mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 15:38:51 +09:00
![Hector Palacios](/assets/img/avatar_default.png)
All mii operations require a valid PHY address except the 'device' command, which expects the PHY name rather than the address. Signed-off-by: Hector Palacios <hector.palacios@digi.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
470 lines
12 KiB
C
470 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2001
|
|
* Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
|
|
*/
|
|
|
|
/*
|
|
* MII Utilities
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <miiphy.h>
|
|
|
|
typedef struct _MII_reg_desc_t {
|
|
ushort regno;
|
|
char * name;
|
|
} MII_reg_desc_t;
|
|
|
|
static const MII_reg_desc_t reg_0_5_desc_tbl[] = {
|
|
{ MII_BMCR, "PHY control register" },
|
|
{ MII_BMSR, "PHY status register" },
|
|
{ MII_PHYSID1, "PHY ID 1 register" },
|
|
{ MII_PHYSID2, "PHY ID 2 register" },
|
|
{ MII_ADVERTISE, "Autonegotiation advertisement register" },
|
|
{ MII_LPA, "Autonegotiation partner abilities register" },
|
|
};
|
|
|
|
typedef struct _MII_field_desc_t {
|
|
ushort hi;
|
|
ushort lo;
|
|
ushort mask;
|
|
char * name;
|
|
} MII_field_desc_t;
|
|
|
|
static const MII_field_desc_t reg_0_desc_tbl[] = {
|
|
{ 15, 15, 0x01, "reset" },
|
|
{ 14, 14, 0x01, "loopback" },
|
|
{ 13, 6, 0x81, "speed selection" }, /* special */
|
|
{ 12, 12, 0x01, "A/N enable" },
|
|
{ 11, 11, 0x01, "power-down" },
|
|
{ 10, 10, 0x01, "isolate" },
|
|
{ 9, 9, 0x01, "restart A/N" },
|
|
{ 8, 8, 0x01, "duplex" }, /* special */
|
|
{ 7, 7, 0x01, "collision test enable" },
|
|
{ 5, 0, 0x3f, "(reserved)" }
|
|
};
|
|
|
|
static const MII_field_desc_t reg_1_desc_tbl[] = {
|
|
{ 15, 15, 0x01, "100BASE-T4 able" },
|
|
{ 14, 14, 0x01, "100BASE-X full duplex able" },
|
|
{ 13, 13, 0x01, "100BASE-X half duplex able" },
|
|
{ 12, 12, 0x01, "10 Mbps full duplex able" },
|
|
{ 11, 11, 0x01, "10 Mbps half duplex able" },
|
|
{ 10, 10, 0x01, "100BASE-T2 full duplex able" },
|
|
{ 9, 9, 0x01, "100BASE-T2 half duplex able" },
|
|
{ 8, 8, 0x01, "extended status" },
|
|
{ 7, 7, 0x01, "(reserved)" },
|
|
{ 6, 6, 0x01, "MF preamble suppression" },
|
|
{ 5, 5, 0x01, "A/N complete" },
|
|
{ 4, 4, 0x01, "remote fault" },
|
|
{ 3, 3, 0x01, "A/N able" },
|
|
{ 2, 2, 0x01, "link status" },
|
|
{ 1, 1, 0x01, "jabber detect" },
|
|
{ 0, 0, 0x01, "extended capabilities" },
|
|
};
|
|
|
|
static const MII_field_desc_t reg_2_desc_tbl[] = {
|
|
{ 15, 0, 0xffff, "OUI portion" },
|
|
};
|
|
|
|
static const MII_field_desc_t reg_3_desc_tbl[] = {
|
|
{ 15, 10, 0x3f, "OUI portion" },
|
|
{ 9, 4, 0x3f, "manufacturer part number" },
|
|
{ 3, 0, 0x0f, "manufacturer rev. number" },
|
|
};
|
|
|
|
