mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
![Shengzhou Liu](/assets/img/avatar_default.png)
T2080PCIe-RDB is a Freescale Reference Design Board that hosts the T2080 SoC. It works in two mode: standalone mode and PCIe endpoint mode. T2080PCIe-RDB Feature Overview ------------------------------ Processor: - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz DDR Memory: - Single memory controller capable of supporting DDR3 and DDR3-LP devices - 72bit 4GB DDR3-LP SODIMM in slot Ethernet interfaces: - Two 10M/100M/1G RGMII ports on-board - Two 10Gbps SFP+ ports on-board - Two 10Gbps Base-T ports on-board Accelerator: - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC SerDes 16 lanes configuration: - SerDes-1 Lane A-B: to two 10G XFI fiber (MAC9 & MAC10) - SerDes-1 Lane C-D: to two 10G Base-T (MAC1 & MAC2) - SerDes-1 Lane E-H: to PCIe Goldfinger (PCIe4 x4, Gen3) - SerDes-2 Lane A-D: to PCIe Slot (PCIe1 x4, Gen2) - SerDes-2 Lane E-F: to C293 secure co-processor (PCIe2 x2) - SerDes-2 Lane G-H: to SATA1 & SATA2 IFC/Local Bus: - NOR: 128MB 16-bit NOR flash - NAND: 512MB 8-bit NAND flash - CPLD: for system controlling with programable header on-board eSPI: - 64MB N25Q512 SPI flash USB: - Two USB2.0 ports with internal PHY (both Type-A) PCIe: - One PCIe x4 gold-finger - One PCIe x4 connector - One PCIe x2 end-point device (C293 Crypto co-processor) SATA: - Two SATA 2.0 ports on-board SDHC: - support a TF-card on-board I2C: - Four I2C controllers. UART: - Dual 4-pins UART serial ports Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
107 lines
2.5 KiB
C
107 lines
2.5 KiB
C
/*
|
|
* Copyright 2014 Freescale Semiconductor, Inc.
|
|
*
|
|
* Shengzhou Liu <Shengzhou.Liu@freescale.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <netdev.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/fsl_portals.h>
|
|
#include <asm/fsl_liodn.h>
|
|
#include <malloc.h>
|
|
#include <fm_eth.h>
|
|
#include <fsl_mdio.h>
|
|
#include <miiphy.h>
|
|
#include <phy.h>
|
|
#include <asm/fsl_dtsec.h>
|
|
#include <asm/fsl_serdes.h>
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
#if defined(CONFIG_FMAN_ENET)
|
|
int i, interface;
|
|
struct memac_mdio_info dtsec_mdio_info;
|
|
struct memac_mdio_info tgec_mdio_info;
|
|
struct mii_dev *dev;
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 srds_s1;
|
|
|
|
srds_s1 = in_be32(&gur->rcwsr[4]) &
|
|
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
|
|
srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
|
|
|
|
dtsec_mdio_info.regs =
|
|
(struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
|
|
|
|
dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
|
|
|
|
/* Register the 1G MDIO bus */
|
|
fm_memac_mdio_init(bis, &dtsec_mdio_info);
|
|
|
|
tgec_mdio_info.regs =
|
|
(struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
|
|
tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
|
|
|
|
/* Register the 10G MDIO bus */
|
|
fm_memac_mdio_init(bis, &tgec_mdio_info);
|
|
|
|
/* Set the two on-board RGMII PHY address */
|
|
fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR);
|
|
|
|
switch (srds_s1) {
|
|
case 0x66:
|
|
case 0x6b:
|
|
fm_info_set_phy_address(FM1_10GEC1, CORTINA_PHY_ADDR1);
|
|
fm_info_set_phy_address(FM1_10GEC2, CORTINA_PHY_ADDR2);
|
|
fm_info_set_phy_address(FM1_10GEC3, FM1_10GEC3_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_10GEC4, FM1_10GEC4_PHY_ADDR);
|
|
break;
|
|
default:
|
|
printf("SerDes1 protocol 0x%x is not supported on T208xRDB\n",
|
|
srds_s1);
|
|
break;
|
|
}
|
|
|
|
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
|
|
interface = fm_info_get_enet_if(i);
|
|
switch (interface) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
|
|
fm_info_set_mdio(i, dev);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
|
|
switch (fm_info_get_enet_if(i)) {
|
|
case PHY_INTERFACE_MODE_XGMII:
|
|
dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
|
|
fm_info_set_mdio(i, dev);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
cpu_eth_init(bis);
|
|
#endif /* CONFIG_FMAN_ENET */
|
|
|
|
return pci_eth_init(bis);
|
|
}
|
|
|
|
void fdt_fixup_board_enet(void *fdt)
|
|
{
|
|
return;
|
|
}
|