extern void korat_branch_absolute(uint32_t addr);
|
|
|
|
for (mscount = 0; mscount < CONFIG_SYS_KORAT_MAN_RESET_MS; ++mscount) {
|
|
udelay(1000);
|
|
if (gpio_read_in_bit(CONFIG_SYS_GPIO_RESET_PRESSED_)) {
|
|
/* This call does not return. */
|
|
korat_branch_absolute(
|
|
CONFIG_SYS_FLASH1_TOP - 2 * CONFIG_ENV_SECT_SIZE - 4);
|
|
}
|
|
}
|
|
korat_buzzer(1);
|
|
while (!gpio_read_in_bit(CONFIG_SYS_GPIO_RESET_PRESSED_))
|
|
udelay(1000);
|
|
|
|
korat_buzzer(0);
|
|
#endif
|
|
|
|
mtdcr(EBC0_CFGADDR, EBC0_CFG);
|
|
mtdcr(EBC0_CFGDATA, 0xb8400000);
|
|
|
|
/*
|
|
* Setup the interrupt controller polarities, triggers, etc.
|
|
*/
|
|
mtdcr(UIC0SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC0ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */
|
|
mtdcr(UIC0PR, 0xfffff7ff); /* per ref-board manual */
|
|
mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */
|
|
mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC0SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC1ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC1CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */
|
|
mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */
|
|
mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC2SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC2ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC2CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */
|
|
mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */
|
|
mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC2SR, 0xffffffff); /* clear all */
|
|
|
|
/*
|
|
* Take sim card reader and CF controller out of reset. Also enable PHY
|
|
* auto-detect until board-specific PHY resets are available.
|
|
*/
|
|
out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x02, 0xC0);
|
|
|
|
/* Configure the two Ethernet PHYs. For each PHY, configure for fiber
|
|
* if the SFP module is present, and for copper if it is not present.
|
|
*/
|
|
for (eth = 0; eth < 2; ++eth) {
|
|
if (gpio_read_in_bit(CONFIG_SYS_GPIO_SFP0_PRESENT_ + eth)) {
|
|
/* SFP module not present: configure PHY for copper. */
|
|
/* Set PHY to autonegotate 10 MB, 100MB, or 1 GB */
|
|
out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03,
|
|
in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03) |
|
|
0x06 << (4 * eth));
|
|
} else {
|
|
/* SFP module present: configure PHY for fiber and
|
|
enable output */
|
|
gpio_write_bit(CONFIG_SYS_GPIO_PHY0_FIBER_SEL + eth, 1);
|
|
gpio_write_bit(CONFIG_SYS_GPIO_SFP0_TX_EN_ + eth, 0);
|
|
}
|
|
}
|
|
/* enable Ethernet: set GPIO45 and GPIO46 to 1 */
|
|
gpio_write_bit(CONFIG_SYS_GPIO_PHY0_EN, 1);
|
|
gpio_write_bit(CONFIG_SYS_GPIO_PHY1_EN, 1);
|
|
|
|
/* Wait 1 ms, then enable Fiber signal detect to PHYs. */
|
|
udelay(1000);
|
|
out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03,
|
|
in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03) | 0x88);
|
|
|
|
/* select Ethernet (and optionally IIC1) pins */
|
|
mfsdr(SDR0_PFC1, sdr0_pfc1);
|
|
sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
|
|
SDR0_PFC1_SELECT_CONFIG_4;
|
|
#ifdef CONFIG_I2C_MULTI_BUS
|
|
sdr0_pfc1 |= ((sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL);
|
|
#endif
|
|
mfsdr(SDR0_PFC2, sdr0_pfc2);
|
|
sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
|
|
SDR0_PFC2_SELECT_CONFIG_4;
|
|
mtsdr(SDR0_PFC2, sdr0_pfc2);
|
|
mtsdr(SDR0_PFC1, sdr0_pfc1);
|
|
|
|
/* PCI arbiter enabled */
|
|
mfsdr(SDR0_PCI0, reg);
|
|
mtsdr(SDR0_PCI0, 0x80000000 | reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The boot flash on CS0 normally has its write-enable pin disabled, and so will
|
|
* not respond to CFI commands. This routine therefore fills in the flash
|
|
* information for the boot flash. (The flash at CS1 operates normally.)
