brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-07-22 19:09:43 +09:00
Code Issues Projects Releases Wiki Activity
6d83e3ac61
u-boot-brain/cpu/ppc4xx/cpu_init.c
Mike Frysinger 6bacfa6a8e cpu/: get mac address from environment 
The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

The cpus that get converted here:
	at91rm9200
	mpc512x
	mpc5xxx
	mpc8260
	mpc8xx
	ppc4xx

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: John Rigby <jrigby@freescale.com>
CC: Stefan Roese <sr@denx.de>
2009-03-20 22:39:11 +01:00

365 lines
10 KiB
C
Raw Blame History

/*
* (C) Copyright 2000-2007
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <watchdog.h>
#include <ppc4xx_enet.h>
#include <asm/processor.h>
#include <asm/gpio.h>
#include <ppc4xx.h>
#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
DECLARE_GLOBAL_DATA_PTR;
#endif
#ifndef CONFIG_SYS_PLL_RECONFIG
#define CONFIG_SYS_PLL_RECONFIG 0
#endif
void reconfigure_pll(u32 new_cpu_freq)
{
#if defined(CONFIG_440EPX)
int reset_needed = 0;
u32 reg, temp;
u32 prbdv0, target_prbdv0, /* CLK_PRIMBD */
fwdva, target_fwdva, fwdvb, target_fwdvb, /* CLK_PLLD */
fbdv, target_fbdv, lfbdv, target_lfbdv,
perdv0, target_perdv0, /* CLK_PERD */
spcid0, target_spcid0; /* CLK_SPCID */
/* Reconfigure clocks if necessary.
* See PPC440EPx User's Manual, sections 8.2 and 14 */
if (new_cpu_freq == 667) {
target_prbdv0 = 2;
target_fwdva = 2;
target_fwdvb = 4;
target_fbdv = 20;
target_lfbdv = 1;
target_perdv0 = 4;
target_spcid0 = 4;
mfcpr(clk_primbd, reg);
temp = (reg & PRBDV_MASK) >> 24;
prbdv0 = temp ? temp : 8;
if (prbdv0 != target_prbdv0) {
reg &= ~PRBDV_MASK;
reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24);
mtcpr(clk_primbd, reg);
reset_needed = 1;
}
mfcpr(clk_plld, reg);
temp = (reg & PLLD_FWDVA_MASK) >> 16;
fwdva = temp ? temp : 16;
temp = (reg & PLLD_FWDVB_MASK) >> 8;
fwdvb = temp ? temp : 8;
temp = (reg & PLLD_FBDV_MASK) >> 24;
fbdv = temp ? temp : 32;
temp = (reg & PLLD_LFBDV_MASK);
lfbdv = temp ? temp : 64;
if (fwdva != target_fwdva || fbdv != target_fbdv || lfbdv != target_lfbdv) {
reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
reg |= ((target_fwdva == 16 ? 0 : target_fwdva) << 16) |
((target_fwdvb == 8 ? 0 : target_fwdvb) << 8) |
((target_fbdv == 32 ? 0 : target_fbdv) << 24) |
(target_lfbdv == 64 ? 0 : target_lfbdv);
mtcpr(clk_plld, reg);
reset_needed = 1;
}
mfcpr(clk_perd, reg);
perdv0 = (reg & CPR0_PERD_PERDV0_MASK) >> 24;
if (perdv0 != target_perdv0) {
reg &= ~CPR0_PERD_PERDV0_MASK;
reg |= (target_perdv0 << 24);
mtcpr(clk_perd, reg);
reset_needed = 1;
}
mfcpr(clk_spcid, reg);
temp = (reg & CPR0_SPCID_SPCIDV0_MASK) >> 24;
spcid0 = temp ? temp : 4;
if (spcid0 != target_spcid0) {
reg &= ~CPR0_SPCID_SPCIDV0_MASK;
reg |= ((target_spcid0 == 4 ? 0 : target_spcid0) << 24);
mtcpr(clk_spcid, reg);
reset_needed = 1;
}
/* Set reload inhibit so configuration will persist across
* processor resets */
mfcpr(clk_icfg, reg);
reg &= ~CPR0_ICFG_RLI_MASK;
reg |= 1 << 31;
mtcpr(clk_icfg, reg);
}
/* Reset processor if configuration changed */
if (reset_needed) {
__asm__ __volatile__ ("sync; isync");
mtspr(dbcr0, 0x20000000);
}
#endif
}
/*
* Breath some life into the CPU...
