mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-25 03:18:51 +09:00
![Simon Glass](/assets/img/avatar_default.png)
This function can fail if the device tree runs out of space. Rather than silently booting with an incomplete device tree, allow the failure to be detected. Unfortunately this involves changing a lot of places in the code. I have not changed behvaiour to return an error where one is not currently returned, to avoid unexpected breakage. Eventually it would be nice to allow boards to register functions to be called to update the device tree. This would avoid all the many functions to do this. However it's not clear yet if this should be done using driver model or with a linker list. This work is left for later. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
610 lines
17 KiB
C
610 lines
17 KiB
C
/*
|
|
* (C) Copyright 2009, 2010 Wolfgang Denk <wd@denx.de>
|
|
*
|
|
* (C) Copyright 2009-2010
|
|
* Michael Weiß, ifm ecomatic gmbh, michael.weiss@ifm.com
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/bitops.h>
|
|
#include <command.h>
|
|
#include <asm/io.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mpc512x.h>
|
|
#include <fdt_support.h>
|
|
#include <flash.h>
|
|
#ifdef CONFIG_MISC_INIT_R
|
|
#include <i2c.h>
|
|
#endif
|
|
#include <serial.h>
|
|
#include <jffs2/load_kernel.h>
|
|
#include <mtd_node.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern flash_info_t flash_info[];
|
|
ulong flash_get_size (phys_addr_t base, int banknum);
|
|
|
|
sdram_conf_t mddrc_config[] = {
|
|
{
|
|
(512 << 20), /* 512 MB RAM configuration */
|
|
{
|
|
CONFIG_SYS_MDDRC_SYS_CFG,
|
|
CONFIG_SYS_MDDRC_TIME_CFG0,
|
|
CONFIG_SYS_MDDRC_TIME_CFG1,
|
|
CONFIG_SYS_MDDRC_TIME_CFG2
|
|
}
|
|
},
|
|
{
|
|
(128 << 20), /* 128 MB RAM configuration */
|
|
{
|
|
CONFIG_SYS_MDDRC_SYS_CFG_ALT1,
|
|
CONFIG_SYS_MDDRC_TIME_CFG0_ALT1,
|
|
CONFIG_SYS_MDDRC_TIME_CFG1_ALT1,
|
|
CONFIG_SYS_MDDRC_TIME_CFG2_ALT1
|
|
}
|
|
},
|
|
};
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
int i;
|
|
u32 msize = 0;
|
|
u32 pdm360ng_init_seq[] = {
|
|
CONFIG_SYS_DDRCMD_NOP,
|
|
CONFIG_SYS_DDRCMD_NOP,
|
|
CONFIG_SYS_DDRCMD_NOP,
|
|
CONFIG_SYS_DDRCMD_NOP,
|
|
CONFIG_SYS_DDRCMD_NOP,
|
|
CONFIG_SYS_DDRCMD_NOP,
|
|
CONFIG_SYS_DDRCMD_NOP,
|
|
CONFIG_SYS_DDRCMD_NOP,
|
|
CONFIG_SYS_DDRCMD_NOP,
|
|
CONFIG_SYS_DDRCMD_NOP,
|
|
CONFIG_SYS_DDRCMD_PCHG_ALL,
|
|
CONFIG_SYS_DDRCMD_NOP,
|
|
CONFIG_SYS_DDRCMD_RFSH,
|
|
CONFIG_SYS_DDRCMD_NOP,
|
|
CONFIG_SYS_DDRCMD_RFSH,
|
|
CONFIG_SYS_DDRCMD_NOP,
|
|
CONFIG_SYS_MICRON_INIT_DEV_OP,
|
|
CONFIG_SYS_DDRCMD_NOP,
|
|
CONFIG_SYS_DDRCMD_EM2,
|
|
CONFIG_SYS_DDRCMD_NOP,
|
|
CONFIG_SYS_DDRCMD_PCHG_ALL,
|
|
CONFIG_SYS_DDRCMD_EM2,
|
|
CONFIG_SYS_DDRCMD_EM3,
|
|
CONFIG_SYS_DDRCMD_EN_DLL,
|
|
CONFIG_SYS_DDRCMD_RES_DLL,
|
|
CONFIG_SYS_DDRCMD_PCHG_ALL,
|
|
CONFIG_SYS_DDRCMD_RFSH,
|
|
CONFIG_SYS_DDRCMD_RFSH,
|
|
CONFIG_SYS_MICRON_INIT_DEV_OP,
|
|
CONFIG_SYS_DDRCMD_OCD_DEFAULT,
|
|
CONFIG_SYS_DDRCMD_OCD_EXIT,
|
|
CONFIG_SYS_DDRCMD_PCHG_ALL,
|
|
CONFIG_SYS_DDRCMD_NOP
|
|
};
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mddrc_config); i++) {
|
|
msize = fixed_sdram(&mddrc_config[i].cfg, pdm360ng_init_seq,
|
|
ARRAY_SIZE(pdm360ng_init_seq));
|
|
if (msize == mddrc_config[i].size)
|
|
break;
|
|
}
|
|
|
|
return msize;
|
|
}
|
|
|
|
static int set_lcd_brightness(char *);