static const MII_field_desc_t reg_4_desc_tbl[] = {
|
|
{ 15, 15, 0x01, "next page able" },
|
|
{ 14, 14, 0x01, "(reserved)" },
|
|
{ 13, 13, 0x01, "remote fault" },
|
|
{ 12, 12, 0x01, "(reserved)" },
|
|
{ 11, 11, 0x01, "asymmetric pause" },
|
|
{ 10, 10, 0x01, "pause enable" },
|
|
{ 9, 9, 0x01, "100BASE-T4 able" },
|
|
{ 8, 8, 0x01, "100BASE-TX full duplex able" },
|
|
{ 7, 7, 0x01, "100BASE-TX able" },
|
|
{ 6, 6, 0x01, "10BASE-T full duplex able" },
|
|
{ 5, 5, 0x01, "10BASE-T able" },
|
|
{ 4, 0, 0x1f, "xxx to do" },
|
|
};
|
|
|
|
static const MII_field_desc_t reg_5_desc_tbl[] = {
|
|
{ 15, 15, 0x01, "next page able" },
|
|
{ 14, 14, 0x01, "acknowledge" },
|
|
{ 13, 13, 0x01, "remote fault" },
|
|
{ 12, 12, 0x01, "(reserved)" },
|
|
{ 11, 11, 0x01, "asymmetric pause able" },
|
|
{ 10, 10, 0x01, "pause able" },
|
|
{ 9, 9, 0x01, "100BASE-T4 able" },
|
|
{ 8, 8, 0x01, "100BASE-X full duplex able" },
|
|
{ 7, 7, 0x01, "100BASE-TX able" },
|
|
{ 6, 6, 0x01, "10BASE-T full duplex able" },
|
|
{ 5, 5, 0x01, "10BASE-T able" },
|
|
{ 4, 0, 0x1f, "xxx to do" },
|
|
};
|
|
typedef struct _MII_field_desc_and_len_t {
|
|
const MII_field_desc_t *pdesc;
|
|
ushort len;
|
|
} MII_field_desc_and_len_t;
|
|
|
|
static const MII_field_desc_and_len_t desc_and_len_tbl[] = {
|
|
{ reg_0_desc_tbl, ARRAY_SIZE(reg_0_desc_tbl) },
|
|
{ reg_1_desc_tbl, ARRAY_SIZE(reg_1_desc_tbl) },
|
|
{ reg_2_desc_tbl, ARRAY_SIZE(reg_2_desc_tbl) },
|
|
{ reg_3_desc_tbl, ARRAY_SIZE(reg_3_desc_tbl) },
|
|
{ reg_4_desc_tbl, ARRAY_SIZE(reg_4_desc_tbl) },
|
|
{ reg_5_desc_tbl, ARRAY_SIZE(reg_5_desc_tbl) },
|
|
};
|
|
|
|
static void dump_reg(
|
|
ushort regval,
|
|
const MII_reg_desc_t *prd,
|
|
const MII_field_desc_and_len_t *pdl);
|
|
|
|
static int special_field(
|
|
ushort regno,
|
|
const MII_field_desc_t *pdesc,
|
|
ushort regval);
|
|
|
|
static void MII_dump_0_to_5(
|
|
ushort regvals[6],
|
|
uchar reglo,
|
|
uchar reghi)
|
|
{
|
|
ulong i;
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
if ((reglo <= i) && (i <= reghi))
|
|
dump_reg(regvals[i], ®_0_5_desc_tbl[i],
|
|
&desc_and_len_tbl[i]);
|
|
}
|
|
}
|
|
|
|
static void dump_reg(
|
|
ushort regval,
|
|
const MII_reg_desc_t *prd,
|
|
const MII_field_desc_and_len_t *pdl)
|
|
{
|
|
ulong i;
|
|
ushort mask_in_place;
|
|
const MII_field_desc_t *pdesc;
|
|
|
|
printf("%u. (%04hx) -- %s --\n",
|
|
prd->regno, regval, prd->name);
|
|
|
|
for (i = 0; i < pdl->len; i++) {
|
|
pdesc = &pdl->pdesc[i];
|
|
|
|
mask_in_place = pdesc->mask << pdesc->lo;
|
|
|
|
printf(" (%04hx:%04x) %u.",
|
|
mask_in_place,
|
|
regval & mask_in_place,
|
|
prd->regno);
|
|
|
|
if (special_field(prd->regno, pdesc, regval)) {
|
|
}
|
|
else {
|
|
if (pdesc->hi == pdesc->lo)
|
|
printf("%2u ", pdesc->lo);
