mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 09:58:52 +09:00
![wdenk](/assets/img/avatar_default.png)
- remove trailing white space, trailing empty lines, C++ comments, etc. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) * Patches by Kenneth Johansson, 25 Jun 2003: - major rework of command structure (work done mostly by Michal Cendrowski and Joakim Kristiansen)
516 lines
14 KiB
C
516 lines
14 KiB
C
#include <common.h>
|
|
#include <pci.h>
|
|
#include <74xx_7xx.h>
|
|
|
|
|
|
#ifdef DEBUG
|
|
#undef DEBUG
|
|
#endif
|
|
|
|
#ifdef DEBUG
|
|
#define PRINTF(format, args...) _printf(format , ## args)
|
|
#else
|
|
#define PRINTF(format, argc...)
|
|
#endif
|
|
|
|
static pci_dev_t to_pci(int bus, int devfn)
|
|
{
|
|
return PCI_BDF(bus, (devfn>>3), devfn&3);
|
|
}
|
|
|
|
int mypci_find_device(int vendor, int product, int index)
|
|
{
|
|
return pci_find_device(vendor, product, index);
|
|
}
|
|
|
|
int mypci_bus(int device)
|
|
{
|
|
return PCI_BUS(device);
|
|
}
|
|
|
|
int mypci_devfn(int device)
|
|
{
|
|
return (PCI_DEV(device)<<3) | PCI_FUNC(device);
|
|
}
|
|
|
|
|
|
#define mypci_read_func(type, size) \
|
|
type mypci_read_cfg_##size##(int bus, int devfn, int offset) \
|
|
{ \
|
|
type c; \
|
|
pci_read_config_##size##(to_pci(bus, devfn), offset, &c); \
|
|
return c; \
|
|
}
|
|
|
|
#define mypci_write_func(type, size) \
|
|
void mypci_write_cfg_##size##(int bus, int devfn, int offset, int value) \
|
|
{ \
|
|
pci_write_config_##size##(to_pci(bus, devfn), offset, value); \
|
|
}
|
|
|
|
mypci_read_func(u8,byte);
|
|
mypci_read_func(u16,word);
|
|
|
|
mypci_write_func(u8,byte);
|
|
mypci_write_func(u16,word);
|
|
|
|
u32 mypci_read_cfg_long(int bus, int devfn, int offset)
|
|
{
|
|
u32 c;
|
|
pci_read_config_dword(to_pci(bus, devfn), offset, &c);
|
|
return c;
|
|
}
|
|
|
|
void mypci_write_cfg_long(int bus, int devfn, int offset, int value)
|
|
{
|
|
pci_write_config_dword(to_pci(bus, devfn), offset, value);
|
|
}
|
|
|
|
void _printf(const char *fmt, ...)
|
|
{
|
|
va_list args;
|
|
char buf[CFG_PBSIZE];
|
|
|
|
va_start(args, fmt);
|
|
(void)vsprintf(buf, fmt, args);
|
|
va_end(args);
|
|
|
|
printf(buf);
|
|
}
|
|
|
|
char *_getenv(char *name)
|
|
{
|
|
return getenv(name);
|
|
}
|
|
|
|
unsigned long get_bar_size(pci_dev_t dev, int offset)
|
|
{
|
|
u32 bar_back, bar_value;
|
|
|
|
/* Save old BAR value */
|
|
pci_read_config_dword(dev, offset, &bar_back);
|
|
|
|
/* Write all 1's. */
|
|
pci_write_config_dword(dev, offset, ~0);
|
|
|
|
/* Now read back the relevant bits */
|
|
pci_read_config_dword(dev, offset, &bar_value);
|
|
|
|
/* Restore original value */
|
|
pci_write_config_dword(dev, offset, bar_back);
|
|
|
|
if (bar_value == 0) return 0xFFFFFFFF; /* This BAR is disabled */
|
|
|
|
if ((bar_value & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY)
|
|
{
|
|
/* This is a memory space BAR. Mask it out so we get the size of it */
|
|