*
* Reconfigure PLL if necessary,
* set up the memory map,
* initialize a bunch of registers
*/
void
cpu_init_f (void)
{
#if defined(CONFIG_WATCHDOG) || defined(CONFIG_440GX) || defined(CONFIG_460EX)
u32 val;
#endif
reconfigure_pll(CONFIG_SYS_PLL_RECONFIG);
#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CONFIG_SYS_4xx_GPIO_TABLE)
/*
* GPIO0 setup (select GPIO or alternate function)
*/
#if defined(CONFIG_SYS_GPIO0_OR)
out32(GPIO0_OR, CONFIG_SYS_GPIO0_OR); /* set initial state of output pins */
#endif
#if defined(CONFIG_SYS_GPIO0_ODR)
out32(GPIO0_ODR, CONFIG_SYS_GPIO0_ODR); /* open-drain select */
#endif
out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH); /* output select */
out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H); /* input select */
out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH); /* three-state select */
out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
#if defined(CONFIG_SYS_GPIO0_ISR2H)
out32(GPIO0_ISR2H, CONFIG_SYS_GPIO0_ISR2H);
out32(GPIO0_ISR2L, CONFIG_SYS_GPIO0_ISR2L);
#endif
#if defined (CONFIG_SYS_GPIO0_TCR)
out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR); /* enable output driver for outputs */
#endif
#endif /* CONFIG_405EP ... && !CONFIG_SYS_4xx_GPIO_TABLE */
#if defined (CONFIG_405EP)
/*
* Set EMAC noise filter bits
*/
mtdcr(cpc0_epctl, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
/*
* Enable the internal PCI arbiter
*/
mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
#endif /* CONFIG_405EP */
#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
gpio_set_chip_configuration();
#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
/*
* External Bus Controller (EBC) Setup
*/
#if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
#if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
defined(CONFIG_405EX) || defined(CONFIG_405))
/*
* Move the next instructions into icache, since these modify the flash
* we are running from!
*/
asm volatile(" bl 0f" ::: "lr");
asm volatile("0: mflr 3" ::: "r3");
asm volatile(" addi 4, 0, 14" ::: "r4");
asm volatile(" mtctr 4" ::: "ctr");
asm volatile("1: icbt 0, 3");
asm volatile(" addi 3, 3, 32" ::: "r3");
asm volatile(" bdnz 1b" ::: "ctr", "cr0");
asm volatile(" addis 3, 0, 0x0" ::: "r3");
asm volatile(" ori 3, 3, 0xA000" ::: "r3");
asm volatile(" mtctr 3" ::: "ctr");
asm volatile("2: bdnz 2b" ::: "ctr", "cr0");
#endif
mtebc(pb0ap, CONFIG_SYS_EBC_PB0AP);
mtebc(pb0cr, CONFIG_SYS_EBC_PB0CR);
#endif
#if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 1))
mtebc(pb1ap, CONFIG_SYS_EBC_PB1AP);
mtebc(pb1cr, CONFIG_SYS_EBC_PB1CR);
#endif
#if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 2))
mtebc(pb2ap, CONFIG_SYS_EBC_PB2AP);
mtebc(pb2cr, CONFIG_SYS_EBC_PB2CR);
#endif
#if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 3))
mtebc(pb3ap, CONFIG_SYS_EBC_PB3AP);
mtebc(pb3cr, CONFIG_SYS_EBC_PB3CR);
#endif
#if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 4))
mtebc(pb4ap, CONFIG_SYS_EBC_PB4AP);
mtebc(pb4cr, CONFIG_SYS_EBC_PB4CR);
#endif
#if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 5))
mtebc(pb5ap, CONFIG_SYS_EBC_PB5AP);
mtebc(pb5cr, CONFIG_SYS_EBC_PB5CR);