|
|
*/
|
|
ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
|
|
{
|
|
uint32_t addr;
|
|
int i;
|
|
|
|
if (1 != banknum)
|
|
return 0;
|
|
|
|
info->size = CONFIG_SYS_FLASH0_SIZE;
|
|
info->sector_count = CONFIG_SYS_FLASH0_SIZE / 0x20000;
|
|
info->flash_id = 0x01000000;
|
|
info->portwidth = 2;
|
|
info->chipwidth = 2;
|
|
info->buffer_size = 32;
|
|
info->erase_blk_tout = 16384;
|
|
info->write_tout = 2;
|
|
info->buffer_write_tout = 5;
|
|
info->vendor = 2;
|
|
info->cmd_reset = 0x00F0;
|
|
info->interface = 2;
|
|
info->legacy_unlock = 0;
|
|
info->manufacturer_id = 1;
|
|
info->device_id = 0x007E;
|
|
|
|
#if CONFIG_SYS_FLASH0_SIZE == 0x01000000
|
|
info->device_id2 = 0x2101;
|
|
#elif CONFIG_SYS_FLASH0_SIZE == 0x04000000
|
|
info->device_id2 = 0x2301;
|
|
#else
|
|
#error Unable to set device_id2 for current CONFIG_SYS_FLASH0_SIZE
|
|
#endif
|
|
|
|
info->ext_addr = 0x0040;
|
|
info->cfi_version = 0x3133;
|
|
info->cfi_offset = 0x0055;
|
|
info->addr_unlock1 = 0x00000555;
|
|
info->addr_unlock2 = 0x000002AA;
|
|
info->name = "CFI conformant";
|
|
for (i = 0, addr = -info->size;
|
|
i < info->sector_count;
|
|
++i, addr += 0x20000) {
|
|
info->start[i] = addr;
|
|
info->protect[i] = 0x00;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static int man_data_read(unsigned int addr)
|
|
{
|
|
/*
|
|
* Read an octet of data from address "addr" in the manufacturer's
|
|
* information serial EEPROM, or -1 on error.
|
|
*/
|
|
u8 data[2];
|
|
|
|
if (0 != i2c_probe(MAN_DATA_EEPROM_ADDR) ||
|
|
0 != i2c_read(MAN_DATA_EEPROM_ADDR, addr, 1, data, 1)) {
|
|
debug("man_data_read(0x%02X) failed\n", addr);
|
|
return -1;
|
|
}
|
|
debug("man_info_read(0x%02X) returned 0x%02X\n", addr, data[0]);
|
|
return data[0];
|
|
}
|
|
|
|
static unsigned int man_data_field_addr(unsigned int const field)
|
|
{
|
|
/*
|
|
* The manufacturer's information serial EEPROM contains a sequence of
|
|
* zero-delimited fields. Return the starting address of field "field",
|
|
* or 0 on error.
|
|
*/
|
|
unsigned addr, i;
|
|
|
|
if (0 == field || 'A' != man_data_read(0) || '\0' != man_data_read(1))
|
|
/* Only format "A" is currently supported */
|
|
return 0;
|
|
|
|
for (addr = 2, i = 1; i < field && addr < 256; ++addr) {
|
|
if ('\0' == man_data_read(addr))
|
|
++i;
|
|
}
|
|
return (addr < 256) ? addr : 0;
|
|
}
|
|
|
|
static char *man_data_read_field(char s[], unsigned const field,
|
|
unsigned const length)
|
|
{
|
|
/*
|
|
* Place the null-terminated contents of field "field" of length
|
|
* "length" from the manufacturer's information serial EEPROM into
|
|
* string "s[length + 1]" and return a pointer to s, or return 0 on
|
|
* error. In either case the original contents of s[] is not preserved.
