mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-30 05:48:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
195 lines
4.7 KiB
C
195 lines
4.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2007
|
|
* Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
|
|
*/
|
|
|
|
/*
|
|
* Epson RX8025 RTC driver.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <rtc.h>
|
|
#include <i2c.h>
|
|
|
|
#if defined(CONFIG_CMD_DATE)
|
|
|
|
/*---------------------------------------------------------------------*/
|
|
#undef DEBUG_RTC
|
|
|
|
#ifdef DEBUG_RTC
|
|
#define DEBUGR(fmt,args...) printf(fmt ,##args)
|
|
#else
|
|
#define DEBUGR(fmt,args...)
|
|
#endif
|
|
/*---------------------------------------------------------------------*/
|
|
|
|
#ifndef CONFIG_SYS_I2C_RTC_ADDR
|
|
# define CONFIG_SYS_I2C_RTC_ADDR 0x32
|
|
#endif
|
|
|
|
/*
|
|
* RTC register addresses
|
|
*/
|
|
#define RTC_SEC_REG_ADDR 0x00
|
|
#define RTC_MIN_REG_ADDR 0x01
|
|
#define RTC_HR_REG_ADDR 0x02
|
|
#define RTC_DAY_REG_ADDR 0x03
|
|
#define RTC_DATE_REG_ADDR 0x04
|
|
#define RTC_MON_REG_ADDR 0x05
|
|
#define RTC_YR_REG_ADDR 0x06
|
|
|
|
#define RTC_CTL1_REG_ADDR 0x0e
|
|
#define RTC_CTL2_REG_ADDR 0x0f
|
|
|
|
/*
|
|
* Control register 1 bits
|
|
*/
|
|
#define RTC_CTL1_BIT_2412 0x20
|
|
|
|
/*
|
|
* Control register 2 bits
|
|
*/
|
|
#define RTC_CTL2_BIT_PON 0x10
|
|
#define RTC_CTL2_BIT_VDET 0x40
|
|
#define RTC_CTL2_BIT_XST 0x20
|
|
#define RTC_CTL2_BIT_VDSL 0x80
|
|
|
|
/*
|
|
* Note: the RX8025 I2C RTC requires register
|
|
* reads and write to consist of a single bus
|
|
* cycle. It is not allowed to write the register
|
|
* address in a first cycle that is terminated by
|
|
* a STOP condition. The chips needs a 'restart'
|
|
* sequence (start sequence without a prior stop).
|
|
* This driver has been written for a 4xx board.
|
|
* U-Boot's 4xx i2c driver is currently not capable
|
|
* to generate such cycles to some work arounds
|
|
* are used.
|
|
*/
|
|
|
|
/* static uchar rtc_read (uchar reg); */
|
|
#define rtc_read(reg) buf[((reg) + 1) & 0xf]
|
|
|
|
static void rtc_write (uchar reg, uchar val);
|
|
|
|
/*
|
|
* Get the current time from the RTC
|
|
*/
|
|
int rtc_get (struct rtc_time *tmp)
|
|
{
|
|
int rel = 0;
|
|
uchar sec, min, hour, mday, wday, mon, year, ctl2;
|
|
uchar buf[16];
|
|
|
|
if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 16))
|
|
printf("Error reading from RTC\n");
|
|
|
|
sec = rtc_read(RTC_SEC_REG_ADDR);
|
|
min = rtc_read(RTC_MIN_REG_ADDR);
|
|
hour = rtc_read(RTC_HR_REG_ADDR);
|
|
wday = rtc_read(RTC_DAY_REG_ADDR);
|
|
mday = rtc_read(RTC_DATE_REG_ADDR);
|
|
mon = rtc_read(RTC_MON_REG_ADDR);
|
|
year = rtc_read(RTC_YR_REG_ADDR);
|
|
|
|
DEBUGR ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
|
|
"hr: %02x min: %02x sec: %02x\n",
|
|
year, mon, mday, wday, hour, min, sec);
|
|
|
|
/* dump status */
|
|
ctl2 = rtc_read(RTC_CTL2_REG_ADDR);
|
|
if (ctl2 & RTC_CTL2_BIT_PON) {
|
|
printf("RTC: power-on detected\n");
|
|
rel = -1;
|
|
}
|
|
|
|
if (ctl2 & RTC_CTL2_BIT_VDET) {
|
|
printf("RTC: voltage drop detected\n");
|
|
rel = -1;
|
|
}
|
|
|
|
if (!(ctl2 & RTC_CTL2_BIT_XST)) {
|
|
printf("RTC: oscillator stop detected\n");
|
|
rel = -1;
|
|
}
|
|
|
|
tmp->tm_sec = bcd2bin (sec & 0x7F);
|
|
tmp->tm_min = bcd2bin (min & 0x7F);
|
|
if (rtc_read(RTC_CTL1_REG_ADDR) & RTC_CTL1_BIT_2412)
|
|
tmp->tm_hour = bcd2bin (hour & 0x3F);
|
|
else
|
|
tmp->tm_hour = bcd2bin (hour & 0x1F) % 12 +
|
|
((hour & 0x20) ? 12 : 0);
|
|
tmp->tm_mday = bcd2bin (mday & 0x3F);
|
|
tmp->tm_mon = bcd2bin (mon & 0x1F);
|
|
tmp->tm_year = bcd2bin (year) + ( bcd2bin (year) >= 70 ? 1900 : 2000);
|
|
tmp->tm_wday = bcd2bin (wday & 0x07);
|
|
tmp->tm_yday = 0;
|
|
tmp->tm_isdst= 0;
|
|
|
|
DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
|
|
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
|
|
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
|
|
|
|
return rel;
|
|
}
|
|
|
|
/*
|
|
* Set the RTC
|
|
*/
|
|
int rtc_set (struct rtc_time *tmp)
|
|
{
|
|
DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
|
|
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
|
|
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
|
|
|
|
if (tmp->tm_year < 1970 || tmp->tm_year > 2069)
|
|
printf("WARNING: year should be between 1970 and 2069!\n");
|
|
|
|
rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100));
|
|
rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon));
|
|
rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday));
|
|
rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday));
|
|
rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
|
|
rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
|
|
rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
|
|
|
|
rtc_write (RTC_CTL1_REG_ADDR, RTC_CTL1_BIT_2412);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Reset the RTC
|
|
*/
|
|
void rtc_reset (void)
|
|
{
|
|
uchar buf[16];
|
|
uchar ctl2;
|
|
|
|
if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 16))
|
|
printf("Error reading from RTC\n");
|
|
|
|
ctl2 = rtc_read(RTC_CTL2_REG_ADDR);
|
|
ctl2 &= ~(RTC_CTL2_BIT_PON | RTC_CTL2_BIT_VDET);
|
|
ctl2 |= RTC_CTL2_BIT_XST | RTC_CTL2_BIT_VDSL;
|
|
rtc_write (RTC_CTL2_REG_ADDR, ctl2);
|
|
}
|
|
|
|
/*
|
|
* Helper functions
|
|
*/
|
|
static void rtc_write (uchar reg, uchar val)
|
|
{
|
|
uchar buf[2];
|
|
buf[0] = reg << 4;
|
|
buf[1] = val;
|
|
if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 2) != 0)
|
|
printf("Error writing to RTC\n");
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_RTC_RX8025 && CONFIG_CMD_DATE */
|