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
|
|
|
/*
|
|
* Re-configure flash setup using auto-detected info
|
|
*/
|
|
if (flash_info[1].size > 0) {
|
|
out_be32(&im->sysconf.lpcs1aw,
|
|
CSAW_START(gd->bd->bi_flashstart + flash_info[1].size) |
|
|
CSAW_STOP(gd->bd->bi_flashstart + flash_info[1].size,
|
|
flash_info[1].size));
|
|
sync_law(&im->sysconf.lpcs1aw);
|
|
/*
|
|
* Re-check to get correct base address
|
|
*/
|
|
flash_get_size (gd->bd->bi_flashstart + flash_info[1].size, 1);
|
|
} else {
|
|
/* Disable Bank 1 */
|
|
out_be32(&im->sysconf.lpcs1aw, 0x01000100);
|
|
sync_law(&im->sysconf.lpcs1aw);
|
|
}
|
|
|
|
out_be32(&im->sysconf.lpcs0aw,
|
|
CSAW_START(gd->bd->bi_flashstart) |
|
|
CSAW_STOP(gd->bd->bi_flashstart, flash_info[0].size));
|
|
sync_law(&im->sysconf.lpcs0aw);
|
|
|
|
/*
|
|
* Re-check to get correct base address
|
|
*/
|
|
flash_get_size (gd->bd->bi_flashstart, 0);
|
|
|
|
/*
|
|
* Re-do flash protection upon new addresses
|
|
*/
|
|
flash_protect (FLAG_PROTECT_CLEAR,
|
|
gd->bd->bi_flashstart, 0xffffffff,
|
|
&flash_info[0]);
|
|
|
|
/* Monitor protection ON by default */
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CONFIG_SYS_MONITOR_BASE,
|
|
CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
|
|
&flash_info[0]);
|
|
|
|
/* Environment protection ON by default */
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CONFIG_ENV_ADDR,
|
|
CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
|
|
&flash_info[0]);
|
|
|
|
#ifdef CONFIG_ENV_ADDR_REDUND
|
|
/* Redundant environment protection ON by default */
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CONFIG_ENV_ADDR_REDUND,
|
|
CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
|
|
&flash_info[0]);
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_DIU_FB
|
|
set_lcd_brightness(0);
|
|
/* Switch LCD-Backlight and LVDS-Interface on */
|
|
setbits_be32(&im->gpio.gpdir, 0x01040000);
|
|
clrsetbits_be32(&im->gpio.gpdat, 0x01000000, 0x00040000);
|
|
#endif
|
|
|
|
#if defined(CONFIG_HARD_I2C)
|
|
if (!getenv("ethaddr")) {
|
|
uchar buf[6];
|
|
uchar ifm_oui[3] = { 0, 2, 1, };
|
|
int ret;
|
|
|
|
/* I2C-0 for on-board eeprom */
|
|
i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS_NUM);
|
|
|
|
/* Read ethaddr from EEPROM */
|
|
ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR,
|
|
CONFIG_SYS_I2C_EEPROM_MAC_OFFSET, 1, buf, 6);
|
|
if (ret != 0) {
|
|
printf("Error: Unable to read MAC from I2C"
|
|
" EEPROM at address %02X:%02X\n",
|
|
CONFIG_SYS_I2C_EEPROM_ADDR,
|
|
CONFIG_SYS_I2C_EEPROM_MAC_OFFSET);
|
|
return 1;
|
|
}
|
|
|
|
/* Owned by IFM ? */
|
|
if (memcmp(buf, ifm_oui, sizeof(ifm_oui))) {
|
|
printf("Illegal MAC address in EEPROM: %pM\n", buf);
|
|
return 1;
|
|
}
|
|
|
|
eth_setenv_enetaddr("ethaddr", buf);
|
|
}
|
|
#endif /* defined(CONFIG_HARD_I2C) */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static iopin_t ioregs_init[] = {
|
|
/* FUNC1=LPC_CS4 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_pata_ce1), 1, 0,
|
|
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(1) |
|
|
IO_PIN_PUE(1) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
|
},
|
|
/* FUNC3=GPIO10 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_pata_ce2), 1, 0,
|
|
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
|
|
},
|
|