|
|
*/
|
|
unsigned addr, i;
|
|
|
|
addr = man_data_field_addr(field);
|
|
if (0 == addr || addr + length >= 255)
|
|
return 0;
|
|
|
|
for (i = 0; i < length; ++i) {
|
|
int const c = man_data_read(addr++);
|
|
|
|
if (c <= 0)
|
|
return 0;
|
|
|
|
s[i] = (char)c;
|
|
}
|
|
if (0 != man_data_read(addr))
|
|
return 0;
|
|
|
|
s[i] = '\0';
|
|
return s;
|
|
}
|
|
|
|
static void set_serial_number(void)
|
|
{
|
|
/*
|
|
* If the environmental variable "serial#" is not set, try to set it
|
|
* from the manufacturer's information serial EEPROM.
|
|
*/
|
|
char s[MAN_INFO_LENGTH + MAN_MAC_ADDR_LENGTH + 2];
|
|
|
|
if (getenv("serial#"))
|
|
return;
|
|
|
|
if (!man_data_read_field(s, MAN_INFO_FIELD, MAN_INFO_LENGTH))
|
|
return;
|
|
|
|
s[MAN_INFO_LENGTH] = '-';
|
|
if (!man_data_read_field(s + MAN_INFO_LENGTH + 1, MAN_MAC_ADDR_FIELD,
|
|
MAN_MAC_ADDR_LENGTH))
|
|
return;
|
|
|
|
setenv("serial#", s);
|
|
}
|
|
|
|
static void set_mac_addresses(void)
|
|
{
|
|
/*
|
|
* If the environmental variables "ethaddr" and/or "eth1addr" are not
|
|
* set, try to set them from the manufacturer's information serial
|
|
* EEPROM.
|
|
*/
|
|
|
|
#if MAN_MAC_ADDR_LENGTH % 2 != 0
|
|
#error MAN_MAC_ADDR_LENGTH must be an even number
|
|
#endif
|
|
|
|
char s[(3 * MAN_MAC_ADDR_LENGTH) / 2];
|
|
char *src;
|
|
char *dst;
|
|
|
|
if (0 != getenv("ethaddr") && 0 != getenv("eth1addr"))
|
|
return;
|
|
|
|
if (0 == man_data_read_field(s + (MAN_MAC_ADDR_LENGTH / 2) - 1,
|
|
MAN_MAC_ADDR_FIELD, MAN_MAC_ADDR_LENGTH))
|
|
return;
|
|
|
|
for (src = s + (MAN_MAC_ADDR_LENGTH / 2) - 1, dst = s; src != dst;) {
|
|
*dst++ = *src++;
|
|
*dst++ = *src++;
|
|
*dst++ = ':';
|
|
}
|
|
if (0 == getenv("ethaddr"))
|
|
setenv("ethaddr", s);
|
|
|
|
if (0 == getenv("eth1addr")) {
|
|
++s[((3 * MAN_MAC_ADDR_LENGTH) / 2) - 2];
|
|
setenv("eth1addr", s);
|
|
}
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
uint32_t pbcr;
|
|
int size_val;
|
|
uint32_t reg;
|
|
unsigned long usb2d0cr = 0;
|
|
unsigned long usb2phy0cr, usb2h0cr = 0;
|
|
unsigned long sdr0_pfc1;
|
|
uint32_t const flash1_size = gd->bd->bi_flashsize - CONFIG_SYS_FLASH0_SIZE;
|
|
char const *const act = getenv("usbact");
|
|
char const *const usbcf = getenv("korat_usbcf");
|
|
|
|
/*
|
|
* Re-do FLASH1 sizing and adjust flash start and offset.