#endif
#if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 6))
mtebc(pb6ap, CONFIG_SYS_EBC_PB6AP);
mtebc(pb6cr, CONFIG_SYS_EBC_PB6CR);
#endif
#if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 7))
mtebc(pb7ap, CONFIG_SYS_EBC_PB7AP);
mtebc(pb7cr, CONFIG_SYS_EBC_PB7CR);
#endif
#if defined (CONFIG_SYS_EBC_CFG)
mtebc(EBC0_CFG, CONFIG_SYS_EBC_CFG);
#endif
#if defined(CONFIG_WATCHDOG)
val = mfspr(tcr);
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
val |= 0xb8000000; /* generate system reset after 1.34 seconds */
#elif defined(CONFIG_440EPX)
val |= 0xb0000000; /* generate system reset after 1.34 seconds */
#else
val |= 0xf0000000; /* generate system reset after 2.684 seconds */
#endif
#if defined(CONFIG_SYS_4xx_RESET_TYPE)
val &= ~0x30000000; /* clear WRC bits */
val |= CONFIG_SYS_4xx_RESET_TYPE << 28; /* set board specific WRC type */
#endif
mtspr(tcr, val);
val = mfspr(tsr);
val |= 0x80000000; /* enable watchdog timer */
mtspr(tsr, val);
reset_4xx_watchdog();
#endif /* CONFIG_WATCHDOG */
#if defined(CONFIG_440GX)
/* Take the GX out of compatibility mode
* Travis Sawyer, 9 Mar 2004
* NOTE: 440gx user manual inconsistency here
* Compatibility mode and Ethernet Clock select are not
* correct in the manual
*/
mfsdr(sdr_mfr, val);
val &= ~0x10000000;
mtsdr(sdr_mfr,val);
#endif /* CONFIG_440GX */
#if defined(CONFIG_460EX)
/*
* Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and
* clear SDR0_AHB_CFG[A2P_PROT2] (bit 25) for a new 460EX errata
* regarding concurrent use of AHB USB OTG, USB 2.0 host and SATA
*/
mfsdr(SDR0_AHB_CFG, val);
val |= 0x80;
val &= ~0x40;
mtsdr(SDR0_AHB_CFG, val);
mfsdr(SDR0_USB2HOST_CFG, val);
val &= ~0xf00;
val |= 0x400;
mtsdr(SDR0_USB2HOST_CFG, val);
#endif /* CONFIG_460EX */
#if defined(CONFIG_405EX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_460SX)
/*
* Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read
*/
mtdcr(plb0_acr, (mfdcr(plb0_acr) & ~plb0_acr_rdp_mask) |
plb0_acr_rdp_4deep);
mtdcr(plb1_acr, (mfdcr(plb1_acr) & ~plb1_acr_rdp_mask) |
plb1_acr_rdp_4deep);
#endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */
}
/*
* initialize higher level parts of CPU like time base and timers
*/
int cpu_init_r (void)
{
#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
bd_t *bd = gd->bd;
unsigned long reg;
uchar enetaddr[6];
#if defined(CONFIG_405GP)
uint pvr = get_pvr();
#endif
/*
* Write Ethernetaddress into on-chip register
*/
reg = 0x00000000;
eth_getenv_enetaddr("ethaddr", enetaddr);
reg |= enetaddr[0]; /* set high address */
reg = reg << 8;
reg |= enetaddr[1];
out32 (EMAC_IAH, reg);
reg = 0x00000000;
reg |= enetaddr[2]; /* set low address */
reg = reg << 8;
reg |= enetaddr[3];
reg = reg << 8;
reg |= enetaddr[4];
reg = reg << 8;
reg |= enetaddr[5];
out32 (EMAC_IAL, reg);
#if defined(CONFIG_405GP)
/*
* Set edge conditioning circuitry on PPC405GPr
* for compatibility to existing PPC405GP designs.
*/
if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
mtdcr(ecr, 0x60606000);
}
#endif /* defined(CONFIG_405GP) */
#endif /* defined(CONFIG_405GP) || defined(CONFIG_405EP) */
return (0);
}
Reference in New Issue View Git Blame Copy Permalink