mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
This function can fail if the device tree runs out of space. Rather than silently booting with an incomplete device tree, allow the failure to be detected. Unfortunately this involves changing a lot of places in the code. I have not changed behvaiour to return an error where one is not currently returned, to avoid unexpected breakage. Eventually it would be nice to allow boards to register functions to be called to update the device tree. This would avoid all the many functions to do this. However it's not clear yet if this should be done using driver model or with a linker list. This work is left for later. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
430 lines
9.3 KiB
C
430 lines
9.3 KiB
C
/*
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/io.h>
|
|
#include <miiphy.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <fsl_mdio.h>
|
|
#include <tsec.h>
|
|
#include <mmc.h>
|
|
#include <netdev.h>
|
|
#include <fsl_ifc.h>
|
|
#include <hwconfig.h>
|
|
#include <i2c.h>
|
|
#include <fsl_ddr_sdram.h>
|
|
#include <jffs2/load_kernel.h>
|
|
#include <mtd_node.h>
|
|
#include <flash.h>
|
|
|
|
#ifdef CONFIG_PCI
|
|
#include <pci.h>
|
|
#include <asm/fsl_pci.h>
|
|
#endif
|
|
|
|
#include "../common/qixis.h"
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR;
|
|
|
|
setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void board_config_serdes_mux(void)
|
|
{
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 pordevsr = in_be32(&gur->pordevsr);
|
|
u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
|
|
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
|
|
|
|
switch (srds_cfg) {
|
|
/* PEX(1) PEX(2) CPRI 2 CPRI 1 */
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
case 22:
|
|
case 23:
|
|
case 24:
|
|
case 25:
|
|
case 26:
|
|
QIXIS_WRITE_I2C(brdcfg[4], 0x03);
|
|
break;
|
|
|
|
/* PEX(1) PEX(2) SGMII1 CPRI 1 */
|
|
case 6:
|
|
case 7:
|
|
case 8:
|
|
case 9:
|
|
case 10:
|
|
case 27:
|
|
case 28:
|
|
case 29:
|
|
case 30:
|
|
case 31:
|
|
QIXIS_WRITE_I2C(brdcfg[4], 0x01);
|
|
break;
|
|
|
|
/* PEX(1) PEX(2) SGMII1 SGMII2 */
|
|
case 11:
|
|
case 32:
|
|
QIXIS_WRITE_I2C(brdcfg[4], 0x00);
|
|
break;
|
|
|
|
/* PEX(1) SGMII2 CPRI 2 CPRI 1 */
|
|
case 12:
|
|
case 13:
|
|
case 14:
|
|
case 15:
|
|
case 16:
|
|
case 33:
|
|
case 34:
|
|
case 35:
|
|
case 36:
|
|
case 37:
|
|
QIXIS_WRITE_I2C(brdcfg[4], 0x07);
|
|
break;
|
|
|
|
/* PEX(1) SGMII2 SGMII1 CPRI 1 */
|
|
case 17:
|
|
case 18:
|
|
case 19:
|
|
case 20:
|
|
case 21:
|
|
case 38:
|
|
case 39:
|
|
case 40:
|
|
case 41:
|
|
case 42:
|
|
QIXIS_WRITE_I2C(brdcfg[4], 0x05);
|
|
break;
|
|
|
|
/* SGMII1 SGMII2 CPRI 2 CPRI 1 */
|
|
case 43:
|
|
case 44:
|
|
case 45:
|
|
case 46:
|
|
case 47:
|
|
QIXIS_WRITE_I2C(brdcfg[4], 0x0F);
|
|
break;
|
|
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Configure DSP DDR controller */
|
|
void dsp_ddr_configure(void)
|
|
{
|
|
/*
|
|
*There are separate DDR-controllers for DSP and PowerPC side DDR.
|
|
*copy the ddr controller settings from PowerPC side DDR controller
|
|
*to the DSP DDR controller as connected DDR memories are similar.
|
|
*/
|
|
struct ccsr_ddr __iomem *pa_ddr =
|
|
(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
|
|
struct ccsr_ddr temp_ddr;
|
|
struct ccsr_ddr __iomem *dsp_ddr =
|
|
(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR;
|
|
|
|
memcpy(&temp_ddr, pa_ddr, sizeof(struct ccsr_ddr));
|
|
temp_ddr.cs0_bnds = CONFIG_SYS_DDR1_CS0_BNDS;
|
|
temp_ddr.sdram_cfg &= ~SDRAM_CFG_MEM_EN;
|
|
memcpy(dsp_ddr, &temp_ddr, sizeof(struct ccsr_ddr));
|
|
dsp_ddr->sdram_cfg |= SDRAM_CFG_MEM_EN;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
#ifndef CONFIG_SYS_NO_FLASH
|
|
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
|
|
int flash_esel = find_tlb_idx((void *)flashbase, 1);
|
|
|
|
/*
|
|
* Remap Boot flash region to caching-inhibited
|
|
* so that flash can be erased properly.