|
|
else
|
|
printf("%2u-%2u", pdesc->hi, pdesc->lo);
|
|
printf(" = %5u %s",
|
|
(regval & mask_in_place) >> pdesc->lo,
|
|
pdesc->name);
|
|
}
|
|
printf("\n");
|
|
|
|
}
|
|
printf("\n");
|
|
}
|
|
|
|
/* Special fields:
|
|
** 0.6,13
|
|
** 0.8
|
|
** 2.15-0
|
|
** 3.15-0
|
|
** 4.4-0
|
|
** 5.4-0
|
|
*/
|
|
|
|
static int special_field(
|
|
ushort regno,
|
|
const MII_field_desc_t *pdesc,
|
|
ushort regval)
|
|
{
|
|
if ((regno == MII_BMCR) && (pdesc->lo == 6)) {
|
|
ushort speed_bits = regval & (BMCR_SPEED1000 | BMCR_SPEED100);
|
|
printf("%2u,%2u = b%u%u speed selection = %s Mbps",
|
|
6, 13,
|
|
(regval >> 6) & 1,
|
|
(regval >> 13) & 1,
|
|
speed_bits == BMCR_SPEED1000 ? "1000" :
|
|
speed_bits == BMCR_SPEED100 ? "100" :
|
|
"10");
|
|
return 1;
|
|
}
|
|
|
|
else if ((regno == MII_BMCR) && (pdesc->lo == 8)) {
|
|
printf("%2u = %5u duplex = %s",
|
|
pdesc->lo,
|
|
(regval >> pdesc->lo) & 1,
|
|
((regval >> pdesc->lo) & 1) ? "full" : "half");
|
|
return 1;
|
|
}
|
|
|
|
else if ((regno == MII_ADVERTISE) && (pdesc->lo == 0)) {
|
|
ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
|
|
printf("%2u-%2u = %5u selector = %s",
|
|
pdesc->hi, pdesc->lo, sel_bits,
|
|
sel_bits == PHY_ANLPAR_PSB_802_3 ?
|
|
"IEEE 802.3" :
|
|
sel_bits == PHY_ANLPAR_PSB_802_9 ?
|
|
"IEEE 802.9 ISLAN-16T" :
|
|
"???");
|
|
return 1;
|
|
}
|
|
|
|
else if ((regno == MII_LPA) && (pdesc->lo == 0)) {
|
|
ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
|
|
printf("%2u-%2u = %u selector = %s",
|
|
pdesc->hi, pdesc->lo, sel_bits,
|
|
sel_bits == PHY_ANLPAR_PSB_802_3 ?
|
|
"IEEE 802.3" :
|
|
sel_bits == PHY_ANLPAR_PSB_802_9 ?
|
|
"IEEE 802.9 ISLAN-16T" :
|
|
"???");
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static char last_op[2];
|
|
static uint last_data;
|
|
static uint last_addr_lo;
|
|
static uint last_addr_hi;
|
|
static uint last_reg_lo;
|
|
static uint last_reg_hi;
|
|
static uint last_mask;
|
|
|
|
static void extract_range(
|
|
char * input,
|
|
unsigned char * plo,
|
|
unsigned char * phi)
|
|
{
|
|
char * end;
|
|
*plo = simple_strtoul(input, &end, 16);
|
|
if (*end == '-') {
|
|
end++;
|
|
*phi = simple_strtoul(end, NULL, 16);
|
|
}
|
|
else {
|
|
*phi = *plo;
|
|
}
|
|
}
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
static int do_mii(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
char op[2];
|
|
unsigned char addrlo, addrhi, reglo, reghi;
|
|
unsigned char addr, reg;
|
|
unsigned short data, mask;
|
|
int rcode = 0;
|
|
const char *devname;
|
|
|
|
if (argc < 2)
|
|
return CMD_RET_USAGE;
|
|
|
|
#if defined(CONFIG_MII_INIT)
|
|
mii_init ();
|
|
#endif
|
|
|
|
/*
|
|
* We use the last specified parameters, unless new ones are
|
|
* entered.
