mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
This function can fail if the device tree runs out of space. Rather than silently booting with an incomplete device tree, allow the failure to be detected. Unfortunately this involves changing a lot of places in the code. I have not changed behvaiour to return an error where one is not currently returned, to avoid unexpected breakage. Eventually it would be nice to allow boards to register functions to be called to update the device tree. This would avoid all the many functions to do this. However it's not clear yet if this should be done using driver model or with a linker list. This work is left for later. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
219 lines
5.5 KiB
C
219 lines
5.5 KiB
C
/*
|
|
* Copyright 2009-2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <netdev.h>
|
|
#include <linux/compiler.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/fsl_portals.h>
|
|
#include <asm/fsl_liodn.h>
|
|
#include <fm_eth.h>
|
|
|
|
#include "../common/ngpixis.h"
|
|
#include "corenet_ds.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int checkboard (void)
|
|
{
|
|
u8 sw;
|
|
struct cpu_type *cpu = gd->arch.cpu;
|
|
#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) || \
|
|
defined(CONFIG_P5040DS)
|
|
unsigned int i;
|
|
#endif
|
|
static const char * const freq[] = {"100", "125", "156.25", "212.5" };
|
|
|
|
printf("Board: %sDS, ", cpu->name);
|
|
printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
|
|
in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
|
|
|
|
sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
|
|
sw = (sw & PIXIS_LBMAP_MASK) >> PIXIS_LBMAP_SHIFT;
|
|
|
|
if (sw < 0x8)
|
|
printf("vBank: %d\n", sw);
|
|
else if (sw == 0x8)
|
|
puts("Promjet\n");
|
|
else if (sw == 0x9)
|
|
puts("NAND\n");
|
|
else
|
|
printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
|
|
|
|
/* Display the actual SERDES reference clocks as configured by the
|
|
* dip switches on the board. Note that the SWx registers could
|
|
* technically be set to force the reference clocks to match the
|
|
* values that the SERDES expects (or vice versa). For now, however,
|
|
* we just display both values and hope the user notices when they
|
|
* don't match.
|
|
*/
|
|
puts("SERDES Reference Clocks: ");
|
|
#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) \
|
|
|| defined(CONFIG_P5040DS)
|
|
sw = in_8(&PIXIS_SW(5));
|
|
for (i = 0; i < 3; i++) {
|
|
unsigned int clock = (sw >> (6 - (2 * i))) & 3;
|
|
|
|
printf("Bank%u=%sMhz ", i+1, freq[clock]);
|
|
}
|
|
#ifdef CONFIG_P5040DS
|
|
/* On P5040DS, SW11[7:8] determines the Bank 4 frequency */
|
|
sw = in_8(&PIXIS_SW(9));
|
|
printf("Bank4=%sMhz ", freq[sw & 3]);
|
|
#endif
|
|
puts("\n");
|
|
#else
|
|
sw = in_8(&PIXIS_SW(3));
|
|
/* SW3[2]: 0 = 100 Mhz, 1 = 125 MHz */
|
|
/* SW3[3]: 0 = 125 Mhz, 1 = 156.25 MHz */
|
|
/* SW3[4]: 0 = 125 Mhz, 1 = 156.25 MHz */
|
|
printf("Bank1=%sMHz ", freq[!!(sw & 0x40)]);
|
|
printf("Bank2=%sMHz ", freq[1 + !!(sw & 0x20)]);
|
|
printf("Bank3=%sMHz\n", freq[1 + !!(sw & 0x10)]);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
|
|
/*
|
|
* P4080 DS board only uses the DDR1_MCK0/3 and DDR2_MCK0/3
|
|
* disable the DDR1_MCK1/2/4/5 and DDR2_MCK1/2/4/5 to reduce
|
|
* the noise introduced by these unterminated and unused clock pairs.
|
|
*/
|
|
setbits_be32(&gur->ddrclkdr, 0x001B001B);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
|
|
int flash_esel = find_tlb_idx((void *)flashbase, 1);
|
|
|
|
/*
|
|
* Remap Boot flash + PROMJET region to caching-inhibited
|
|
* so that flash can be erased properly.
|
|
*/
|
|
|
|
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
|
flush_dcache();
|
|
invalidate_icache();
|
|
|
|
if (flash_esel == -1) {
|
|
/* very unlikely unless something is messed up */
|
|
puts("Error: Could not find TLB for FLASH BASE\n");
|
|
flash_esel = 2; /* give our best effort to continue */
|
|
} else {
|
|
/* invalidate existing TLB entry for flash + promjet */
|
|
disable_tlb(flash_esel);
|
|
}
|
|
|
|
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
|
|
0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */
|
|
|
|
set_liodns();
|
|
#ifdef CONFIG_SYS_DPAA_QBMAN
|
|
setup_portals();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define NUM_SRDS_BANKS 3
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
|
|
u32 actual[NUM_SRDS_BANKS];
|
|
unsigned int i;
|
|
u8 sw;
|
|
|
|
#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) \
|
|
|| defined(CONFIG_P5040DS)
|
|
sw = in_8(&PIXIS_SW(5));
|
|
for (i = 0; i < 3; i++) {
|
|
unsigned int clock = (sw >> (6 - (2 * i))) & 3;
|
|
switch (clock) {
|
|
case 0:
|
|
actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
|
|
break;
|
|
case 1:
|
|
actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
|
|
break;
|
|
case 2:
|
|
actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
|
|
break;
|
|
default:
|
|
printf("Warning: SDREFCLK%u switch setting of '11' is "
|
|
"unsupported\n", i + 1);
|
|
break;
|
|
}
|
|
}
|
|
#else
|
|
/* Warn if the expected SERDES reference clocks don't match the
|
|
* actual reference clocks. This needs to be done after calling
|
|
* p4080_erratum_serdes8(), since that function may modify the clocks.
|
|
*/
|
|
sw = in_8(&PIXIS_SW(3));
|
|
actual[0] = (sw & 0x40) ?
|
|
SRDS_PLLCR0_RFCK_SEL_125 : SRDS_PLLCR0_RFCK_SEL_100;
|
|
actual[1] = (sw & 0x20) ?
|
|
SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
|
|
actual[2] = (sw & 0x10) ?
|
|
SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
|
|
#endif
|
|
|
|
for (i = 0; i < NUM_SRDS_BANKS; i++) {
|
|
u32 expected = srds_regs->bank[i].pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
|
|
if (expected != actual[i]) {
|
|
printf("Warning: SERDES bank %u expects reference clock"
|
|
" %sMHz, but actual is %sMHz\n", i + 1,
|
|
serdes_clock_to_string(expected),
|
|
serdes_clock_to_string(actual[i]));
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
phys_addr_t base;
|
|
phys_size_t size;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
base = getenv_bootm_low();
|
|
size = getenv_bootm_size();
|
|
|
|
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
|
|
|
#ifdef CONFIG_PCI
|
|
pci_of_setup(blob, bd);
|
|
#endif
|
|
|
|
fdt_fixup_liodn(blob);
|
|
fdt_fixup_dr_usb(blob, bd);
|
|
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
fdt_fixup_fman_ethernet(blob);
|
|
fdt_fixup_board_enet(blob);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|