|
|
*/
|
|
|
|
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
|
flush_dcache();
|
|
invalidate_icache();
|
|
|
|
if (flash_esel == -1) {
|
|
/* very unlikely unless something is messed up */
|
|
puts("Error: Could not find TLB for FLASH BASE\n");
|
|
flash_esel = 2; /* give our best effort to continue */
|
|
} else {
|
|
/* invalidate existing TLB entry for flash */
|
|
disable_tlb(flash_esel);
|
|
}
|
|
|
|
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
|
0, flash_esel, BOOKE_PAGESZ_64M, 1);
|
|
|
|
set_tlb(1, flashbase + 0x4000000,
|
|
CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000,
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
|
0, flash_esel+1, BOOKE_PAGESZ_64M, 1);
|
|
#endif
|
|
board_config_serdes_mux();
|
|
dsp_ddr_configure();
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
void pci_init_board(void)
|
|
{
|
|
fsl_pcie_init_board(0);
|
|
}
|
|
#endif /* ifdef CONFIG_PCI */
|
|
|
|
int checkboard(void)
|
|
{
|
|
struct cpu_type *cpu;
|
|
u8 sw;
|
|
|
|
cpu = gd->arch.cpu;
|
|
printf("Board: %sQDS\n", cpu->name);
|
|
|
|
printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x,\n",
|
|
QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
|
|
|
|
sw = QIXIS_READ(brdcfg[0]);
|
|
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
|
|
|
|
printf("IFC chip select:");
|
|
switch (sw) {
|
|
case 0:
|
|
printf("NOR\n");
|
|
break;
|
|
case 2:
|
|
printf("Promjet\n");
|
|
break;
|
|
case 4:
|
|
printf("NAND\n");
|
|
break;
|
|
default:
|
|
printf("Invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_TSEC_ENET
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
struct fsl_pq_mdio_info mdio_info;
|
|
struct tsec_info_struct tsec_info[4];
|
|
int num = 0;
|
|
|
|
#ifdef CONFIG_TSEC1
|
|
SET_STD_TSEC_INFO(tsec_info[num], 1);
|
|
num++;
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_TSEC2
|
|
SET_STD_TSEC_INFO(tsec_info[num], 2);
|
|
num++;
|
|
#endif
|
|
|
|
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
|
|
mdio_info.name = DEFAULT_MII_NAME;
|
|
|
|
fsl_pq_mdio_init(bis, &mdio_info);
|
|
tsec_eth_init(bis, tsec_info, num);
|
|
|
|
#ifdef CONFIG_PCI
|
|
pci_eth_init(bis);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#define USBMUX_SEL_MASK 0xc0
|
|
#define USBMUX_SEL_UART2 0xc0
|
|
#define USBMUX_SEL_USB 0x40
|
|
#define SPIMUX_SEL_UART3 0x80
|
|
#define GPS_MUX_SEL_GPS 0x40
|
|
|
|
#define TSEC_1588_CLKIN_MASK 0x03
|
|
#define CON_XCVR_REF_CLK 0x00
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
u8 val;
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 porbmsr = in_be32(&gur->porbmsr);
|
|
u32 romloc = (porbmsr >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf;
|
|
|
|
/*Configure 1588 clock-in source from RF Card*/
|
|
val = QIXIS_READ_I2C(brdcfg[5]);
|
|
QIXIS_WRITE_I2C(brdcfg[5],
|
|
(val & ~(TSEC_1588_CLKIN_MASK)) | CON_XCVR_REF_CLK);
|
|
|
|
if (hwconfig("uart2") && hwconfig("usb1")) {
|
|
printf("UART2 and USB cannot work together on the board\n");
|
|
printf("Remove one from hwconfig and reset\n");
|
|
} else {
|
|
if (hwconfig("uart2")) {
|
|
val = QIXIS_READ_I2C(brdcfg[5]);
|
|
QIXIS_WRITE_I2C(brdcfg[5],
|
|
(val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_UART2);
|
|
clrbits_be32(&gur->pmuxcr3,
|
|
MPC85xx_PMUXCR3_USB_SEL_MASK);
|
|
setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART2_SEL);
|
|
} else {
|
|
/* By default USB should be selected.
