mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-27 04:18:51 +09:00
![Manivannan Sadhasivam](/assets/img/avatar_default.png)
This commit adds devicetree for Hikey960 board. Most of the contents are copied from Linux kernel with some modifications for u-boot. To be more precise, SD card's speed related properties are removed due to a bug in u-boot clock implementation. Hence forcing the SD controller to work in standard speed. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
608 lines
13 KiB
Plaintext
608 lines
13 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* dts file for Hisilicon HiKey960 Development Board
|
|
*
|
|
* Copyright (C) 2016, Hisilicon Ltd.
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "hi3660.dtsi"
|
|
#include "hikey960-pinctrl.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
model = "HiKey960";
|
|
compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
|
|
|
|
aliases {
|
|
mshc1 = &dwmmc1;
|
|
mshc2 = &dwmmc2;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
serial3 = &uart3;
|
|
serial4 = &uart4;
|
|
serial5 = &uart5;
|
|
serial6 = &uart6;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial6:115200n8";
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
/* rewrite this at bootloader */
|
|
reg = <0x0 0x0 0x0 0x0>;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
ramoops@32000000 {
|
|
compatible = "ramoops";
|
|
reg = <0x0 0x32000000 0x0 0x00100000>;
|
|
record-size = <0x00020000>;
|
|
console-size = <0x00020000>;
|
|
ftrace-size = <0x00020000>;
|
|
};
|
|
};
|
|
|
|
reboot-mode-syscon@32100000 {
|
|
compatible = "syscon", "simple-mfd";
|
|
reg = <0x0 0x32100000 0x0 0x00001000>;
|
|
|
|
reboot-mode {
|
|
compatible = "syscon-reboot-mode";
|
|
offset = <0x0>;
|
|
|
|
mode-normal = <0x77665501>;
|
|
mode-bootloader = <0x77665500>;
|
|
mode-recovery = <0x77665502>;
|
|
};
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>;
|
|
|
|
power {
|
|
wakeup-source;
|
|
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
|
|
label = "GPIO Power";
|
|
linux,code = <KEY_POWER>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
user_led1 {
|
|
label = "green:user1";
|
|
/* gpio_150_user_led1 */
|
|
gpios = <&gpio18 6 0>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
|
|
user_led2 {
|
|
label = "green:user2";
|
|
/* gpio_151_user_led2 */
|
|
gpios = <&gpio18 7 0>;
|
|
linux,default-trigger = "none";
|
|
};
|
|
|
|
user_led3 {
|
|
label = "green:user3";
|
|
/* gpio_189_user_led3 */
|
|
gpios = <&gpio23 5 0>;
|
|
linux,default-trigger = "mmc0";
|
|
};
|
|
|
|
user_led4 {
|
|
label = "green:user4";
|
|
/* gpio_190_user_led4 */
|
|
gpios = <&gpio23 6 0>;
|
|
panic-indicator;
|
|
linux,default-trigger = "none";
|
|
};
|
|
|
|
wlan_active_led {
|
|
label = "yellow:wlan";
|
|
/* gpio_205_wifi_active */
|
|
gpios = <&gpio25 5 0>;
|
|
linux,default-trigger = "phy0tx";
|
|
default-state = "off";
|
|
};
|
|
|
|
bt_active_led {
|
|
label = "blue:bt";
|
|
gpios = <&gpio25 7 0>;
|
|
/* gpio_207_user_led1 */
|
|
linux,default-trigger = "hci0-power";
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
pmic: pmic@fff34000 {
|
|
compatible = "hisilicon,hi6421v530-pmic";
|
|
reg = <0x0 0xfff34000 0x0 0x1000>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
regulators {
|
|
ldo3: LDO3 { /* HDMI */
|
|
regulator-name = "VOUT3_1V85";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2200000>;
|
|
regulator-enable-ramp-delay = <120>;
|
|
};
|
|
|
|
ldo9: LDO9 { /* SDCARD I/O */
|
|
regulator-name = "VOUT9_1V8_2V95";
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-enable-ramp-delay = <240>;
|
|
};
|
|
|
|
ldo11: LDO11 { /* Low Speed Connector */
|
|
regulator-name = "VOUT11_1V8_2V95";
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-enable-ramp-delay = <240>;
|
|
};
|
|
|
|
ldo15: LDO15 { /* UFS VCC */
|
|
regulator-name = "VOUT15_3V0";
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-enable-ramp-delay = <120>;