/* FUNC1=CAN3_TX */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_pata_isolate), 1, 0,
|
|
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
|
|
},
|
|
/* FUNC3=GPIO14 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_pata_iochrdy), 1, 0,
|
|
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
|
|
},
|
|
/* FUNC2=DIU_LD22 Sets Next 2 to DIU_LD pads */
|
|
/* DIU_LD22-DIU_LD23 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_pci_ad31), 2, 0,
|
|
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
|
|
},
|
|
/* FUNC2=USB1_DATA7 Sets Next 12 to USB1 pads */
|
|
/* USB1_DATA7-USB1_DATA0, USB1_STOP, USB1_NEXT, USB1_CLK, USB1_DIR */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_pci_ad29), 12, 0,
|
|
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
|
|
},
|
|
/* FUNC1=VIU_DATA0 Sets Next 3 to VIU_DATA pads */
|
|
/* VIU_DATA0-VIU_DATA2 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_pci_ad17), 3, 0,
|
|
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
|
|
},
|
|
/* FUNC2=FEC_TXD_0 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_pci_ad14), 1, 0,
|
|
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
|
|
},
|
|
/* FUNC1=VIU_DATA3 Sets Next 2 to VIU_DATA pads */
|
|
/* VIU_DATA3, VIU_DATA4 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_pci_ad13), 2, 0,
|
|
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
|
|
},
|
|
/* FUNC2=FEC_RXD_1 Sets Next 12 to FEC pads */
|
|
/* FEC_RXD_1, FEC_RXD_0, FEC_RX_CLK, FEC_TX_CLK, FEC_RX_ER, FEC_RX_DV */
|
|
/* FEC_TX_EN, FEC_TX_ER, FEC_CRS, FEC_MDC, FEC_MDIO, FEC_COL */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_pci_ad11), 12, 0,
|
|
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
|
|
},
|
|
/* FUNC2=DIU_LD03 Sets Next 25 to DIU pads */
|
|
/* DIU_LD00-DIU_LD21 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_pci_cbe0), 22, 0,
|
|
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
|
|
},
|
|
/* FUNC2=DIU_CLK Sets Next 3 to DIU pads */
|
|
/* DIU_CLK, DIU_VSYNC, DIU_HSYNC */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0,
|
|
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
|
},
|
|
/* FUNC2=CAN3_RX */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_irq1), 1, 0,
|
|
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
|
|
},
|
|
/* Sets lowest slew on 2 CAN_TX Pins*/
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_can1_tx), 2, 0,
|
|
IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
|
|
},
|
|
/* FUNC3=CAN4_TX Sets Next 2 to CAN4 pads */
|
|
/* CAN4_TX, CAN4_RX */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_j1850_tx), 2, 0,
|
|
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
|
|
},
|
|
/* FUNC3=GPIO8 Sets Next 2 to GPIO pads */
|
|
/* GPIO8, GPIO9 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc0_0), 2, 0,
|
|
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
|
|
},
|
|
/* FUNC1=FEC_TXD_1 Sets Next 3 to FEC pads */
|
|
/* FEC_TXD_1, FEC_TXD_2, FEC_TXD_3 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc0_4), 3, 0,
|
|
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
|
},
|
|
/* FUNC1=FEC_RXD_3 Sets Next 2 to FEC pads */
|
|
/* FEC_RXD_3, FEC_RXD_2 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc1_4), 2, 0,
|
|
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
|
},
|
|