|
|
* Programming FPGA to select USB. */
|
|
val = QIXIS_READ_I2C(brdcfg[5]);
|
|
QIXIS_WRITE_I2C(brdcfg[5],
|
|
(val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_USB);
|
|
}
|
|
|
|
}
|
|
|
|
if (hwconfig("sim")) {
|
|
if (romloc == PORBMSR_ROMLOC_NAND_2K ||
|
|
romloc == PORBMSR_ROMLOC_NOR ||
|
|
romloc == PORBMSR_ROMLOC_SPI) {
|
|
|
|
val = QIXIS_READ_I2C(brdcfg[3]);
|
|
QIXIS_WRITE_I2C(brdcfg[3], val|0x10);
|
|
clrbits_be32(&gur->pmuxcr,
|
|
MPC85xx_PMUXCR0_SIM_SEL_MASK);
|
|
setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR0_SIM_SEL);
|
|
}
|
|
}
|
|
|
|
if (hwconfig("uart3")) {
|
|
if (romloc == PORBMSR_ROMLOC_NAND_2K ||
|
|
romloc == PORBMSR_ROMLOC_NOR ||
|
|
romloc == PORBMSR_ROMLOC_SDHC) {
|
|
|
|
/* UART3 and SPI1 (Flashes) are muxed together */
|
|
val = QIXIS_READ_I2C(brdcfg[3]);
|
|
QIXIS_WRITE_I2C(brdcfg[3], (val | SPIMUX_SEL_UART3));
|
|
clrbits_be32(&gur->pmuxcr3,
|
|
MPC85xx_PMUXCR3_UART3_SEL_MASK);
|
|
setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART3_SEL);
|
|
|
|
/* MUX to select UART3 connection to J24 header
|
|
* or to GPS */
|
|
val = QIXIS_READ_I2C(brdcfg[6]);
|
|
if (hwconfig("gps"))
|
|
QIXIS_WRITE_I2C(brdcfg[6],
|
|
(val | GPS_MUX_SEL_GPS));
|
|
else
|
|
QIXIS_WRITE_I2C(brdcfg[6],
|
|
(val & ~(GPS_MUX_SEL_GPS)));
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void fdt_del_node_compat(void *blob, const char *compatible)
|
|
{
|
|
int err;
|
|
int off = fdt_node_offset_by_compatible(blob, -1, compatible);
|
|
if (off < 0) {
|
|
printf("WARNING: could not find compatible node %s: %s.\n",
|
|
compatible, fdt_strerror(off));
|
|
return;
|
|
}
|
|
err = fdt_del_node(blob, off);
|
|
if (err < 0) {
|
|
printf("WARNING: could not remove %s: %s.\n",
|
|
compatible, fdt_strerror(err));
|
|
}
|
|
}
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
|
|
struct node_info nodes[] = {
|
|
{ "cfi-flash", MTD_DEV_TYPE_NOR, },
|
|
{ "fsl,ifc-nand", MTD_DEV_TYPE_NAND, },
|
|
};
|
|
#endif
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
phys_addr_t base;
|
|
phys_size_t size;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
base = getenv_bootm_low();
|
|
size = getenv_bootm_size();
|
|
|
|
#if defined(CONFIG_PCI)
|
|
FT_FSL_PCI_SETUP;
|
|
#endif
|
|
|
|
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
|
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
|
|
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
|
|
#endif
|
|
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 porbmsr = in_be32(&gur->porbmsr);
|
|
u32 romloc = (porbmsr >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf;
|
|
|
|
if (!(hwconfig("uart2") && hwconfig("usb1"))) {
|
|
/* If uart2 is there in hwconfig remove usb node from
|
|
* device tree */
|
|
|
|
if (hwconfig("uart2")) {
|
|
/* remove dts usb node */
|
|
fdt_del_node_compat(blob, "fsl-usb2-dr");
|
|
} else {
|
|
fdt_fixup_dr_usb(blob, bd);
|
|
fdt_del_node_and_alias(blob, "serial2");
|
|
}
|
|
}
|
|
|
|
if (hwconfig("uart3")) {
|
|
if (romloc == PORBMSR_ROMLOC_NAND_2K ||
|
|
romloc == PORBMSR_ROMLOC_NOR ||
|
|
romloc == PORBMSR_ROMLOC_SDHC)
|
|
/* Delete SPI node from the device tree */
|
|
fdt_del_node_and_alias(blob, "spi1");
|
|
} else
|
|
fdt_del_node_and_alias(blob, "serial3");
|
|
|
|
if (hwconfig("sim")) {
|
|
if (romloc == PORBMSR_ROMLOC_NAND_2K ||
|
|
romloc == PORBMSR_ROMLOC_NOR ||
|
|
romloc == PORBMSR_ROMLOC_SPI) {
|
|
|
|
/* remove dts sdhc node */
|
|
fdt_del_node_compat(blob, "fsl,esdhc");
|
|
} else if (romloc == PORBMSR_ROMLOC_SDHC) {
|
|
|
|
/* remove dts sim node */
|
|
fdt_del_node_compat(blob, "fsl,sim-v1.0");
|
|
printf("SIM & SDHC can't work together on the board");
|
|
printf("\nRemove sim from hwconfig and reset\n");
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|