|
|
*/
|
|
op[0] = last_op[0];
|
|
op[1] = last_op[1];
|
|
addrlo = last_addr_lo;
|
|
addrhi = last_addr_hi;
|
|
reglo = last_reg_lo;
|
|
reghi = last_reg_hi;
|
|
data = last_data;
|
|
mask = last_mask;
|
|
|
|
if ((flag & CMD_FLAG_REPEAT) == 0) {
|
|
op[0] = argv[1][0];
|
|
if (strlen(argv[1]) > 1)
|
|
op[1] = argv[1][1];
|
|
else
|
|
op[1] = '\0';
|
|
|
|
if (argc >= 3)
|
|
extract_range(argv[2], &addrlo, &addrhi);
|
|
if (argc >= 4)
|
|
extract_range(argv[3], ®lo, ®hi);
|
|
if (argc >= 5)
|
|
data = simple_strtoul(argv[4], NULL, 16);
|
|
if (argc >= 6)
|
|
mask = simple_strtoul(argv[5], NULL, 16);
|
|
}
|
|
|
|
if (addrhi > 31 && strncmp(op, "de", 2)) {
|
|
printf("Incorrect PHY address. Range should be 0-31\n");
|
|
return CMD_RET_USAGE;
|
|
}
|
|
|
|
/* use current device */
|
|
devname = miiphy_get_current_dev();
|
|
|
|
/*
|
|
* check info/read/write.
|
|
*/
|
|
if (op[0] == 'i') {
|
|
unsigned char j, start, end;
|
|
unsigned int oui;
|
|
unsigned char model;
|
|
unsigned char rev;
|
|
|
|
/*
|
|
* Look for any and all PHYs. Valid addresses are 0..31.
|
|
*/
|
|
if (argc >= 3) {
|
|
start = addrlo; end = addrhi;
|
|
} else {
|
|
start = 0; end = 31;
|
|
}
|
|
|
|
for (j = start; j <= end; j++) {
|
|
if (miiphy_info (devname, j, &oui, &model, &rev) == 0) {
|
|
printf("PHY 0x%02X: "
|
|
"OUI = 0x%04X, "
|
|
"Model = 0x%02X, "
|
|
"Rev = 0x%02X, "
|
|
"%3dbase%s, %s\n",
|
|
j, oui, model, rev,
|
|
miiphy_speed (devname, j),
|
|
miiphy_is_1000base_x (devname, j)
|
|
? "X" : "T",
|
|
(miiphy_duplex (devname, j) == FULL)
|
|
? "FDX" : "HDX");
|
|
}
|
|
}
|
|
} else if (op[0] == 'r') {
|
|
for (addr = addrlo; addr <= addrhi; addr++) {
|
|
for (reg = reglo; reg <= reghi; reg++) {
|
|
data = 0xffff;
|
|
if (miiphy_read (devname, addr, reg, &data) != 0) {
|
|
printf(
|
|
"Error reading from the PHY addr=%02x reg=%02x\n",
|
|
addr, reg);
|
|
rcode = 1;
|
|
} else {
|
|
if ((addrlo != addrhi) || (reglo != reghi))
|
|
printf("addr=%02x reg=%02x data=",
|
|
(uint)addr, (uint)reg);
|
|
printf("%04X\n", data & 0x0000FFFF);
|
|
}
|
|
}
|
|
if ((addrlo != addrhi) && (reglo != reghi))
|
|
printf("\n");
|
|
}
|
|
} else if (op[0] == 'w') {
|
|
for (addr = addrlo; addr <= addrhi; addr++) {
|
|
for (reg = reglo; reg <= reghi; reg++) {
|
|
if (miiphy_write (devname, addr, reg, data) != 0) {
|
|
printf("Error writing to the PHY addr=%02x reg=%02x\n",