/* FUNC3=GPIO17 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc2_1), 1, 0,
|
|
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
|
|
},
|
|
/* FUNC3=GPIO2/GPT2 Sets Next 3 to GPIO pads */
|
|
/* GPIO2, GPIO20, GPIO21 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc2_4), 3, 0,
|
|
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
|
|
},
|
|
/* FUNC2=VIU_PIX_CLK */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc3_4), 1, 0,
|
|
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
|
},
|
|
/* FUNC3=GPIO24 Sets Next 2 to GPIO pads */
|
|
/* GPIO24, GPIO25 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc4_0), 2, 0,
|
|
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
|
|
},
|
|
/* FUNC1=NFC_CE2 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc4_4), 1, 0,
|
|
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(1) |
|
|
IO_PIN_PUE(1) | IO_PIN_ST(0) | IO_PIN_DS(0)
|
|
},
|
|
/* FUNC2=VIU_DATA5 Sets Next 5 to VIU_DATA pads */
|
|
/* VIU_DATA5-VIU_DATA9 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc5_0), 5, 0,
|
|
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
|
},
|
|
/* FUNC1=LPC_TSIZ1 Sets Next 2 to LPC_TSIZ pads */
|
|
/* LPC_TSIZ1-LPC_TSIZ2 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc6_0), 2, 0,
|
|
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
|
},
|
|
/* FUNC1=LPC_TS */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc6_4), 1, 0,
|
|
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
|
},
|
|
/* FUNC3=GPIO16 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc7_0), 1, 0,
|
|
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
|
|
},
|
|
/* FUNC3=GPIO18 Sets Next 3 to GPIO pads */
|
|
/* GPIO18-GPIO19, GPT7/GPIO7 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc7_2), 3, 0,
|
|
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
|
|
},
|
|
/* FUNC3=GPIO0/GPT0 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc8_4), 1, 0,
|
|
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
|
|
},
|
|
/* FUNC3=GPIO11 Sets Next 4 to GPIO pads */
|
|
/* GPIO11, GPIO2, GPIO12, GPIO13 */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc10_3), 4, 0,
|
|
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
|
|
},
|
|
/* FUNC2=DIU_DE */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc11_4), 1, 0,
|
|
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
|
}
|
|
};
|
|
|
|
int checkboard (void)
|
|
{
|
|
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
|
|
|
puts("Board: PDM360NG\n");
|
|
|
|
/* initialize function mux & slew rate IO inter alia on IO Pins */
|
|
|
|
iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init));
|
|
|
|
/* initialize IO_CONTROL_GP (GPIO/GPT-mux-register) */
|
|
setbits_be32(&im->io_ctrl.io_control_gp,
|
|
(1 << 0) | /* GP_MUX7->GPIO7 */
|
|
(1 << 5)); /* GP_MUX2->GPIO2 */
|
|
|
|
/* configure GPIO24 (VIU_CE), output/high */
|
|
setbits_be32(&im->gpio.gpdir, 0x80);
|
|
setbits_be32(&im->gpio.gpdat, 0x80);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
|
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
|
|
struct node_info nodes[] = {
|
|
{ "fsl,mpc5121-nfc", MTD_DEV_TYPE_NAND, },
|
|
{ "cfi-flash", MTD_DEV_TYPE_NOR, },
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_VIDEO)
|
|
/*
|
|
* EDID block has been generated using Phoenix EDID Designer 1.3.