|
|
};
|
|
|
|
ldo16: LDO16 { /* SD VDD */
|
|
regulator-name = "VOUT16_2V95";
|
|
regulator-min-microvolt = <1750000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-enable-ramp-delay = <360>;
|
|
};
|
|
};
|
|
};
|
|
|
|
wlan_en: wlan-en-1-8v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "wlan-en-regulator";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
/* GPIO_051_WIFI_EN */
|
|
gpio = <&gpio6 3 0>;
|
|
|
|
/* WLAN card specific delay */
|
|
startup-delay-us = <70000>;
|
|
enable-active-high;
|
|
};
|
|
|
|
firmware {
|
|
optee {
|
|
compatible = "linaro,optee-tz";
|
|
method = "smc";
|
|
};
|
|
};
|
|
};
|
|
|
|
/*
|
|
* Legend: proper name = the GPIO line is used as GPIO
|
|
* NC = not connected (pin out but not routed from the chip to
|
|
* anything the board)
|
|
* "[PER]" = pin is muxed for [peripheral] (not GPIO)
|
|
* "" = no idea, schematic doesn't say, could be
|
|
* unrouted (not connected to any external pin)
|
|
* LSEC = Low Speed External Connector
|
|
* HSEC = High Speed External Connector
|
|
*
|
|
* Line names are taken from "HiKey 960 Board ver A" schematics
|
|
* from Huawei. The 40 pin low speed expansion connector is named
|
|
* J2002 63453-140LF.
|
|
*
|
|
* For the lines routed to the external connectors the
|
|
* lines are named after the 96Boards CE Specification 1.0,
|
|
* Appendix "Expansion Connector Signal Description".
|
|
*
|
|
* When the 96Board naming of a line and the schematic name of
|
|
* the same line are in conflict, the 96Board specification
|
|
* takes precedence, which means that the external UART on the
|
|
* LSEC is named UART0 while the schematic and SoC names this
|
|
* UART3. This is only for the informational lines i.e. "[FOO]",
|
|
* the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
|
|
* ones actually used for GPIO.
|
|
*/
|
|
&gpio0 {
|
|
/* GPIO_000-GPIO_007 */
|
|
gpio-line-names =
|
|
"",
|
|
"TP901", /* TEST_MODE connected to TP901 */
|
|
"[PMU0_SSI]",
|
|
"[PMU1_SSI]",
|
|
"[PMU2_SSI]",
|
|
"[PMU0_CLKOUT]",
|
|
"[JTAG_TCK]",
|
|
"[JTAG_TMS]";
|
|
};
|
|
|
|
&gpio1 {
|
|
/* GPIO_008-GPIO_015 */
|
|
gpio-line-names =
|
|
"[JTAG_TRST_N]",
|
|
"[JTAG_TDI]",
|
|
"[JTAG_TDO]",
|
|
"NC", "NC",
|
|
"[I2C3_SCL]",
|
|
"[I2C3_SDA]",
|
|
"NC";
|
|
};
|
|
|
|
&gpio2 {
|
|
/* GPIO_016-GPIO_023 */
|
|
gpio-line-names =
|
|
"NC", "NC", "NC",
|
|
"GPIO-J", /* LSEC pin 32: GPIO_019 */
|
|
"GPIO_020_HDMI_SEL",
|
|
"GPIO-L", /* LSEC pin 34: GPIO_021 */
|
|
"GPIO_022_UFSBUCK_INT_N",
|
|
"GPIO-G"; /* LSEC pin 29: LCD_TE0 */
|
|
};
|
|
|
|
&gpio3 {
|
|
/* GPIO_024-GPIO_031 */
|
|
/* The rail from pin BK36 is named LCD_TE0, we assume to be muxed as GPIO for GPIO-G */
|
|
gpio-line-names =
|
|
"[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */
|
|
"[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */
|
|
"NC",
|
|
"[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */
|
|
"[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */
|
|
"[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */
|
|
"[I2C3_SDA]", /* HSEC pin 38: ISP_SDA1 */
|
|
"NC";
|
|
};
|
|
|
|
&gpio4 {
|
|
/* GPIO_032-GPIO_039 */
|
|
gpio-line-names =
|
|
"NC", "NC",
|
|
"PWR_BTN_N", /* LSEC pin 4: GPIO_034_PWRON_DET */
|
|
"GPIO_035_PMU2_EN",
|
|
"GPIO_036_USB_HUB_RESET",
|
|
"NC", "NC", "NC";
|
|
};
|
|
|
|
&gpio5 {
|
|
/* GPIO_040-GPIO_047 */
|
|
gpio-line-names =
|
|
"GPIO-H", /* LSEC pin 30: GPIO_040_LCD_RST_N */
|
|
"GPIO_041_HDMI_PD",
|
|
"TP904", /* Test point */
|
|
"TP905", /* Test point */
|
|
"NC", "NC",
|
|
"GPIO_046_HUB_VDD33_EN",
|
|
"GPIO_047_PMU1_EN";
|
|
};
|
|
|
|
&gpio6 {
|
|
/* GPIO_048-GPIO_055 */
|
|
gpio-line-names =
|
|
"NC", "NC", "NC",
|
|
"GPIO_051_WIFI_EN",
|
|
"GPIO-I", /* LSEC pin 31: GPIO_052_CAM0_RST_N */
|
|
/*
|
|
* These two pins should be used for SD(IO) data according to the
|
|
* 96boards specification but seems to be repurposed for a IRDA UART.