return ~(bar_value & PCI_BASE_ADDRESS_MEM_MASK) + 1;
|
|
}
|
|
|
|
/* Not suitable */
|
|
return 0xFFFFFFFF;
|
|
}
|
|
|
|
void enable_compatibility_hole(void)
|
|
{
|
|
u8 cfg;
|
|
pci_dev_t art = PCI_BDF(0,0,0);
|
|
|
|
pci_read_config_byte(art, 0x54, &cfg);
|
|
/* cfg |= 0x08; */
|
|
cfg |= 0x20;
|
|
pci_write_config_byte(art, 0x54, cfg);
|
|
}
|
|
|
|
void disable_compatibility_hole(void)
|
|
{
|
|
u8 cfg;
|
|
pci_dev_t art = PCI_BDF(0,0,0);
|
|
|
|
pci_read_config_byte(art, 0x54, &cfg);
|
|
/* cfg &= ~0x08; */
|
|
cfg &= ~0x20;
|
|
pci_write_config_byte(art, 0x54, cfg);
|
|
}
|
|
|
|
void map_rom(pci_dev_t dev, u32 address)
|
|
{
|
|
pci_write_config_dword(dev, PCI_ROM_ADDRESS, address|PCI_ROM_ADDRESS_ENABLE);
|
|
}
|
|
|
|
void unmap_rom(pci_dev_t dev)
|
|
{
|
|
pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0);
|
|
}
|
|
|
|
void bat_map(u8 batnum, u32 address, u32 length)
|
|
{
|
|
u32 temp = address;
|
|
address &= 0xFFFE0000;
|
|
temp &= 0x0001FFFF;
|
|
length = (length - 1 ) >> 17;
|
|
length <<= 2;
|
|
|
|
switch (batnum)
|
|
{
|
|
case 0:
|
|
__asm volatile ("mtdbatu 0, %0" : : "r" (address | length | 3));
|
|
__asm volatile ("mtdbatl 0, %0" : : "r" (address | 0x22));
|
|
break;
|
|
case 1:
|
|
__asm volatile ("mtdbatu 1, %0" : : "r" (address | length | 3));
|
|
__asm volatile ("mtdbatl 1, %0" : : "r" (address | 0x22));
|
|
break;
|
|
case 2:
|
|
__asm volatile ("mtdbatu 2, %0" : : "r" (address | length | 3));
|
|
__asm volatile ("mtdbatl 2, %0" : : "r" (address | 0x22));
|
|
break;
|
|
case 3:
|
|
__asm volatile ("mtdbatu 3, %0" : : "r" (address | length | 3));
|
|
__asm volatile ("mtdbatl 3, %0" : : "r" (address | 0x22));
|
|
break;
|
|
}
|
|
}
|
|
|
|
int find_image(u32 rom_address, u32 rom_size, void **image, u32 *image_size);
|
|
|
|
int attempt_map_rom(pci_dev_t dev, void *copy_address)
|
|
{
|
|
u32 rom_size = 0;
|
|
u32 rom_address = 0;
|
|
u32 bar_size = 0;
|
|
u32 bar_backup = 0;
|
|
int i,j;
|
|
void *image = 0;
|
|
u32 image_size = 0;
|
|
int did_correct = 0;
|
|
u32 prefetch_addr = 0;
|
|
u32 prefetch_size = 0;
|
|
u32 prefetch_idx = 0;
|
|
|
|
/* Get the size of the expansion rom */
|
|
pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0xFFFFFFFF);
|
|
pci_read_config_dword(dev, PCI_ROM_ADDRESS, &rom_size);
|
|
if ((rom_size & 0x01) == 0)
|
|
{
|
|
PRINTF("No ROM\n");
|
|
return 0;
|
|
}
|
|
|
|
rom_size &= 0xFFFFF800;
|
|
rom_size = (~rom_size)+1;
|
|
|
|
PRINTF("ROM Size is %dK\n", rom_size/1024);
|
|
|
|
/*
|
|
* Try to find a place for the ROM. We always attempt to use
|
|
* one of the card's bases for this, as this will be in any
|
|
* bridge's resource range as well as being free of conflicts
|
|
* with other cards. In a graphics card it is very unlikely
|
|
* that there won't be any base address that is large enough to
|
|
* hold the rom.
|
|
*
|
|
* FIXME: To work around this, theoretically the largest base
|
|
* could be used if none is found in the loop below.
