mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 23:48:52 +09:00
![Heiko Schocher](/assets/img/avatar_default.png)
- CONFIG_SYS_MAX_I2C_BUS changed to 1 We use only one I2C hardwarecontroller on this boards, so change the CONFIG_SYS_MAX_I2C_BUS to 1. - common: dont print errormsg if second IVM Block lacks. - 82xx, mgcoge: fix double mtdpart entry in environment - 82xx, mgcoge: activate on second Flash the second bank. - common: CONFIG_ENV_SIZE 0x4000 for all keymile boards - common: Change malloc size to 1MByte for all Keymile boards We need a bigger malloc area for the environment support (128k) on some Keymile boards (kmeter1) and the upcoming UBI support. Change it to 1MB for all Keymile boards to be on the save side. Also define CONFIG_SYS_64BIT_VSPRINTF which is needed for UBI/UBIFS support. - Add UBI support to all Keymile boards - change manner of writing "/localbus/ranges" node instead of writting the complete "/localbus/ranges" node before booting Linux, only update the ranges entries which gets dynamical detected (size of flashes). This is needed, because keymile adds in the DTS "/localbus/ranges" node entries, which u-boot must not overwrite/delete. - kmeter, mgcoge: define 2 seperate regions needed for the Intel P30 chips The Intel P30 chip has 2 non-identical chips on one die, so we need to define 2 seperate regions that are scanned by physmap_of independantly. - kmeter1: Add MTD concat support to Keymile boards - 82xx, mgcoge: add "unlock=yes" to default environment - added CONFIG_MTD_DEVICE to get in sync with mainline code Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
235 lines
6.3 KiB
C
235 lines
6.3 KiB
C
/*
|
|
* (C) Copyright 2007
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
#include <common.h>
|
|
#include <mpc8xx.h>
|
|
#include <net.h>
|
|
#include <asm/io.h>
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
|
|
#include <libfdt.h>
|
|
#endif
|
|
|
|
#include "../common/common.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
const uint sdram_table[] =
|
|
{
|
|
0x0f07fc04, 0x0ffffc04, 0x00bdfc04, 0x0ff77c00,
|
|
0x1ffffc05, 0xfffffc04, 0xfffffc04, 0xfffffc04,
|
|
/* 0x08 Burst Read */
|
|
0x0f07fc04, 0x0ffffc04, 0x00bdfc04, 0x00fffc00,
|
|
0x00fffc00, 0x00fffc00, 0x0ff77c00, 0x1ffffc05,
|
|
/* 0x10 Load mode register */
|
|
0x0ffffc34, 0x0ff57c04, 0x0ffffc04, 0x1ffffc05,
|
|
0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
|
|
/* 0x18 Single Write */
|
|
0x0f07fc04, 0x0ffffc00, 0x00bd7c04, 0x0ffffc04,
|
|
0x0ff77c04, 0x1ffffc05, 0xfffffc04, 0xfffffc04,
|
|
/* 0x20 Burst Write */
|
|
0x0f07fc04, 0x0ffffc00, 0x00bd7c00, 0x00fffc00,
|
|
0x00fffc00, 0x00fffc04, 0x0ffffc04, 0x0ff77c04,
|
|
0x1ffffc05, 0xfffffc04, 0xfffffc04, 0xfffffc04,
|
|
0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
|
|
/* 0x30 Precharge all and Refresh */
|
|
0x0ff77c04, 0x0ffffc04, 0x0ff5fc84, 0x0ffffc04,
|
|
0x0ffffc04, 0x0ffffc84, 0x1ffffc05, 0xfffffc04,
|
|
0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
|
|
/* 0x3C Exception */
|
|
0x7ffffc04, 0xfffffc07, 0xfffffc04, 0xfffffc04,
|
|
};
|
|
|
|
int checkboard (void)
|
|
{
|
|
puts ("Board: Keymile ");
|
|
#if defined(CONFIG_KMSUPX4)
|
|
puts ("kmsupx4");
|
|
#else
|
|
puts ("mgsuvd");
|
|
#endif
|
|
if (ethernet_present ())
|
|
puts (" with PIGGY.");
|
|
puts ("\n");
|
|
return (0);
|
|
}
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
long int size;
|
|
|
|
upmconfig (UPMB, (uint *) sdram_table,
|
|
sizeof (sdram_table) / sizeof (uint));
|
|
|
|
/*
|
|
* Preliminary prescaler for refresh (depends on number of
|
|
* banks): This value is selected for four cycles every 62.4 us
|
|
* with two SDRAM banks or four cycles every 31.2 us with one
|
|
* bank. It will be adjusted after memory sizing.