|
|
* This tool creates a text file containing:
|
|
*
|
|
* EDID BYTES:
|
|
* 0x 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
|
|
* ------------------------------------------------
|
|
* 00 | 00 FF FF FF FF FF FF 00 42 C9 34 12 01 00 00 00
|
|
* 10 | 0A 0C 01 03 80 98 5B 78 CA 7E 50 A0 58 4E 96 25
|
|
* 20 | 1E 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
|
|
* 30 | 01 01 01 01 01 01 80 0C 20 00 31 E0 2D 10 2A 80
|
|
* 40 | 12 08 30 E4 10 00 00 18 00 00 00 FD 00 38 3C 1F
|
|
* 50 | 3C 04 0A 20 20 20 20 20 20 20 00 00 00 FF 00 50
|
|
* 60 | 4D 30 37 30 57 4C 33 0A 0A 0A 0A 0A 00 00 00 FF
|
|
* 70 | 00 41 30 30 30 30 30 30 30 30 30 30 30 31 00 D4
|
|
*
|
|
* Then this data has been manually converted to the char
|
|
* array below.
|
|
*/
|
|
static unsigned char edid_buf[128] = {
|
|
0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
|
|
0x42, 0xC9, 0x34, 0x12, 0x01, 0x00, 0x00, 0x00,
|
|
0x0A, 0x0C, 0x01, 0x03, 0x80, 0x98, 0x5B, 0x78,
|
|
0xCA, 0x7E, 0x50, 0xA0, 0x58, 0x4E, 0x96, 0x25,
|
|
0x1E, 0x50, 0x54, 0x00, 0x00, 0x00, 0x01, 0x01,
|
|
0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
|
|
0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x80, 0x0C,
|
|
0x20, 0x00, 0x31, 0xE0, 0x2D, 0x10, 0x2A, 0x80,
|
|
0x12, 0x08, 0x30, 0xE4, 0x10, 0x00, 0x00, 0x18,
|
|
0x00, 0x00, 0x00, 0xFD, 0x00, 0x38, 0x3C, 0x1F,
|
|
0x3C, 0x04, 0x0A, 0x20, 0x20, 0x20, 0x20, 0x20,
|
|
0x20, 0x20, 0x00, 0x00, 0x00, 0xFF, 0x00, 0x50,
|
|
0x4D, 0x30, 0x37, 0x30, 0x57, 0x4C, 0x33, 0x0A,
|
|
0x0A, 0x0A, 0x0A, 0x0A, 0x00, 0x00, 0x00, 0xFF,
|
|
0x00, 0x41, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
|
|
0x30, 0x30, 0x30, 0x30, 0x30, 0x31, 0x00, 0xD4,
|
|
};
|
|
#endif
|
|
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
u32 val[8];
|
|
int rc, i = 0;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
|
|
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
|
|
#endif
|
|
#if defined(CONFIG_VIDEO)
|
|
fdt_add_edid(blob, "fsl,mpc5121-diu", edid_buf);
|
|
#endif
|
|
|
|
/* Fixup NOR FLASH mapping */
|
|
val[i++] = 0; /* chip select number */
|
|
val[i++] = 0; /* always 0 */
|
|
val[i++] = gd->bd->bi_flashstart;
|
|
val[i++] = gd->bd->bi_flashsize;
|
|
|
|
/* Fixup MRAM mapping */
|
|
val[i++] = 2; /* chip select number */
|
|
val[i++] = 0; /* always 0 */
|
|
val[i++] = CONFIG_SYS_MRAM_BASE;
|
|
val[i++] = CONFIG_SYS_MRAM_SIZE;
|
|
|
|
rc = fdt_find_and_setprop(blob, "/localbus", "ranges",
|
|
val, i * sizeof(u32), 1);
|
|
if (rc)
|
|
printf("Unable to update localbus ranges, err=%s\n",
|
|
fdt_strerror(rc));
|
|
|
|
