Hou Zhiqiang 71fe22256c fsl: serdes: ensure accessing the initialized maps of serdes protocol ... Up to now, the function is_serdes_configed() doesn't check if the map of serdes protocol is initialized before accessing it. The function is_serdes_configed() will get wrong result when it was called before the serdes protocol maps initialized. As the first element of the map isn't used for any device, so use it as the flag to indicate if the map has been initialized. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>		2016-09-14 14:06:49 -07:00
..
am33xx	ARM: am33xx: Always inhibit init/refresh during DDR phy init	2016-07-25 12:00:06 -04:00
bcm235xx	arm: bcm235xx: update clock framework	2016-06-24 17:24:38 -04:00
bcm281xx	bcm281xx: add support for "USB OTG clock"	2014-12-29 16:31:23 -05:00
bcmcygnus	arm: bcmcygnus: Add bcmcygnus u-architecture	2014-08-30 07:46:40 -04:00
bcmnsp	arm: bcmnsp: Add bcmnsp u-architecture	2014-08-30 07:46:40 -04:00
iproc-common	arm: iproc: Initial commit of iproc architecture code	2014-08-30 07:46:40 -04:00
kona-common	board: arm:: Add support for Broadcom BCM23550	2016-06-13 08:56:02 -04:00
ls102xa	fsl: serdes: ensure accessing the initialized maps of serdes protocol	2016-09-14 14:06:49 -07:00
mx5	arch: Make board selection choices optional	2015-05-12 18:10:02 -04:00
mx6	mx6: ddr: Allow changing REFSEL and REFR fields	2016-09-06 18:22:48 +02:00
mx7	ARM: armv7: move CONFIG_ARMV7_PSCI to Kconfig	2016-09-07 08:48:51 -04:00
omap3	omap3: Drop omap3_evm_quick_* targets	2016-08-05 20:53:53 -04:00
omap4	omap4: Check warm reset for reboot mode validity	2016-03-15 15:12:54 -04:00
omap5	ARM: OMAP5+: vcores: Drop unnecessary #ifndefs	2016-08-20 14:03:25 -04:00
omap-common	ARM: OMAP4+: vcores: Remove duplicated code	2016-08-20 14:03:25 -04:00
s5p-common	exynos: pwm: Add a driver for the exynos5 PWM	2016-05-25 13:25:18 +09:00
stv0991	stv0991: configure clock & pad muxing for qspi	2015-07-03 13:50:53 +05:30
sunxi	ARM: Rework and correct barrier definitions	2016-08-05 07:23:57 -04:00
vf610	imx: vf610 add get_cpu_rev	2015-09-02 15:39:51 +02:00
arch_timer.c	arm: add support for arch timer	2014-04-17 17:24:38 -04:00
cache_v7_asm.S	arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_INVAL_ALL) with asm code	2016-04-11 20:48:27 -04:00
cache_v7.c	ARM: Rework and correct barrier definitions	2016-08-05 07:23:57 -04:00
config.mk	ARM: move -march=* and -mtune= options to arch/arm/Makefile	2015-03-27 16:55:22 +01:00
cp15.c	ARM: Introduce erratum workaround for 454179	2015-03-13 09:28:48 -04:00
cpu.c	arm: Turn of d-cache before i-cache	2015-09-02 21:28:25 -06:00
Kconfig	ARM: armv7: move ARMV7_PSCI_NR_CPUS to Kconfig	2016-09-07 08:48:54 -04:00
lowlevel_init.S	ARM: SPL: Use CONFIG_SPL_DM not CONFIG_DM	2015-08-12 20:48:07 -04:00
Makefile	ARM: PSCI: Add helper functions to access per-CPU target PC storage	2016-07-15 15:54:58 +02:00
nonsec_virt.S	ARM: PSCI: Split out common stack setup code from psci_arch_init	2016-07-15 15:54:56 +02:00
psci-common.c	ARM: Rework and correct barrier definitions	2016-08-05 07:23:57 -04:00
psci.S	ARMv7: PSCI: add PSCI v1.0 functions skeleton	2016-07-26 09:02:39 -07:00
start.S	arm: Allow skipping of low-level init with I-cache on	2016-06-12 23:49:38 +02:00
syslib.c	ARM: OMAP: hide custom bit manipulation function sr32()	2014-04-17 14:39:54 -04:00
virt-dt.c	ARMv8/PSCI: Fixup the device tree for PSCI	2016-07-19 11:34:07 -07:00
virt-v7.c	ARM: non-sec: flush code cacheline aligned	2016-08-12 09:22:15 -04:00