|
|
*/
|
|
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
|
|
|
|
/*
|
|
* The following value is used as an address (i.e. opcode) for
|
|
* the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If
|
|
* the port size is 32bit the SDRAM does NOT "see" the lower two
|
|
* address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for
|
|
* MICRON SDRAMs:
|
|
* -> 0 00 010 0 010
|
|
* | | | | +- Burst Length = 4
|
|
* | | | +----- Burst Type = Sequential
|
|
* | | +------- CAS Latency = 2
|
|
* | +----------- Operating Mode = Standard
|
|
* +-------------- Write Burst Mode = Programmed Burst Length
|
|
*/
|
|
memctl->memc_mar = CONFIG_SYS_MAR;
|
|
|
|
/*
|
|
* Map controller banks 1 to the SDRAM banks 1 at
|
|
* preliminary addresses - these have to be modified after the
|
|
* SDRAM size has been determined.
|
|
*/
|
|
memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
|
|
memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
|
|
|
|
memctl->memc_mbmr = CONFIG_SYS_MBMR & (~(MBMR_PTBE)); /* no refresh yet */
|
|
|
|
udelay (200);
|
|
|
|
/* perform SDRAM initializsation sequence */
|
|
|
|
memctl->memc_mcr = 0x80802830; /* SDRAM bank 0 */
|
|
udelay (1);
|
|
memctl->memc_mcr = 0x80802110; /* SDRAM bank 0 - execute twice */
|
|
udelay (1);
|
|
|
|
memctl->memc_mbmr |= MBMR_PTBE; /* enable refresh */
|
|
|
|
udelay (1000);
|
|
|
|
/*
|
|
* Check Bank 0 Memory Size for re-configuration
|
|
*
|
|
*/
|
|
size = get_ram_size(SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
|
|
|
|
udelay (1000);
|
|
|
|
debug ("SDRAM Bank 0: %ld MB\n", size >> 20);
|
|
|
|
return (size);
|
|
}
|
|
|
|
/*
|
|
* Early board initalization.
|
|
*/
|
|
int board_early_init_r(void)
|
|
{
|
|
/* setup the UPIOx */
|
|
out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x02), 0xc0);
|
|
out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x03), 0x35);
|
|
return 0;
|
|
}
|
|
|
|
int hush_init_var (void)
|
|
{
|
|
ivm_read_eeprom ();
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
|
|
/*
|
|
* update "memory" property in the blob
|
|
*/
|
|
void ft_blob_update (void *blob, bd_t *bd)
|
|
{
|
|
ulong brg_data[1] = {0};
|
|
ulong memory_data[2] = {0};
|
|
ulong *flash_data = NULL;
|
|
ulong flash_reg[3] = {0};
|
|
flash_info_t *info;
|
|
int len;
|
|
int i = 0;
|
|
|
|
memory_data[0] = cpu_to_be32 (bd->bi_memstart);
|
|
memory_data[1] = cpu_to_be32 (bd->bi_memsize);
|
|
fdt_set_node_and_value (blob, "/memory", "reg", memory_data,
|
|
sizeof (memory_data));
|
|
|
|
len = fdt_get_node_and_value (blob, "/localbus", "ranges",
|
|
(void *)&flash_data);
|
|
|
|
if (flash_data == NULL) {
|
|
printf ("%s: error /localbus/ranges entry\n", __FUNCTION__);
|
|
return;
|
|
}
|
|
|
|
/* update Flash addr, size */
|
|
while ( i < (len / 4)) {
|
|
switch (flash_data[i]) {
|
|
case 0:
|
|
info = flash_get_info(CONFIG_SYS_FLASH_BASE);
|
|
flash_data[i + 1] = 0;
|
|
flash_data[i + 2] = cpu_to_be32 (CONFIG_SYS_FLASH_BASE);
|
|
flash_data[i + 3] = cpu_to_be32 (info->size);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
i += 4;
|
|
}
|
|
fdt_set_node_and_value (blob, "/localbus", "ranges", flash_data,
|
|
len);
|
|
|
|
flash_reg[2] = cpu_to_be32 (bd->bi_flashsize);
|
|
fdt_set_node_and_value (blob, "/localbus/flash@0,0", "reg", flash_reg,
|
|
sizeof (flash_reg));
|
|
/* BRG */
|
|
brg_data[0] = cpu_to_be32 (bd->bi_busfreq);
|
|
fdt_set_node_and_value (blob, "/soc/cpm", "brg-frequency", brg_data,
|
|
sizeof (brg_data));
|
|
|
|
/* MAC adr */
|
|
fdt_set_node_and_value (blob, "/soc/cpm/ethernet", "mac-address",
|
|
bd->bi_enetaddr, sizeof (u8) * 6);
|
|
}
|
|
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup (blob, bd);
|
|
ft_blob_update (blob, bd);
|
|
}
|
|
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
|
|
|
|
int i2c_soft_read_pin (void)
|
|
{
|
|
int val;
|
|
|
|
*(unsigned short *)(I2C_BASE_DIR) &= ~SDA_CONF;
|
|
udelay(1);
|
|
val = *(unsigned char *)(I2C_BASE_PORT);
|
|
|
|
return ((val & SDA_BIT) == SDA_BIT);
|
|
}
|