|
|
*/
|
|
gd->bd->bi_flashstart = CONFIG_SYS_FLASH1_TOP - flash1_size;
|
|
gd->bd->bi_flashoffset = 0;
|
|
|
|
mtdcr(EBC0_CFGADDR, PB1CR);
|
|
pbcr = mfdcr(EBC0_CFGDATA);
|
|
size_val = ffs(flash1_size) - 21;
|
|
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
|
|
mtdcr(EBC0_CFGADDR, PB1CR);
|
|
mtdcr(EBC0_CFGDATA, pbcr);
|
|
|
|
/*
|
|
* Re-check to get correct base address
|
|
*/
|
|
flash_get_size(gd->bd->bi_flashstart, 0);
|
|
|
|
/*
|
|
* Re-do FLASH1 sizing and adjust flash offset to reserve space for
|
|
* environment
|
|
*/
|
|
gd->bd->bi_flashoffset =
|
|
CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - CONFIG_SYS_FLASH1_ADDR;
|
|
|
|
mtdcr(EBC0_CFGADDR, PB1CR);
|
|
pbcr = mfdcr(EBC0_CFGDATA);
|
|
size_val = ffs(gd->bd->bi_flashsize - CONFIG_SYS_FLASH0_SIZE) - 21;
|
|
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
|
|
mtdcr(EBC0_CFGADDR, PB1CR);
|
|
mtdcr(EBC0_CFGDATA, pbcr);
|
|
|
|
/* Monitor protection ON by default */
|
|
#if defined(CONFIG_KORAT_PERMANENT)
|
|
(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
|
|
CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
|
|
flash_info + 1);
|
|
#else
|
|
(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
|
|
CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
|
|
flash_info);
|
|
#endif
|
|
/* Env protection ON by default */
|
|
(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
|
|
CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
|
|
flash_info);
|
|
(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
|
|
CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
|
|
flash_info);
|
|
|
|
/*
|
|
* USB suff...
|
|
*/
|
|
/*
|
|
* Select the USB controller on the 440EPx ("ppc") or on the PCI bus
|
|
* ("pci") for the CompactFlash.
|
|
*/
|
|
if (usbcf != NULL && (strcmp(usbcf, "ppc") == 0)) {
|
|
/*
|
|
* If environment variable "usbcf" is defined and set to "ppc",
|
|
* then connect the CompactFlash controller to the PowerPC USB
|
|
* port.
|
|
*/
|
|
printf("Attaching CompactFlash controller to PPC USB\n");
|
|
out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x02,
|
|
in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x02) | 0x10);
|
|
} else {
|
|
if (usbcf != NULL && (strcmp(usbcf, "pci") != 0))
|
|
printf("Warning: \"korat_usbcf\" is not set to a legal "
|
|
"value (\"ppc\" or \"pci\")\n");
|
|
|
|
printf("Attaching CompactFlash controller to PCI USB\n");
|
|
}
|
|
if (act == NULL || strcmp(act, "hostdev") == 0) {
|
|
/* SDR Setting */
|
|
mfsdr(SDR0_PFC1, sdr0_pfc1);
|
|
mfsdr(SDR0_USB2D0CR, usb2d0cr);
|
|
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
|
mfsdr(SDR0_USB2H0CR, usb2h0cr);
|
|
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
|
|
|
|
/*
|
|
* An 8-bit/60MHz interface is the only possible alternative
|
|
* when connecting the Device to the PHY
|
|
*/
|
|
usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
|
|
usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;
|
|
|
|
/*
|
|
* To enable the USB 2.0 Device function
|
|
* through the UTMI interface
|
|
*/
|
|
usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
|
|
usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION;
|
|
|
|
sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
|
|
sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL;
|
|
|
|
mtsdr(SDR0_PFC1, sdr0_pfc1);
|
|
mtsdr(SDR0_USB2D0CR, usb2d0cr);
|
|
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
|
mtsdr(SDR0_USB2H0CR, usb2h0cr);
|
|
|
|
/* clear resets */
|
|
udelay(1000);
|
|
mtsdr(SDR0_SRST1, 0x00000000);
|
|
udelay(1000);
|
|
mtsdr(SDR0_SRST0, 0x00000000);
|
|
|
|
printf("USB: Host(int phy) Device(ext phy)\n");
|
|
|
|
} else if (strcmp(act, "dev") == 0) {
|
|
/*-------------------PATCH-------------------------------*/
|
|
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
|
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
|
|
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
|
|
|
udelay(1000);
|
|
mtsdr(SDR0_SRST1, 0x672c6000);
|
|
|
|
udelay(1000);
|
|
mtsdr(SDR0_SRST0, 0x00000080);