|
|
*/
|
|
|
|
for (i = PCI_BASE_ADDRESS_0; i <= PCI_BASE_ADDRESS_5; i += 4)
|
|
{
|
|
bar_size = get_bar_size(dev, i);
|
|
PRINTF("PCI_BASE_ADDRESS_%d is %dK large\n",
|
|
(i - PCI_BASE_ADDRESS_0)/4,
|
|
bar_size/1024);
|
|
if (bar_size != 0xFFFFFFFF && bar_size >= rom_size)
|
|
{
|
|
PRINTF("Found a match for rom size\n");
|
|
pci_read_config_dword(dev, i, &rom_address);
|
|
rom_address &= 0xFFFFFFF0;
|
|
if (rom_address != 0 && rom_address != 0xFFFFFFF0) break;
|
|
}
|
|
}
|
|
|
|
if (rom_address == 0 || rom_address == 0xFFFFFFF0)
|
|
{
|
|
PRINTF("No suitable rom address found\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Disable the BAR */
|
|
pci_read_config_dword(dev, i, &bar_backup);
|
|
pci_write_config_dword(dev, i, 0);
|
|
|
|
/* Map ROM */
|
|
pci_write_config_dword(dev, PCI_ROM_ADDRESS, rom_address | PCI_ROM_ADDRESS_ENABLE);
|
|
|
|
/* Copy the rom to a place in the emulator space */
|
|
PRINTF("Claiming BAT 2\n");
|
|
bat_map(2, rom_address, rom_size);
|
|
/* show_bat_mapping(); */
|
|
|
|
if (0 == find_image(rom_address, rom_size, &image, &image_size))
|
|
{
|
|
PRINTF("No x86 BIOS image found\n");
|
|
return 0;
|
|
}
|
|
|
|
PRINTF("Copying %ld bytes from 0x%lx to 0x%lx\n", (long)image_size, (long)image, (long)copy_address);
|
|
|
|
/* memcpy(copy_address, rom_address, rom_size); */
|
|
{
|
|
unsigned char *from = (unsigned char *)image; /* rom_address; */
|
|
unsigned char *to = (unsigned char *)copy_address;
|
|
for (j=0; j<image_size /*rom_size*/; j++)
|
|
{
|
|
*to++ = *from++;
|
|
}
|
|
}
|
|
|
|
PRINTF("Copy is done\n");
|
|
|
|
/* Unmap the ROM and restore the BAR */
|
|
pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0);
|
|
pci_write_config_dword(dev, i, bar_backup);
|
|
|
|
/* FIXME: Shouldn't be needed anymore*/
|
|
/* bat_map(2, 0x80000000, 256*1024*1024);
|
|
show_bat_mapping(); */
|
|
|
|
/*
|
|
* Since most cards can probably only do 16 bit IO addressing, we
|
|
* correct their IO base into an appropriate value.
|
|
* This should do for most.
|
|
*/
|
|
for (i = PCI_BASE_ADDRESS_0; i <= PCI_BASE_ADDRESS_5; i += 4)
|
|
{
|
|
unsigned long value;
|
|
pci_read_config_dword(dev, i, &value);
|
|
if (value & 0x01) /* IO */
|
|
{
|
|
did_correct = 1;
|
|
pci_write_config_dword(dev, i, 0x1001);
|
|
break;
|
|
}
|
|
|
|
if (value & PCI_BASE_ADDRESS_MEM_PREFETCH)
|
|
{
|
|
prefetch_idx = i;
|
|
prefetch_addr = value & PCI_BASE_ADDRESS_MEM_MASK;
|
|
prefetch_size = get_bar_size(dev, i);
|
|
}
|
|
}
|
|
|
|
if (1) /* did_correct) */
|
|
{
|
|
extern pci_dev_t pci_find_bridge_for_bus(struct pci_controller *hose, int busnr);
|
|
int busnr = PCI_BUS(dev);
|
|
if (busnr)
|
|
{
|
|
pci_dev_t bridge;
|
|
PRINTF("Need to correct bridge device for IO range change\n");
|
|
bridge = pci_find_bridge_for_bus(NULL, busnr);
|
|
if (bridge == PCI_ANY_ID)
|
|
{
|
|
PRINTF("Didn't find bridge. Hope that's OK\n");
|
|
}
|
|
else
|
|
{
|
|
/*
|
|
* Set upper I/O base/limit to 0
|
|
*/
|
|
pci_write_config_byte(bridge, 0x30, 0x00);
|
|
pci_write_config_byte(bridge, 0x31, 0x00);
|
|
pci_write_config_byte(bridge, 0x32, 0x00);
|
|
pci_write_config_byte(bridge, 0x33, 0x00);
|
|
if (did_correct)
|
|
{
|
|
/*
|
|
* set lower I/O base to 1000
|
|
* That is, bits 0:3 are set to 0001 by default.
|
|
* bits 7:4 contain I/O address bits 15:12
|
|
* all others are assumed 0.