|
|
addr, reg);
|
|
rcode = 1;
|
|
}
|
|
}
|
|
}
|
|
} else if (op[0] == 'm') {
|
|
for (addr = addrlo; addr <= addrhi; addr++) {
|
|
for (reg = reglo; reg <= reghi; reg++) {
|
|
unsigned short val = 0;
|
|
if (miiphy_read(devname, addr,
|
|
reg, &val)) {
|
|
printf("Error reading from the PHY");
|
|
printf(" addr=%02x", addr);
|
|
printf(" reg=%02x\n", reg);
|
|
rcode = 1;
|
|
} else {
|
|
val = (val & ~mask) | (data & mask);
|
|
if (miiphy_write(devname, addr,
|
|
reg, val)) {
|
|
printf("Error writing to the PHY");
|
|
printf(" addr=%02x", addr);
|
|
printf(" reg=%02x\n", reg);
|
|
rcode = 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
} else if (strncmp(op, "du", 2) == 0) {
|
|
ushort regs[6];
|
|
int ok = 1;
|
|
if ((reglo > 5) || (reghi > 5)) {
|
|
printf(
|
|
"The MII dump command only formats the "
|
|
"standard MII registers, 0-5.\n");
|
|
return 1;
|
|
}
|
|
for (addr = addrlo; addr <= addrhi; addr++) {
|
|
for (reg = reglo; reg < reghi + 1; reg++) {
|
|
if (miiphy_read(devname, addr, reg, ®s[reg]) != 0) {
|
|
ok = 0;
|
|
printf(
|
|
"Error reading from the PHY addr=%02x reg=%02x\n",
|
|
addr, reg);
|
|
rcode = 1;
|
|
}
|
|
}
|
|
if (ok)
|
|
MII_dump_0_to_5(regs, reglo, reghi);
|
|
printf("\n");
|
|
}
|
|
} else if (strncmp(op, "de", 2) == 0) {
|
|
if (argc == 2)
|
|
miiphy_listdev ();
|
|
else
|
|
miiphy_set_current_dev (argv[2]);
|
|
} else {
|
|
return CMD_RET_USAGE;
|
|
}
|
|
|
|
/*
|
|
* Save the parameters for repeats.
|
|
*/
|
|
last_op[0] = op[0];
|
|
last_op[1] = op[1];
|
|
last_addr_lo = addrlo;
|
|
last_addr_hi = addrhi;
|
|
last_reg_lo = reglo;
|
|
last_reg_hi = reghi;
|
|
last_data = data;
|
|
last_mask = mask;
|
|
|
|
return rcode;
|
|
}
|
|
|
|
/***************************************************/
|
|
|
|
U_BOOT_CMD(
|
|
mii, 6, 1, do_mii,
|
|
"MII utility commands",
|
|
"device - list available devices\n"
|
|
"mii device <devname> - set current device\n"
|
|
"mii info <addr> - display MII PHY info\n"
|
|
"mii read <addr> <reg> - read MII PHY <addr> register <reg>\n"
|
|
"mii write <addr> <reg> <data> - write MII PHY <addr> register <reg>\n"
|
|
"mii modify <addr> <reg> <data> <mask> - modify MII PHY <addr> register <reg>\n"
|
|
" updating bits identified in <mask>\n"
|
|
"mii dump <addr> <reg> - pretty-print <addr> <reg> (0-5 only)\n"
|
|
"Addr and/or reg may be ranges, e.g. 2-7."
|
|
);
|