|
|
|
|
udelay(1000);
|
|
mtsdr(SDR0_SRST1, 0x60206000);
|
|
|
|
*(unsigned int *)(0xe0000350) = 0x00000001;
|
|
|
|
udelay(1000);
|
|
mtsdr(SDR0_SRST1, 0x60306000);
|
|
/*-------------------PATCH-------------------------------*/
|
|
|
|
/* SDR Setting */
|
|
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
|
mfsdr(SDR0_USB2H0CR, usb2h0cr);
|
|
mfsdr(SDR0_USB2D0CR, usb2d0cr);
|
|
mfsdr(SDR0_PFC1, sdr0_pfc1);
|
|
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;
|
|
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
|
|
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;
|
|
|
|
usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
|
|
usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;
|
|
|
|
usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
|
|
usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION;
|
|
|
|
sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
|
|
sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;
|
|
|
|
mtsdr(SDR0_USB2H0CR, usb2h0cr);
|
|
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
|
|
mtsdr(SDR0_USB2D0CR, usb2d0cr);
|
|
mtsdr(SDR0_PFC1, sdr0_pfc1);
|
|
|
|
/* clear resets */
|
|
udelay(1000);
|
|
mtsdr(SDR0_SRST1, 0x00000000);
|
|
udelay(1000);
|
|
mtsdr(SDR0_SRST0, 0x00000000);
|
|
|
|
printf("USB: Device(int phy)\n");
|
|
}
|
|
|
|
mfsdr(SDR0_SRST1, reg); /* enable security/kasumi engines */
|
|
reg &= ~(SDR0_SRST1_CRYP0 | SDR0_SRST1_KASU0);
|
|
mtsdr(SDR0_SRST1, reg);
|
|
|
|
/*
|
|
* Clear PLB4A0_ACR[WRP]
|
|
* This fix will make the MAL burst disabling patch for the Linux
|
|
* EMAC driver obsolete.
|
|
*/
|
|
reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK;
|
|
mtdcr(PLB4A0_ACR, reg);
|
|
|
|
set_serial_number();
|
|
set_mac_addresses();
|
|
gpio_write_bit(CONFIG_SYS_GPIO_ATMEGA_RESET_, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
char const *const s = getenv("serial#");
|
|
u8 const rev = in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0);
|
|
|
|
printf("Board: Korat, Rev. %X", rev);
|
|
if (s)
|
|
printf(", serial# %s", s);
|
|
|
|
printf(".\n Ethernet PHY 0: ");
|
|
if (gpio_read_out_bit(CONFIG_SYS_GPIO_PHY0_FIBER_SEL))
|
|
printf("fiber");
|
|
else
|
|
printf("copper");
|
|
|
|
printf(", PHY 1: ");
|
|
if (gpio_read_out_bit(CONFIG_SYS_GPIO_PHY1_FIBER_SEL))
|
|
printf("fiber");
|
|
else
|
|
printf("copper");
|
|
|
|
printf(".\n");
|
|
#if defined(CONFIG_KORAT_PERMANENT)
|
|
printf(" Executing permanent copy of U-Boot.\n");
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_PCI) && defined(CONFIG_PCI_PNP)
|
|
/*
|
|
* Assign interrupts to PCI devices.
|
|
*/
|
|
void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
|
|
{
|
|
pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIRQ2);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* pci_target_init
|
|
*
|
|
* The bootstrap configuration provides default settings for the pci
|
|
* inbound map (PIM). But the bootstrap config choices are limited and
|
|
* may not be sufficient for a given board.
|
|
*/
|
|
#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
|
|
void pci_target_init(struct pci_controller *hose)
|
|
{
|
|
/* First do 440EP(x) common setup */
|
|
__pci_target_init(hose);
|
|
|
|
/*
|
|
* Set up Configuration registers for on-board NEC uPD720101 USB
|
|
* controller.
|
|
*/
|
|
pci_write_config_dword(PCI_BDF(0x0, 0xC, 0x0), 0xE4, 0x00000020);
|
|
}
|
|
#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
|
|
|
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
u32 val[4];
|
|
int rc;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
/* Fixup NOR mapping */
|
|
val[0] = 1; /* chip select number */
|
|
val[1] = 0; /* always 0 */
|
|
val[2] = gd->bd->bi_flashstart;
|
|
val[3] = gd->bd->bi_flashsize - CONFIG_SYS_FLASH0_SIZE;
|
|
rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
|
|
val, sizeof(val), 1);
|
|
if (rc)
|
|
printf("Unable to update property NOR mapping, err=%s\n",
|
|
fdt_strerror(rc));
|
|
}
|
|
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
|