/* Fixup reg property in NOR Flash node */
|
|
i = 0;
|
|
val[i++] = 0; /* always 0 */
|
|
val[i++] = 0; /* start at offset 0 */
|
|
val[i++] = flash_info[0].size; /* size of Bank 0 */
|
|
|
|
/* Second Bank available? */
|
|
if (flash_info[1].size > 0) {
|
|
val[i++] = 0; /* always 0 */
|
|
val[i++] = flash_info[0].size; /* offset of Bank 1 */
|
|
val[i++] = flash_info[1].size; /* size of Bank 1 */
|
|
}
|
|
|
|
rc = fdt_find_and_setprop(blob, "/localbus/flash", "reg",
|
|
val, i * sizeof(u32), 1);
|
|
if (rc)
|
|
printf("Unable to update flash reg property, err=%s\n",
|
|
fdt_strerror(rc));
|
|
|
|
return 0;
|
|
}
|
|
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
|
|
|
|
/*
|
|
* If argument is NULL, set the LCD brightness to the
|
|
* value from "brightness" environment variable. Set
|
|
* the LCD brightness to the value specified by the
|
|
* argument otherwise. Default brightness is zero.
|
|
*/
|
|
#define MAX_BRIGHTNESS 99
|
|
static int set_lcd_brightness(char *brightness)
|
|
{
|
|
struct stdio_dev *cop_port;
|
|
char *env;
|
|
char cmd_buf[20];
|
|
int val = 0;
|
|
int cs = 0;
|
|
int len, i;
|
|
|
|
if (brightness) {
|
|
val = simple_strtol(brightness, NULL, 10);
|
|
} else {
|
|
env = getenv("brightness");
|
|
if (env)
|
|
val = simple_strtol(env, NULL, 10);
|
|
}
|
|
|
|
if (val < 0)
|
|
val = 0;
|
|
|
|
if (val > MAX_BRIGHTNESS)
|
|
val = MAX_BRIGHTNESS;
|
|
|
|
sprintf(cmd_buf, "$SB;%04d;", val);
|
|
|
|
len = strlen(cmd_buf);
|
|
for (i = 1; i <= len; i++)
|
|
cs += cmd_buf[i];
|
|
|
|
cs = (~cs + 1) & 0xff;
|
|
sprintf(cmd_buf + len, "%02X\n", cs);
|
|
|
|
/* IO Coprocessor communication */
|
|
cop_port = open_port(4, CONFIG_SYS_PDM360NG_COPROC_BAUDRATE);
|
|
if (!cop_port) {
|
|
printf("Error: Can't open IO Coprocessor port.\n");
|
|
return -1;
|
|
}
|
|
|
|
debug("%s: cmd: %s", __func__, cmd_buf);
|
|
write_port(cop_port, cmd_buf);
|
|
/*
|
|
* Wait for transmission and maybe response data
|
|
* before closing the port.
|
|
*/
|
|
udelay(CONFIG_SYS_PDM360NG_COPROC_READ_DELAY);
|
|
memset(cmd_buf, 0, sizeof(cmd_buf));
|
|
len = read_port(cop_port, cmd_buf, sizeof(cmd_buf));
|
|
if (len)
|
|
printf("Error: %s\n", cmd_buf);
|
|
|
|
close_port(4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cmd_lcd_brightness(cmd_tbl_t *cmdtp, int flag,
|
|
int argc, char * const argv[])
|
|
{
|
|
if (argc < 2)
|
|
return cmd_usage(cmdtp);
|
|
|
|
return set_lcd_brightness(argv[1]);
|
|
}
|
|
|
|
U_BOOT_CMD(lcdbr, 2, 1, cmd_lcd_brightness,
|
|
"set LCD brightness",
|
|
"<brightness> - set LCD backlight level to <brightness>.\n"
|
|
);
|