mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-18 07:58:52 +09:00
![Lokesh Vutla](/assets/img/avatar_default.png)
Update the README to add support for K2G EVM. Also - Add steps on how to use MMC boot - Fix load address when using CCS - Update build target to u-boot.bin from u-boot-dtb.bin as all ks2 platforms uses DT. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
195 lines
8.2 KiB
Plaintext
195 lines
8.2 KiB
Plaintext
U-Boot port for Texas Instruments Keystone II EVM boards
|
|
========================================================
|
|
|
|
Author: Murali Karicheri <m-karicheri2@ti.com>
|
|
|
|
This README has information on the U-Boot port for K2HK, K2E, and K2L EVM boards.
|
|
Documentation for this board can be found at
|
|
http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx
|
|
https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html
|
|
https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html
|
|
|
|
The K2HK board is based on Texas Instruments Keystone2 family of SoCs: K2H, K2K.
|
|
More details on these SoCs are available at company websites
|
|
K2K: http://www.ti.com/product/tci6638k2k
|
|
K2H: http://www.ti.com/product/tci6638k2h
|
|
|
|
The K2E SoC details are available at
|
|
http://www.ti.com/lit/ds/symlink/66ak2e05.pdf
|
|
|
|
The K2L SoC details are available at
|
|
http://www.ti.com/lit/ds/symlink/tci6630k2l.pdf
|
|
|
|
The K2G SoC details are available at
|
|
http://www.ti.com/lit/ds/symlink/66ak2g02.pdf
|
|
|
|
Board configuration:
|
|
====================
|
|
|
|
Some of the peripherals that are configured by U-Boot
|
|
+------+-------+-------+-----------+-----------+-------+-------+----+
|
|
| |DDR3 |NAND |MSM SRAM |ETH ports |UART |I2C |SPI |
|
|
+------+-------+-------+-----------+-----------+-------+-------+----+
|
|
|K2HK |2 |512MB |6MB |4(2) |2 |3 |3 |
|
|
|K2E |4 |512MB |2MB |8(2) |2 |3 |3 |
|
|
|K2L |2 |512MB |2MB |4(2) |4 |3 |3 |
|
|
|K2G |2 |256MB |1MB |1 |1 |1 |1 |
|
|
+------+-------+-------+-----------+-----------+-------+-------+----+
|
|
|
|
There are only 2 eth port installed on the boards.
|
|
|
|
There are separate PLLs to drive clocks to Tetris ARM and Peripherals.
|
|
To bring up SMP Linux on this board, there is a boot monitor
|
|
code that will be installed in MSMC SRAM. There is command available
|
|
to install this image from U-Boot.
|
|
|
|
The port related files can be found at following folders
|
|
keystone2 SoC related files: arch/arm/cpu/armv7/keystone/
|
|
EVMs board files: board/ti/k2s_evm/
|
|
|
|
Board configuration files:
|
|
include/configs/k2hk_evm.h
|
|
include/configs/k2e_evm.h
|
|
include/configs/k2l_evm.h
|
|
include/configs/k2g_evm.h
|
|
|
|
As U-Boot is migrating to Kconfig there is also board defconfig files
|
|
configs/k2e_evm_defconfig
|
|
configs/k2hk_evm_defconfig
|
|
configs/k2l_evm_defconfig
|
|
configs/k2g_evm_defconfig
|
|
|
|
Supported boot modes:
|
|
- SPI NOR boot
|
|
- AEMIF NAND boot
|
|
- UART boot
|
|
- MMC boot (Only on K2G)
|
|
|
|
Supported image formats:
|
|
- u-boot.bin: for loading and running u-boot.bin through
|
|
Texas Instruments code composure studio (CCS) and for UART boot.
|
|
- u-boot-spi.gph: gpimage for programming SPI NOR flash for SPI NOR boot
|
|
- MLO: gpimage for programming AEMIF NAND flash for NAND boot, MMC boot.
|
|
|
|
Build instructions:
|
|
===================
|
|
Examples for k2hk, for k2e, k2l and k2g just replace k2hk prefix accordingly.
|
|
Don't forget to add ARCH=arm and CROSS_COMPILE.
|
|
|
|
To build u-boot.bin, u-boot-spi.gph, MLO:
|
|
>make k2hk_evm_defconfig
|
|
>make
|
|
|
|
Load and Run U-Boot on keystone EVMs using CCS
|
|
=========================================
|
|
|
|
Need Code Composer Studio (CCS) installed on a PC to load and run u-boot.bin
|
|
on EVM. See instructions at below link for installing CCS on a Windows PC.
|
|
http://processors.wiki.ti.com/index.php/MCSDK_UG_Chapter_Getting_Started#
|
|
Installing_Code_Composer_Studio
|
|
Use u-boot.bin from the build folder for loading and running U-Boot binary
|
|
on EVM. Follow instructions at
|
|
K2HK http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup
|
|
K2E http://processors.wiki.ti.com/index.php/EVMK2E_Hardware_Setup
|
|
K2L http://processors.wiki.ti.com/index.php/TCIEVMK2L_Hardware_Setup
|
|
K2G http://processors.wiki.ti.com/index.php/66AK2G02_GP_EVM_Hardware_Setup
|
|
|
|
to configure SW1 dip switch to use "No Boot/JTAG DSP Little Endian Boot Mode"
|
|
and Power ON the EVM. Follow instructions to connect serial port of EVM to
|
|
PC and start TeraTerm or Hyper Terminal.
