u-boot-brain/arch/arm/mach-rmobile/Kconfig.32
Marek Vasut a6759e3dfc ARM: rmobile: gen2: Enable ACTLR[0] (Enable invalidates of BTB) to facilitate CVE_2017-5715 WA in OS
Enable CVE_2017_5715 mitigation on CPU0 on R-Car H2, M2W, M2N, V2H,
which all contain Cortex-A15 cores. R-Car E2 contains only Cortex-A7
cores and is not affected. Without this enabled, Linux kernel reports:

  CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable

With this enabled, Linux kernel reports:

  CPU0: Spectre v2: using ICIALLU workaround

NOTE: This by itself does not enable the workaround for other CPUs
      than CPU0 and may require additional kernel patches for the
      other CPUs in SMP configurations.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-07-25 00:14:19 +02:00

153 lines
2.9 KiB
Plaintext

if RCAR_32
config ARCH_RMOBILE_BOARD_STRING
string "Renesas RCar Gen2 board name"
default "Board"
config RCAR_GEN2
bool "Renesas RCar Gen2"
config R8A7740
bool "Renesas SoC R8A7740"
config R8A7790
bool "Renesas SoC R8A7790"
select RCAR_GEN2
select ARM_CORTEX_A15_CVE_2017_5715
config R8A7791
bool "Renesas SoC R8A7791"
select RCAR_GEN2
select ARM_CORTEX_A15_CVE_2017_5715
config R8A7792
bool "Renesas SoC R8A7792"
select RCAR_GEN2
select ARM_CORTEX_A15_CVE_2017_5715
config R8A7793
bool "Renesas SoC R8A7793"
select RCAR_GEN2
select ARM_CORTEX_A15_CVE_2017_5715
config R8A7794
bool "Renesas SoC R8A7794"
select RCAR_GEN2
choice
prompt "Renesas ARM SoCs board select"
optional
config TARGET_ARMADILLO_800EVA
bool "armadillo 800 eva board"
config TARGET_BLANCHE
bool "Blanche board"
select DM
select DM_SERIAL
select USE_TINY_PRINTF
config TARGET_GOSE
bool "Gose board"
select DM
select DM_SERIAL
select SUPPORT_SPL
select USE_TINY_PRINTF
select SPL_TINY_MEMSET
config TARGET_KOELSCH
bool "Koelsch board"
select DM
select DM_SERIAL
select SUPPORT_SPL
select USE_TINY_PRINTF
select SPL_TINY_MEMSET
config TARGET_LAGER
bool "Lager board"
select DM
select DM_SERIAL
select SUPPORT_SPL
select USE_TINY_PRINTF
select SPL_TINY_MEMSET
config TARGET_KZM9G
bool "KZM9D board"
config TARGET_ALT
bool "Alt board"
select DM
select DM_SERIAL
select SUPPORT_SPL
select USE_TINY_PRINTF
select SPL_TINY_MEMSET
config TARGET_SILK
bool "Silk board"
select DM
select DM_SERIAL
select SUPPORT_SPL
select USE_TINY_PRINTF
select SPL_TINY_MEMSET
config TARGET_PORTER
bool "Porter board"
select DM
select DM_SERIAL
select SUPPORT_SPL
select USE_TINY_PRINTF
select SPL_TINY_MEMSET
config TARGET_STOUT
bool "Stout board"
select DM
select DM_SERIAL
select SUPPORT_SPL
select USE_TINY_PRINTF
select SPL_TINY_MEMSET
endchoice
config SYS_SOC
default "rmobile"
config RMOBILE_EXTRAM_BOOT
bool "Enable boot from RAM"
depends on TARGET_ALT || TARGET_BLANCHE || TARGET_KOELSCH || TARGET_LAGER || TARGET_PORTER || TARGET_SILK || TARGET_STOUT
default n
choice
prompt "Qos setting primary"
depends on TARGET_ALT || TARGET_BLANCHE || TARGET_GOSE || TARGET_KOELSCH || TARGET_LAGER
default QOS_PRI_NORMAL
config QOS_PRI_NORMAL
bool "Non primary"
help
Select normal mode for QoS setting.
config QOS_PRI_MEDIA
bool "Media primary"
help
Select multimedia primary mode for QoS setting.
config QOS_PRI_GFX
bool "GFX primary"
help
Select GFX(graphics) primary mode for QoS setting.
endchoice
source "board/atmark-techno/armadillo-800eva/Kconfig"
source "board/renesas/blanche/Kconfig"
source "board/renesas/gose/Kconfig"
source "board/renesas/koelsch/Kconfig"
source "board/renesas/lager/Kconfig"
source "board/kmc/kzm9g/Kconfig"
source "board/renesas/alt/Kconfig"
source "board/renesas/silk/Kconfig"
source "board/renesas/porter/Kconfig"
source "board/renesas/stout/Kconfig"
endif