|
|
* They are however named according to the spec.
|
|
*/
|
|
"[SD_DAT1]", /* HSEC pin 3: UART0_IRDA_RXD */
|
|
"[SD_DAT2]", /* HSEC pin 5: UART0_IRDA_TXD */
|
|
"[UART1_RXD]"; /* LSEC pin 13: DEBUG_UART6_RXD */
|
|
};
|
|
|
|
&gpio7 {
|
|
/* GPIO_056-GPIO_063 */
|
|
gpio-line-names =
|
|
"[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */
|
|
"[UART0_CTS]", /* LSEC pin 3: UART3_CTS_N */
|
|
"[UART0_RTS]", /* LSEC pin 9: UART3_RTS_N */
|
|
"[UART0_RXD]", /* LSEC pin 7: UART3_RXD */
|
|
"[UART0_TXD]", /* LSEC pin 5: UART3_TXD */
|
|
"[SOC_BT_UART4_CTS_N]",
|
|
"[SOC_BT_UART4_RTS_N]",
|
|
"[SOC_BT_UART4_RXD]";
|
|
};
|
|
|
|
&gpio8 {
|
|
/* GPIO_064-GPIO_071 */
|
|
gpio-line-names =
|
|
"[SOC_BT_UART4_TXD]",
|
|
"NC",
|
|
"[PMU_HKADC_SSI]",
|
|
"NC",
|
|
"GPIO_068_SEL",
|
|
"NC", "NC", "NC";
|
|
|
|
};
|
|
|
|
&gpio9 {
|
|
/* GPIO_072-GPIO_079 */
|
|
gpio-line-names =
|
|
"NC", "NC", "NC",
|
|
"GPIO-K", /* LSEC pin 33: GPIO_075_CAM1_RST_N */
|
|
"NC", "NC", "NC", "NC";
|
|
};
|
|
|
|
&gpio10 {
|
|
/* GPIO_080-GPIO_087 */
|
|
gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
|
|
};
|
|
|
|
&gpio11 {
|
|
/* GPIO_088-GPIO_095 */
|
|
gpio-line-names =
|
|
"NC",
|
|
"[PCIE_PERST_N]",
|
|
"NC", "NC", "NC", "NC", "NC", "NC";
|
|
};
|
|
|
|
&gpio12 {
|
|
/* GPIO_096-GPIO_103 */
|
|
gpio-line-names = "NC", "NC", "NC", "", "", "", "", "NC";
|
|
};
|
|
|
|
&gpio13 {
|
|
/* GPIO_104-GPIO_111 */
|
|
gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
|
|
};
|
|
|
|
&gpio14 {
|
|
/* GPIO_112-GPIO_119 */
|
|
gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
|
|
};
|
|
|
|
&gpio15 {
|
|
/* GPIO_120-GPIO_127 */
|
|
gpio-line-names =
|
|
"NC", "NC", "NC", "NC", "NC", "NC",
|
|
"GPIO_126_BT_EN",
|
|
"TP902"; /* GPIO_127_JTAG_SEL0 */
|
|
};
|
|
|
|
&gpio16 {
|
|
/* GPIO_128-GPIO_135 */
|
|
gpio-line-names = "", "", "", "", "", "", "", "";
|
|
};
|
|
|
|
&gpio17 {
|
|
/* GPIO_136-GPIO_143 */
|
|
gpio-line-names = "", "", "", "", "", "", "", "";
|
|
};
|
|
|
|
&gpio18 {
|
|
/* GPIO_144-GPIO_151 */
|
|
gpio-line-names =
|
|
"[UFS_REF_CLK]",
|
|
"[UFS_RST_N]",
|
|
"[SPI1_SCLK]", /* HSEC pin 9: GPIO_146_SPI3_CLK */
|
|
"[SPI1_DIN]", /* HSEC pin 11: GPIO_147_SPI3_DI */
|
|