|
|
|
|
Start CCS on a Windows machine and Launch Target
|
|
configuration as instructed at http://processors.wiki.ti.com/index.php/
|
|
MCSDK_UG_Chapter_Exploring#Loading_and_Running_U-Boot_on_EVM_through_CCS.
|
|
The instructions provided in the above link uses a script for
|
|
loading the U-Boot binary on the target EVM. Instead do the following:-
|
|
|
|
1. Right click to "Texas Instruments XDS2xx USB Emulator_0/CortexA15_1 core (D
|
|
is connected: Unknown)" at the debug window (This is created once Target
|
|
configuration is launched) and select "Connect Target".
|
|
2. Once target connect is successful, choose Tools->Load Memory option from the
|
|
top level menu. At the Load Memory window, choose the file u-boot.bin
|
|
through "Browse" button and click "next >" button. In the next window, enter
|
|
Start address as 0xc000000, choose Type-size "32 bits" and click "Finish"
|
|
button.
|
|
3. Click View -> Registers from the top level menu to view registers window.
|
|
4. From Registers, window expand "Core Registers" to view PC. Edit PC value
|
|
to be 0xc000000. From the "Run" top level menu, select "Free Run"
|
|
5. The U-Boot prompt is shown at the Tera Term/ Hyper terminal console as
|
|
below and type any key to stop autoboot as instructed :=
|
|
|
|
U-Boot 2014.04-rc1-00201-gc215b5a (Mar 21 2014 - 12:47:59)
|
|
|
|
I2C: ready
|
|
Detected SO-DIMM [SQR-SD3T-2G1333SED]
|
|
DRAM: 1.1 GiB
|
|
NAND: 512 MiB
|
|
Net: K2HK_EMAC
|
|
Warning: K2HK_EMAC using MAC address from net device
|
|
, K2HK_EMAC1, K2HK_EMAC2, K2HK_EMAC3
|
|
Hit any key to stop autoboot: 0
|
|
|
|
SPI NOR Flash programming instructions
|
|
======================================
|
|
U-Boot image can be flashed to first 512KB of the NOR flash using following
|
|
instructions:
|
|
|
|
1. Start CCS and run U-Boot as described above.
|
|
2. Suspend Target. Select Run -> Suspend from top level menu
|
|
CortexA15_1 (Free Running)"
|
|
3. Load u-boot-spi.gph binary from build folder on to DDR address 0x87000000
|
|
through CCS as described in step 2 of "Load and Run U-Boot on K2HK/K2E/K2L
|
|
EVM using CCS", but using address 0x87000000.
|
|
4. Free Run the target as described earlier (step 4) to get U-Boot prompt
|
|
5. At the U-Boot console type following to setup U-Boot environment variables.
|
|
setenv addr_uboot 0x87000000
|
|
setenv filesize <size in hex of u-boot-spi.gph rounded to hex 0x10000>
|
|
run burn_uboot_spi
|
|
Once U-Boot prompt is available, Power OFF the EVM. Set the SW1 dip switch
|
|
to "SPI Little Endian Boot mode" as per instruction at
|
|
http://processors.wiki.ti.com/index.php/*_Hardware_Setup.
|
|
6. Power ON the EVM. The EVM now boots with U-Boot image on the NOR flash.
|
|
|
|
AEMIF NAND Flash programming instructions
|
|
======================================
|
|
U-Boot image can be flashed to first 1024KB of the NAND flash using following
|
|
instructions:
|
|
|
|
1. Start CCS and run U-Boot as described above.
|
|
2. Suspend Target. Select Run -> Suspend from top level menu
|
|
CortexA15_1 (Free Running)"
|
|
3. Load MLO binary from build folder on to DDR address 0x87000000
|
|
through CCS as described in step 2 of "Load and Run U-Boot on K2HK EVM
|
|
using CCS", but using address 0x87000000.
|
|
4. Free Run the target as described earlier (step 4) to get U-Boot prompt
|
|
5. At the U-Boot console type following to setup U-Boot environment variables.
|
|
setenv filesize <size in hex of MLO rounded to hex 0x10000>
|
|
run burn_uboot_nand
|
|
Once U-Boot prompt is available, Power OFF the EVM. Set the SW1 dip switch
|
|
to "ARM NAND Boot mode" as per instruction at
|
|
http://processors.wiki.ti.com/index.php/*_Hardware_Setup.
|
|
6. Power ON the EVM. The EVM now boots with U-Boot image on the NAND flash.
|
|
|
|
Load and Run U-Boot on keystone EVMs using UART download
|
|
========================================================
|
|
|
|
Open BMC and regular UART terminals.
|
|
|
|
1. On the regular UART port start xmodem transfer of the u-boot.bin
|
|
2. Using BMC terminal set the ARM-UART bootmode and reboot the EVM
|
|
BMC> bootmode #4
|
|
MBC> reboot
|
|
3. When xmodem is complete you should see the U-Boot starts on the UART port
|
|
|
|
Load and Run U-Boot on K2G EVMs using MMC
|
|
========================================================
|
|
|
|
Open BMC and regular UART terminals.
|
|
|
|
1. Set the SW3 dip switch to "ARM MMC Boot mode" as per instruction at
|
|
http://processors.wiki.ti.com/index.php/66AK2G02_GP_EVM_Hardware_Setup
|
|
2. Create SD card partitions as per steps given in Hardware Setup Guide.
|
|
3. Copy MLO to Boot Partition.
|
|
4. Insert SD card and Power on the EVM.
|
|
The EVM now boots with U-Boot image from SD card.
|