|
|
*/
|
|
pci_write_config_byte(bridge, 0x1C, 0x11);
|
|
/*
|
|
* Set lower I/O limit to 1FFF
|
|
* That is, bits 0:3 are reserved and always 0000
|
|
* Bits 7:4 contain I/O address bits 15:12
|
|
* All others are assumed F.
|
|
*/
|
|
pci_write_config_byte(bridge, 0x1D, 0x10);
|
|
pci_write_config_byte(bridge, 0x0D, 0x20);
|
|
PRINTF("Corrected bridge resource range of bridge at %02x:%02x:%02x\n",
|
|
PCI_BUS(bridge), PCI_DEV(bridge), PCI_FUNC(bridge));
|
|
|
|
}
|
|
else
|
|
{
|
|
/*
|
|
* This card doesn't have I/O, we disable I/O forwarding
|
|
*/
|
|
pci_write_config_byte(bridge, 0x1C, 0x11);
|
|
pci_write_config_byte(bridge, 0x1D, 0x00);
|
|
pci_write_config_byte(bridge, PCI_INTERRUPT_LINE, 0);
|
|
pci_write_config_byte(bridge, PCI_INTERRUPT_PIN, 0);
|
|
pci_write_config_dword(bridge, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_IO);
|
|
PRINTF("Disabled bridge resource range of bridge at %02x:%02x:%02x\n",
|
|
PCI_BUS(bridge), PCI_DEV(bridge), PCI_FUNC(bridge));
|
|
|
|
}
|
|
}
|
|
/*
|
|
* Correct the prefetchable memory base, which is not set correctly by
|
|
* the U-Boot autoconfig stuff
|
|
*/
|
|
if (prefetch_idx)
|
|
{
|
|
/* PRINTF("Setting prefetchable range to %x, %x (%x and %x)\n", */
|
|
/* prefetch_addr, prefetch_addr+prefetch_size, */
|
|
/* prefetch_addr>>16, (prefetch_addr+prefetch_size)>>16); */
|
|
/* pci_write_config_word(bridge, PCI_PREF_MEMORY_BASE, (prefetch_addr>>16)); */
|
|
/* pci_write_config_word(bridge, PCI_PREF_MEMORY_LIMIT, (prefetch_addr+prefetch_size)>>16); */
|
|
}
|
|
|
|
pci_write_config_word(bridge, PCI_PREF_MEMORY_BASE, 0x1000);
|
|
pci_write_config_word(bridge, PCI_PREF_MEMORY_LIMIT, 0x0000);
|
|
|
|
pci_write_config_byte(bridge, 0xD0, 0x0A);
|
|
pci_write_config_byte(bridge, 0xD3, 0x04);
|
|
|
|
/*
|
|
* Set the interrupt pin to 0
|
|
*/
|
|
#if 0
|
|
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 0);
|
|
pci_write_config_byte(dev, PCI_INTERRUPT_PIN, 0);
|
|
#endif
|
|
pci_write_config_byte(bridge, PCI_INTERRUPT_LINE, 0);
|
|
pci_write_config_byte(bridge, PCI_INTERRUPT_PIN, 0);
|
|
|
|
}
|
|
}
|
|
|
|
/* Finally, enable the card's IO and memory response */
|
|
pci_write_config_dword(dev, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
|
|
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0);
|
|
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0);
|
|
|
|
return 1;
|
|
}
|
|
|
|
int find_image(u32 rom_address, u32 rom_size, void **image, u32 *image_size)
|
|
{
|
|
int i = 0;
|
|
unsigned char *rom = (unsigned char *)rom_address;
|
|
/* if (*rom != 0x55 || *(rom+1) != 0xAA) return 0; /* No bios rom this is, yes. */ */
|
|
|
|
for (;;)
|
|
{
|
|
unsigned short pci_data_offset = *(rom+0x18) + 256 * *(rom+0x19);
|
|
unsigned short pci_image_length = (*(rom+pci_data_offset+0x10) + 256 * *(rom+pci_data_offset+0x11)) * 512;
|
|
unsigned char pci_image_type = *(rom+pci_data_offset+0x14);