"[SPI1_DOUT]", /* HSEC pin 1: GPIO_148_SPI3_DO */
|
|
"[SPI1_CS]", /* HSEC pin 7: GPIO_149_SPI3_CS0_N */
|
|
"GPIO_150_USER_LED1",
|
|
"GPIO_151_USER_LED2";
|
|
};
|
|
|
|
&gpio19 {
|
|
/* GPIO_152-GPIO_159 */
|
|
gpio-line-names = "NC", "NC", "NC", "NC", "", "", "", "";
|
|
};
|
|
|
|
&gpio20 {
|
|
/* GPIO_160-GPIO_167 */
|
|
gpio-line-names =
|
|
"[SD_CLK]",
|
|
"[SD_CMD]",
|
|
"[SD_DATA0]",
|
|
"[SD_DATA1]",
|
|
"[SD_DATA2]",
|
|
"[SD_DATA3]",
|
|
"", "";
|
|
};
|
|
|
|
&gpio21 {
|
|
/* GPIO_168-GPIO_175 */
|
|
gpio-line-names =
|
|
"[WL_SDIO_CLK]",
|
|
"[WL_SDIO_CMD]",
|
|
"[WL_SDIO_DATA0]",
|
|
"[WL_SDIO_DATA1]",
|
|
"[WL_SDIO_DATA2]",
|
|
"[WL_SDIO_DATA3]",
|
|
"", "";
|
|
};
|
|
|
|
&gpio22 {
|
|
/* GPIO_176-GPIO_183 */
|
|
gpio-line-names =
|
|
"[GPIO_176_PMU_PWR_HOLD]",
|
|
"NA",
|
|
"[SYSCLK_EN]",
|
|
"GPIO_179_WL_WAKEUP_AP",
|
|
"GPIO_180_HDMI_INT",
|
|
"NA",
|
|
"GPIO-F", /* LSEC pin 28: LCD_BL_PWM */
|
|
"[I2C0_SCL]"; /* LSEC pin 15 */
|
|
};
|
|
|
|
&gpio23 {
|
|
/* GPIO_184-GPIO_191 */
|
|
gpio-line-names =
|
|
"[I2C0_SDA]", /* LSEC pin 17 */
|
|
"[I2C1_SCL]", /* Actual SoC I2C1 */
|
|
"[I2C1_SDA]", /* Actual SoC I2C1 */
|
|
"[I2C1_SCL]", /* LSEC pin 19: I2C7_SCL */
|
|
"[I2C1_SDA]", /* LSEC pin 21: I2C7_SDA */
|
|
"GPIO_189_USER_LED3",
|
|
"GPIO_190_USER_LED4",
|
|
"";
|
|
};
|
|
|
|
&gpio24 {
|
|
/* GPIO_192-GPIO_199 */
|
|
gpio-line-names =
|
|
"[PCM_DI]", /* LSEC pin 22: GPIO_192_I2S0_DI */
|
|
"[PCM_DO]", /* LSEC pin 20: GPIO_193_I2S0_DO */
|
|
"[PCM_CLK]", /* LSEC pin 18: GPIO_194_I2S0_XCLK */
|
|
"[PCM_FS]", /* LSEC pin 16: GPIO_195_I2S0_XFS */
|
|
"[GPIO_196_I2S2_DI]",
|
|
"[GPIO_197_I2S2_DO]",
|
|
"[GPIO_198_I2S2_XCLK]",
|
|
"[GPIO_199_I2S2_XFS]";
|
|
};
|
|
|
|
&gpio25 {
|
|
/* GPIO_200-GPIO_207 */
|
|
gpio-line-names =
|
|
"NC",
|
|
"NC",
|
|
"GPIO_202_VBUS_TYPEC",
|
|
"GPIO_203_SD_DET",
|
|
"GPIO_204_PMU12_IRQ_N",
|
|
"GPIO_205_WIFI_ACTIVE",
|
|
"GPIO_206_USBSW_SEL",
|
|
"GPIO_207_BT_ACTIVE";
|
|
};
|
|
|
|
&gpio26 {
|
|
/* GPIO_208-GPIO_215 */
|
|
gpio-line-names =
|
|
"GPIO-A", /* LSEC pin 23: GPIO_208 */
|
|
"GPIO-B", /* LSEC pin 24: GPIO_209 */
|
|
"GPIO-C", /* LSEC pin 25: GPIO_210 */
|
|
"GPIO-D", /* LSEC pin 26: GPIO_211 */
|
|