|
|
if (*rom != 0x55 || *(rom+1) != 0xAA)
|
|
{
|
|
PRINTF("Invalid header this is\n");
|
|
return 0;
|
|
}
|
|
PRINTF("Image %i: Type %d (%s)\n", i++, pci_image_type,
|
|
pci_image_type==0 ? "x86" :
|
|
pci_image_type==1 ? "OpenFirmware" :
|
|
"Unknown");
|
|
if (pci_image_type == 0)
|
|
{
|
|
*image = rom;
|
|
*image_size = pci_image_length;
|
|
return 1;
|
|
}
|
|
|
|
if (*(rom+pci_data_offset+0x15) & 0x80)
|
|
{
|
|
PRINTF("LAST image encountered, no image found\n");
|
|
return 0;
|
|
}
|
|
|
|
rom += pci_image_length;
|
|
}
|
|
}
|
|
|
|
void show_bat_mapping(void)
|
|
{
|
|
u32 dbat0u, dbat0l, ibat0u, ibat0l;
|
|
u32 dbat1u, dbat1l, ibat1u, ibat1l;
|
|
u32 dbat2u, dbat2l, ibat2u, ibat2l;
|
|
u32 dbat3u, dbat3l, ibat3u, ibat3l;
|
|
u32 msr, hid0, l2cr_reg;
|
|
|
|
__asm volatile ("mfdbatu %0,0" : "=r" (dbat0u));
|
|
__asm volatile ("mfdbatl %0,0" : "=r" (dbat0l));
|
|
__asm volatile ("mfibatu %0,0" : "=r" (ibat0u));
|
|
__asm volatile ("mfibatl %0,0" : "=r" (ibat0l));
|
|
|
|
__asm volatile ("mfdbatu %0,1" : "=r" (dbat1u));
|
|
__asm volatile ("mfdbatl %0,1" : "=r" (dbat1l));
|
|
__asm volatile ("mfibatu %0,1" : "=r" (ibat1u));
|
|
__asm volatile ("mfibatl %0,1" : "=r" (ibat1l));
|
|
|
|
__asm volatile ("mfdbatu %0,2" : "=r" (dbat2u));
|
|
__asm volatile ("mfdbatl %0,2" : "=r" (dbat2l));
|
|
__asm volatile ("mfibatu %0,2" : "=r" (ibat2u));
|
|
__asm volatile ("mfibatl %0,2" : "=r" (ibat2l));
|
|
|
|
__asm volatile ("mfdbatu %0,3" : "=r" (dbat3u));
|
|
__asm volatile ("mfdbatl %0,3" : "=r" (dbat3l));
|
|
__asm volatile ("mfibatu %0,3" : "=r" (ibat3u));
|
|
__asm volatile ("mfibatl %0,3" : "=r" (ibat3l));
|
|
|
|
__asm volatile ("mfmsr %0" : "=r" (msr));
|
|
__asm volatile ("mfspr %0,1008": "=r" (hid0));
|
|
__asm volatile ("mfspr %0,1017": "=r" (l2cr_reg));
|
|
|
|
printf("dbat0u: %08x dbat0l: %08x ibat0u: %08x ibat0l: %08x\n",
|
|
dbat0u, dbat0l, ibat0u, ibat0l);
|
|
printf("dbat1u: %08x dbat1l: %08x ibat1u: %08x ibat1l: %08x\n",
|
|
dbat1u, dbat1l, ibat1u, ibat1l);
|
|
printf("dbat2u: %08x dbat2l: %08x ibat2u: %08x ibat2l: %08x\n",
|
|
dbat2u, dbat2l, ibat2u, ibat2l);
|
|
printf("dbat3u: %08x dbat3l: %08x ibat3u: %08x ibat3l: %08x\n",
|
|
dbat3u, dbat3l, ibat3u, ibat3l);
|
|
|
|
printf("\nMSR: %08x HID0: %08x L2CR: %08x \n", msr,hid0, l2cr_reg);
|
|
}
|
|
|
|
|
|
void remove_init_data(void)
|
|
{
|
|
char *s;
|
|
|
|
/* Invalidate and disable data cache */
|
|
invalidate_l1_data_cache();
|
|
dcache_disable();
|
|
|
|
s = getenv("x86_cache");
|
|
|
|
if (!s)
|
|
{
|
|
icache_enable();
|
|
dcache_enable();
|
|
}
|
|
else if (s)
|
|
{
|
|
if (strcmp(s, "dcache")==0)
|
|
{
|
|
dcache_enable();
|
|
}
|
|
else if (strcmp(s, "icache") == 0)
|
|
{
|
|
icache_enable();
|
|
}
|
|
else if (strcmp(s, "on")== 0 || strcmp(s, "both") == 0)
|
|
{
|
|
dcache_enable();
|
|
icache_enable();
|
|
}
|
|
}
|
|
|
|
/* show_bat_mapping();*/
|
|
}
|