"GPIO-E", /* LSEC pin 27: GPIO_212 */
|
|
"[PCIE_CLKREQ_N]",
|
|
"[PCIE_WAKE_N]",
|
|
"[SPI0_CLK]"; /* LSEC pin 8: SPI2_CLK */
|
|
};
|
|
|
|
&gpio27 {
|
|
/* GPIO_216-GPIO_223 */
|
|
gpio-line-names =
|
|
"[SPI0_DIN]", /* LSEC pin 10: SPI2_DI */
|
|
"[SPI0_DOUT]", /* LSEC pin 14: SPI2_DO */
|
|
"[SPI0_CS]", /* LSEC pin 12: SPI2_CS0_N */
|
|
"GPIO_219_CC_INT",
|
|
"NC",
|
|
"NC",
|
|
"[PMU_INT]",
|
|
"";
|
|
};
|
|
|
|
&gpio28 {
|
|
/* GPIO_224-GPIO_231 */
|
|
gpio-line-names =
|
|
"", "", "", "", "", "", "", "";
|
|
};
|
|
|
|
&i2c0 {
|
|
/* On Low speed expansion */
|
|
label = "LS-I2C0";
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
|
|
adv7533: adv7533@39 {
|
|
status = "ok";
|
|
compatible = "adi,adv7533";
|
|
reg = <0x39>;
|
|
};
|
|
};
|
|
|
|
&uart3 {
|
|
/* On Low speed expansion */
|
|
label = "LS-UART0";
|
|
status = "okay";
|
|
};
|
|
|
|
&uart4 {
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "ti,wl1837-st";
|
|
enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>;
|
|
max-speed = <3000000>;
|
|
};
|
|
};
|
|
|
|
&i2c7 {
|
|
/* On Low speed expansion */
|
|
label = "LS-I2C1";
|
|
status = "okay";
|
|
};
|
|
|
|
&uart6 {
|
|
/* On Low speed expansion */
|
|
label = "LS-UART1";
|
|
status = "okay";
|
|
};
|
|
|
|
&spi2 {
|
|
/* On Low speed expansion */
|
|
label = "LS-SPI0";
|
|
status = "okay";
|
|
};
|
|
|
|
&spi3 {
|
|
/* On High speed expansion */
|
|
label = "HS-SPI1";
|
|
status = "okay";
|
|
};
|
|
|
|
&dwmmc1 {
|
|
cd-gpios = <&gpio25 3 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd_pmx_func
|
|
&sd_clk_cfg_func
|
|
&sd_cfg_func>;
|
|
vmmc-supply = <&ldo16>;
|
|
vqmmc-supply = <&ldo9>;
|
|
status = "okay";
|
|
};
|
|
|
|
&dwmmc2 { /* WIFI */
|
|
bus-width = <0x4>;
|
|
non-removable;
|
|
broken-cd;
|
|
cap-power-off-card;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdio_pmx_func
|
|
&sdio_clk_cfg_func
|
|
&sdio_cfg_func>;
|
|
/* WL_EN */
|
|
vmmc-supply = <&wlan_en>;
|
|
status = "ok";
|
|
|
|
wlcore: wlcore@2 {
|
|
compatible = "ti,wl1837";
|
|
reg = <2>; /* sdio func num */
|
|
/* WL_IRQ, GPIO_179_WL_WAKEUP_AP */
|
|
interrupt-parent = <&gpio22>;
|
|
interrupts = <3 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
};
|